Topic: Is This Ms28 Dead....? (Read 45 times)

benitez1 · « **on:** February 11, 2010, 11:55:00 AM »

I have a MS28 drive which i can get into vendor mode but will not flash at all, i even tried bad flash in dos but it just hangs.

Parallel flash found with Status 0x70

Sending Device ID request to port 0xD000
Manufacturer ID: 0xBF
Device ID: 0xB6
Flash Name: SST(SST39SF020)
Flash Size: 262144 bytes

but when i try to flash just keeps giving me,

Getting Status from port 0xD000
Invalid Status 0x0

Can this drive be salvaged or is it dead, any help would be appreciated.

hardie · « **Reply #1 on:** February 11, 2010, 12:21:00 PM »

have you read the drive before you flash?

benitez1 · « **Reply #2 on:** February 11, 2010, 12:44:00 PM »

QUOTE(hardie @ Feb 11 2010, 07:21 PM)

have you read the drive before you flash?

A friend messed it up trying to flash, i have the key but i cant get it to write firmware to the drive always status 0x0.

grimreaper204 · « **Reply #3 on:** February 11, 2010, 08:31:00 PM »

You are getting flash properties so you are fine, make a USB boot disc using Iprep and flash in dos, or use Iprep to make a folder in C: then use NTFS4DOS to boot into dos and do the whole process, lots of tutorials for this just look up samsung dos flashing, ez pz

goodluck

Author Topic: Is This Ms28 Dead....? (Read 45 times)