xboxscene.org forums

Pages: 1 [2]

Author Topic: ( Test ) (ss) Samsung Totally Non-stealth!  (Read 364 times)

fattrain

  • Archived User
  • Newbie
  • *
  • Posts: 7
( Test ) (ss) Samsung Totally Non-stealth!
« Reply #15 on: January 24, 2010, 07:00:00 PM »

TESTED FULLY AND HERE ARE THE RESULTS:

Totally Non Stealth 0.1

Open Tray error for EVERY backup (verified or not) and even every RETAIL disc as well...

I was using as MS25. Tried the ms25 fw, AND even the ms28 firmware (spoofed) and still no luck...


Once that firmware is install Jungle Flasher will no longer detect your drive!!! I got around this by doing the following:

Switch to your correct port your drive is hooked too:

Then switch to a different port and click the Intro/Device ID button

It will tell you to power cycle the drive...
It will say sending comand . . . . . . . . . .

While it is doing that switch the port back to the port its hooked up to from the dropdown menu in the upper left, then power off the drive then on again just like usual...

It should put it in vendor mode and recognize the drive....

Kind of a "JANKY" work around but it works...

DEFINITELY HAVE TO REMOVE THIS FW or FIX IT SS (I don't think its any good period in its current state).

Glad i could help.
Logged

guffedk

  • Archived User
  • Newbie
  • *
  • Posts: 12
( Test ) (ss) Samsung Totally Non-stealth!
« Reply #16 on: January 25, 2010, 02:19:00 AM »

QUOTE(fattrain @ Jan 25 2010, 03:00 AM) View Post

TESTED FULLY AND HERE ARE THE RESULTS:

Totally Non Stealth 0.1

Open Tray error for EVERY backup (verified or not) and even every RETAIL disc as well...

I was using as MS25. Tried the ms25 fw, AND even the ms28 firmware (spoofed) and still no luck...
Once that firmware is install Jungle Flasher will no longer detect your drive!!! I got around this by doing the following:

Switch to your correct port your drive is hooked too:

Then switch to a different port and click the Intro/Device ID button

It will tell you to power cycle the drive...
It will say sending comand . . . . . . . . . .

While it is doing that switch the port back to the port its hooked up to from the dropdown menu in the upper left, then power off the drive then on again just like usual...

It should put it in vendor mode and recognize the drive....

Kind of a "JANKY" work around but it works...

DEFINITELY HAVE TO REMOVE THIS FW or FIX IT SS (I don't think its any good period in its current state).

Glad i could help.

(SS) write before.
Year know that
http://guf4you.dk/sh...ic.php?f=26&t=5

But this projekt are on standby. Maybe LT comes to samsung so will this firmware not be needed
Logged

Secret-Service

  • Archived User
  • Newbie
  • *
  • Posts: 46
( Test ) (ss) Samsung Totally Non-stealth!
« Reply #17 on: January 25, 2010, 05:03:00 AM »

( TEST )Features (SS) Samsung Totally Non-Stealth

Based on the Xtreme firmware 52
(Test 0.2) Other bugs fixet
(Test 0.2) DVD-key location fixet.
(Test 0.1) All checks have been removed. No splitvid, no jitter fix, from Xtreme firmware 52.
REMEMBER: This is a test firmware not a finale. And the firmware is not tested before.

Use on Xbox Live at own risk.

This firmware is based on the firmware from C4EVA. All credits to C4EVA.

Remember to stealth you backups 100% splitvid and all others !
More info:

http://guf4you.dk/sh...6...13&p=64#p64
http://twitter.com/SS_Firmware
Logged

guffedk

  • Archived User
  • Newbie
  • *
  • Posts: 12
( Test ) (ss) Samsung Totally Non-stealth!
« Reply #18 on: January 27, 2010, 09:47:00 AM »

I get maybe a Sammy drive soon so i will test it!
Logged

skinsfan05

  • Archived User
  • Newbie
  • *
  • Posts: 3
( Test ) (ss) Samsung Totally Non-stealth!
« Reply #19 on: March 01, 2010, 11:21:00 PM »

I have 5.3a on my samsung.  What makes this better?
Logged
Pages: 1 [2]