Topic: iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method (Read 1098 times)

Xbox-Scene · « **on:** December 01, 2009, 07:27:00 PM »

iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method
Posted by XanTium | December 1 21:27 EST | News Category: Xbox360

(IMG:http://www.burstnet.com/cgi-bin/ads/ad9520b.cgi/ns/v=2.1S/sz=300x250A/

carranzafp/Maximus released a modified version of the Lite-On iXtreme v1.6 to work with the 83850-v2 and 93450 drives:

Quote

Just finished hexediting and testing
Here are templates for Ixtreme 1.6 for 83V2 and 93450 liteon firmwares
what you need to do is place your keys/serials on it and flash
use Jungleflasher or Hexedit, whatever, keep you original stored for future upgrades

Dont ask why you got banned if you play Online with this firmware, its 1.6, also I just tested with 2 consoles so its your call
the fws are based on the 83v1 ixtreme 1.6 I could have do it based on the 74 but Its the first I saw, dont think based on the 74 would make them safer anyway

Download: n/a (might be illegal under DMCA/EUCD)
News-Source: carranzafp on XBH

In related news, MRA released a new and better method to dump/read those Lite-On 83850-v2 and 93450 drives:

Quote

No pin lifting or epoxy removing needed anymore! Just solder anything on the back according to this picture.
Also if you got status 0x52 instead of 0x72 with the "1,8V-method" this should do it. I already dumped 4 drives with this method without any issues.
(IMG:http://pictures.xbox-scene.com/xbox360/lite-on/loboard-400.jpg)

-switch in pos 1
-power drive
-start Dosflash --> SPI should get recognized with status 0x72
-put switch in pos 2
-click "read"

unsolder anything and reconnect the lines that have been cut.

News-Source: MRA on XBH

sami8519 · « **Reply #1 on:** December 01, 2009, 07:36:00 PM »

That's great advancement. Thanks for everybody involved.

Ranger72 · « **Reply #2 on:** December 01, 2009, 07:43:00 PM »

That makes things a little easier.

OliSykesIsPro · « **Reply #3 on:** December 01, 2009, 07:53:00 PM »

Me Likes.

GOTitCUZiMODDED · « **Reply #4 on:** December 01, 2009, 07:53:00 PM »

Tested out perfect on a Modern Warfare 2 Super Elite! Thanks for the better dumping method diagram. Not gonna go on XBL with this one yet until LT comes out. Good to know I have the original firmware to revert back to now. Will attempt multiple reflashes to test its reliability! Awesome work guys! Thanks for everything!

HyperUK · « **Reply #5 on:** December 01, 2009, 08:03:00 PM »

So am I right in thinking people have full dumps of the original LiteOn firmware now unlike before when you could only get dummys?

If so could people not post them and hex edit out their key so others could revert their flashed drives back to stock.

eyric101 · « **Reply #6 on:** December 01, 2009, 08:10:00 PM »

Sorry if this sounds noobish, but this diagram has you cutting two traces? I'm not sure that is better then a little epoxy removal and lifting a pin.

Ranger72 · « **Reply #7 on:** December 01, 2009, 08:33:00 PM »

QUOTE(HyperUK @ Dec 1 2009, 10:03 PM)

So am I right in thinking people have full dumps of the original LiteOn firmware now unlike before when you could only get dummys?

If so could people not post them and hex edit out their key so others could revert their flashed drives back to stock.

There is absolutely ZERO reason to flash back to stock. If the console has EVER had 1 backup loaded on the console the risk has already been put into play. Flashing back to stock will do NOTHING to prevent a ban if you have already been flagged for one (even if you haven't logged on Live lately)

Best bet is to stay off Live and wait until LT firmware comes out. It will not lesson your risk for a ban that you have already put yourself in but it is better than nothing.

I have already seen reports from people who have stayed off Live until recently and now flashed stock firmware back to their Liteons only to go on Live and get banned right away.

UnnA^ · « **Reply #8 on:** December 01, 2009, 08:45:00 PM »

That not the reason we want to go back to stock......I want to go and stay legit.

Ranger72 · « **Reply #9 on:** December 01, 2009, 08:53:00 PM »

QUOTE(UnnA^ @ Dec 1 2009, 10:45 PM)

That not the reason we want to go back to stock......I want to go and stay legit.

Then flash LT and never play a backup. LT will be almost full stock retail firmware.

m4sterchi3f · « **Reply #10 on:** December 01, 2009, 09:21:00 PM »

QUOTE(eyric101 @ Dec 1 2009, 10:10 PM)

Sorry if this sounds noobish, but this diagram has you cutting two traces? I'm not sure that is better then a little epoxy removal and lifting a pin.

Exactly what I was thinking when I read this. Not sure if this could be classified as better unless it is more reliable and/or easier. But then again, I don't have a 83V2 or 93450 drive to test out. Good work though on figuring this out.

Takashi · « **Reply #11 on:** December 01, 2009, 09:26:00 PM »

Works Beautifully!
THANK YOU!!!!!

UnnA^ · « **Reply #12 on:** December 01, 2009, 09:45:00 PM »

LT is not stock, i don't want any hint of a chance of being banned! Seeing as it's now possible it would be nice if the option was made available!

Takashi · « **Reply #13 on:** December 01, 2009, 10:12:00 PM »

Success on a 93850c, can't spoof a benq to that version yet tho

mksoftware · « **Reply #14 on:** December 01, 2009, 10:48:00 PM »

Quite interesting to see this flashing procedure, works fine here! Could be hard for the guys not wanting to solder though

Author Topic: iXtreme v1.6 for Liteon 83V2 and 93450 - Better Dumping Method (Read 1098 times)