Print

[360360]

hi,
i have beeen flashing 360 now for a couple of years and i have now come across some strange thing happing with jf,

i can dump the firmware and flash ixtreme no problem what so ever, but after ixtreme 1.1 has been flashed to the liteon 7xxxxx drive i can no longer dump the firmware again to test, it gives an error when i try and run dvdkey32 again

***WARNING*** serial data is bad

any one got an answer to this, i have tried it with haalf a dozen drives now and the outcome is the same.

never had this problem before, i have tried on 3 different pc and its the same outcome once the ixtreme has been fllashed, i can dump the firmware all day long as long as i dont flash ixtreme

forgot to mention i have tried the maximus xtractor and the ck3 pro rev d and still the same issues

This post has been edited by 360360: Jul 21 2010, 04:19 PM

[OggyUK]

LT is based off of 93450c firmware.

No serial output.

[ImRickJamesB1tch]

What OggyUK said...

Also it no longer iXtreme 1.1, it just Lite Touch 1.1. Only way to get the dvdkey from a drive with LT on it is to do the MRA hack to read the firmware, regardless of it being a 74850c or newer.

[360360]

ahhhhhhhhhhhhh its been bugging me all day long -----

right i see, ive never tried to dump the  firmware again after ive flashed it ,

so as long as i have the dummy or  lite_cfw i can just load them into the dvdtab if i ever needed to replace a damaged drive

[OggyUK]

Yup,

Or, if you  use the later revisions of JungleFlasher, you can use Dummy From KeyDB to rebuild a dummy with a key against the drive attachedd (if key is in db)

[360360]

QUOTE(OggyUK @ Jul 21 2010, 08:03 PM)

Yup,

Or, if you  use the later revisions of JungleFlasher, you can use Dummy From KeyDB to rebuild a dummy with a key against the drive attachedd (if key is in db)

sweet, nice to know....

thanks for the info, need to start reading in the forums a bit more, t

hanks for answering my questions promptly , Appreciated. (IMG:style_emoticons/default/beerchug.gif)