xboxscene.org forums

Pages: 1 2 [3] 4 5 ... 9

Author Topic: iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method  (Read 1099 times)

Ranger72

  • Archived User
  • Hero Member
  • *
  • Posts: 3746
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #30 on: December 02, 2009, 02:14:00 PM »
QUOTE(jokerbrazil @ Dec 2 2009, 02:51 PM) View Post

Hello there.

I did as the image + 22ohm resistor etc..  ( Ck3tool + Dosflash32 V1.8 ) Read the firmware  but i'v got a problem.

The orig.bin extracted dont open on Jungle flash 1.67 neither the hacked ix1.6  huh.gif

Orig.bin extracted shows ff ff ff on Hexadecimal.  But the hacked seems ok.
The drive still ok ( i'v made stock traces again on PCB and the drive is working. )

Anyone has some idea ?? rolleyes.gif
JOKEr


you have to open the firmware as TARGET and NOT source.
Logged

_MRA_

  • Archived User
  • Newbie
  • *
  • Posts: 2
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #31 on: December 02, 2009, 05:21:00 PM »
QUOTE(jokerbrazil @ Dec 2 2009, 08:51 PM) *

Hello there.

I did as the image + 22ohm resistor etc..  ( Ck3tool + Dosflash32 V1.8 ) Read the firmware  but i'v got a problem.

The orig.bin extracted dont open on Jungle flash 1.67 neither the hacked ix1.6  huh.gif

Orig.bin extracted shows ff ff ff on Hexadecimal.  But the hacked seems ok.
The drive still ok ( i'v made stock traces again on PCB and the drive is working. )

Anyone has some idea ?? rolleyes.gif
JOKEr


You forgot to put the switch in position 2 before hitting "read"...
Logged

jokerbrazil

  • Archived User
  • Jr. Member
  • *
  • Posts: 58
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #32 on: December 02, 2009, 07:26:00 PM »
QUOTE(_MRA_ @ Dec 3 2009, 01:21 AM) View Post

You forgot to put the switch in position 2 before hitting "read"...


I made a Switch for 2 position as show de image. Otherwise the drive dont read because get's 0x52 status .

Tomorrow i'll try another time and see how goes on another new drive. I post if get a perfect Dump ^^


(I have no problems on soldering the PCB just to clear things  biggrin.gif  )



JOKEr





QUOTE(Ranger72 @ Dec 2 2009, 10:14 PM) View Post

you have to open the firmware as TARGET and NOT source.


No problem with that because i openned orig.bin on hexaedit . ( Hacked 1.6 is fine but orig extracted was a bad dump ff ff ff  )

I was wondering about Ck3 coud be interfering on something or i'll just try the first method "epox remove..." and see what's going on.

JOKEr
Logged

jokerbrazil

  • Archived User
  • Jr. Member
  • *
  • Posts: 58
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #33 on: December 03, 2009, 05:54:00 AM »
I just figure out what was happening.  It's my Ck3 trick with the Switch to Position 1 and Position 2.

But now its ok.  Got a Good Dump  biggrin.gif   I'll flash and test , Thanks for the support  ^^


JOKEr
Logged

balli

  • Archived User
  • Newbie
  • *
  • Posts: 1
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #34 on: December 03, 2009, 03:54:00 PM »
Very nice, for a minute there, when i read 93450 on my new drive, i though i bought a really expensive DVD player..

has anyone made a complete tutorial with this step included ?

anyone awesome  biggrin.gif
Logged

Pepsi2007

  • Archived User
  • Jr. Member
  • *
  • Posts: 74
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #35 on: December 03, 2009, 07:56:00 PM »
i read all these things on dumping the fw off the 2 new drives but does the method work for the old 74 version?
Logged

JamesNY

  • Archived User
  • Jr. Member
  • *
  • Posts: 56
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #36 on: December 04, 2009, 03:06:00 AM »
could someone write tutorial step by step
in my opinion i need to connect those wires like on picture
but i dont know do i have to connect my serial probe
also i dont know what exactly write in dosflash

so someone please write this step by step

please
Logged

stacker69

  • Archived User
  • Full Member
  • *
  • Posts: 242
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #37 on: December 04, 2009, 03:13:00 AM »
QUOTE(Pepsi2007 @ Dec 4 2009, 01:56 PM) View Post

i read all these things on dumping the fw off the 2 new drives but does the method work for the old 74 version?


If they use the same chip then yes it will work on the 74XXXX drive.
Logged

JamesNY

  • Archived User
  • Jr. Member
  • *
  • Posts: 56
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #38 on: December 04, 2009, 08:19:00 AM »
how to put key into liteon 74...

can it be done with jungleflasher

or what to do with my key?
Logged

ken D.

  • Archived User
  • Newbie
  • *
  • Posts: 26
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #39 on: December 04, 2009, 02:36:00 PM »
Can anybody provide a step by step guide on how to do this in detail, especially for us noobs,and rookies?

This post has been edited by ken D.: Dec 4 2009, 10:37 PM
Logged

ruben182

  • Archived User
  • Newbie
  • *
  • Posts: 22
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #40 on: December 04, 2009, 04:36:00 PM »
*nevermind* (may be deleted)

This post has been edited by ruben182: Dec 5 2009, 12:42 AM
Logged

Pepsi2007

  • Archived User
  • Jr. Member
  • *
  • Posts: 74
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #41 on: December 04, 2009, 08:12:00 PM »
ty stacker :-)
Logged

andifx

  • Archived User
  • Newbie
  • *
  • Posts: 3
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #42 on: December 04, 2009, 11:06:00 PM »
i tried this method and its work great...
i've just flashed 5 xbox , but i found 1 xbox that i can't dump...
always give me x52 in dosflash...
i tried about 3 times for this one, check the soldering, cut the track again, but still can;t dump the key...
the chip board still using Mx, and its firmware same as 4 before ( 93450c-2 , labeled on the dvd rom board ), 1 before had 93450.
is there anyone have the same problem with me ?

thanks you
Logged

iateshaggy

  • Archived User
  • Hero Member
  • *
  • Posts: 906
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #43 on: December 04, 2009, 11:12:00 PM »
either something isn't making connections, or something is still connected.
Logged

green360

  • Archived User
  • Newbie
  • *
  • Posts: 36
iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
« Reply #44 on: December 05, 2009, 06:01:00 AM »
QUOTE(andifx @ Dec 5 2009, 07:06 AM) View Post

i tried this method and its work great...
i've just flashed 5 xbox , but i found 1 xbox that i can't dump...
always give me x52 in dosflash...
i tried about 3 times for this one, check the soldering, cut the track again, but still can;t dump the key...
the chip board still using Mx, and its firmware same as 4 before ( 93450c-2 , labeled on the dvd rom board ), 1 before had 93450.
is there anyone have the same problem with me ?

thanks you


hye I read that the solution to this drives wich still give a 52 statut is to use a smaller resistor like 20ohms or 18, 16 ohms & tray again
good luck
Logged
Pages: 1 2 [3] 4 5 ... 9
« previous next »