Topic: Problem With Jungleflasher When Try Flash Benq Drive (Read 132 times)

yossiku · « **on:** October 13, 2009, 03:46:00 PM »

okay thats my story i bought an xbox360 a year ago 1.41 flashed
now i need update my iextreme to 1.51 and when i get in to the software (jungleflash 1.55, 1.66) my computer is stack and get back after reset..
help me please what i should do ?!
btw i have an intel dg33bu mainboard and p35/g33/g31 chipset (from cpu-z) and benq drive
i found more something whitout portoi32 th software work fine but didnt detect the xbox drive..
more little something im was using xp sp3 and the software didnt work now im use windows 7 and steal same problem....
help me please my xbox is apart in my room and i didnt want some little screw or something like that go to hell thanks,
yossiku.

iglitare · « **Reply #1 on:** October 14, 2009, 07:42:00 AM »

QUOTE(yossiku @ Oct 13 2009, 11:46 PM)

...
help me please what i should do ?!
...

read tutorials
read threads

yossiku · « **Reply #2 on:** October 14, 2009, 02:22:00 PM »

QUOTE(iglitare @ Oct 14 2009, 02:42 PM)

read tutorials
read threads

areally read turitorials but no one talking about my problem..

yossiku · « **Reply #3 on:** October 15, 2009, 05:41:00 AM »

someone ?

iglitare · « **Reply #4 on:** October 15, 2009, 09:32:00 AM »

buy a via6421 sata controller

yossiku · « **Reply #5 on:** October 15, 2009, 11:57:00 AM »

QUOTE(iglitare @ Oct 15 2009, 04:32 PM)

buy a via6421 sata controller

but what it is good for ? i areally got 4 sata slots in my mainboard

Jbasto · « **Reply #6 on:** October 15, 2009, 12:19:00 PM »

QUOTE(iglitare @ Oct 15 2009, 11:32 AM)

buy a via6421 sata controller

BAAAA WRONG !!!!

What is the problem we need more info.

Screens If possible

QUOTE(yossiku @ Oct 15 2009, 01:57 PM)

but what it is good for ? i areally got 4 sata slots in my mainboard

Use the one that is the nearest to the front of the Pc that is the Main Sata Port

* Look says Sata1 hxxp://cache-www.intel.com/cd/00/00/36/20/362044_362044.jpg

This post has been edited by Jbasto: Oct 15 2009, 07:23 PM

yossiku · « **Reply #7 on:** October 16, 2009, 05:03:00 AM »

QUOTE(Jbasto @ Oct 15 2009, 07:19 PM)

BAAAA WRONG !!!!

What is the problem we need more info.

Screens If possible
Use the one that is the nearest to the front of the Pc that is the Main Sata Port

* Look says Sata1 hxxp://cache-www.intel.com/cd/00/00/36/20/362044_362044.jpg

i try evry slot thats can be...
more something if the xbox didnt connect to the pc when i run jf its freeze also and im try to format my pc to windows 7 and steal actually same prob with portio32 freeze without go fine but not recognize the xbox..
more something i try to open jf and connect the xbox (without portio32) of course the pc didnt recognize my xbox but i try install the driver when the jf is open and the pc stuck too..
can it be problem with my main board ? there is another software that i can try to use ? or another driver ?

Jbasto · « **Reply #8 on:** October 16, 2009, 06:14:00 AM »

QUOTE(BoNg420 @ Jan 14 2009, 01:15 PM)

Note:

Also for those who are having problems with PC freezing. Make sure your Windows is up to date. Make sure you have the latest drivers for your chipset. For example I was having problems with my onboard nforce 650i sli. I went to nvidia.com and downloaded the latest drives for the 650i sli, installed them, then installed portio32.exe and restarted. Now my PC doesnt freeze anymore when erasing a liteon and power cycling in windows. If you don't have nforce, you will have to figure out where to get your drivers from.

Here is the link

http://downloadcenter.intel.com/SearchResu...op+Board+DG33BU

Chipset
http://downloadcenter.intel.com/Detail_Des...80&lang=eng

This post has been edited by Jbasto: Oct 16 2009, 01:18 PM

iglitare · « **Reply #9 on:** October 16, 2009, 07:48:00 AM »

i´ve flashed hundreds of drives with my via6421 controller.
Just dont install drivers, only install PortIO
Works fine with EVERY drive.

Perhaps there are other solutions. But there are so many onboard controller out there...
Off course you should install the neweste drivers for all your PC-Components.

But if everything fails, buy this controller-card for about 20$ and you should be fine.

(BTW i am in no way a employee of VIA, trying to do some advertising here

)

d53642 · « **Reply #10 on:** October 16, 2009, 08:00:00 AM »

Best bet would be to get the 6421.

I used to use my ASUS onboard Southbridge Chipset which allows me to flash any drive in windows except when I have to use dos to extract the keys from M28, and Hitatchi. I bought the 6421 just recently so I could do all drives, and trust me it saves a lot of headaches with the via card cause you know its going to do any drives out so far.

Jbasto · « **Reply #11 on:** October 16, 2009, 08:19:00 AM »

QUOTE(iglitare @ Oct 16 2009, 09:48 AM)

i´ve flashed hundreds of drives with my via6421 controller.
Just dont install drivers, only install PortIO
Works fine with EVERY drive.

Perhaps there are other solutions. But there are so many onboard controller out there...
Off course you should install the neweste drivers for all your PC-Components.

But if everything fails, buy this controller-card for about 20$ and you should be fine.

(BTW i am in no way a employee of VIA, trying to do some advertising here (IMG:style_emoticons/default/biggrin.gif) )

Well yeah that would be the last thing is there to do.
Here is the link:
Via Card

yossiku · « **Reply #12 on:** October 17, 2009, 02:14:00 AM »

QUOTE(Jbasto @ Oct 16 2009, 03:19 PM)

Well yeah that would be the last thing is there to do.
Here is the link:
Via Card

last question (IMG:style_emoticons/default/smile.gif)
my friend got a new computer (few days ago) but he gots vista 64bit there is portio for 64 bit ?

strike13 · « **Reply #13 on:** October 17, 2009, 02:22:00 AM »

QUOTE(yossiku @ Oct 17 2009, 09:14 AM)

last question (IMG:style_emoticons/default/smile.gif)
my friend got a new computer (few days ago) but he gots vista 64bit there is portio for 64 bit ?

Dont think JF can work on 64 bit - May Be Wrong

Jbasto · « **Reply #14 on:** October 17, 2009, 08:54:00 AM »

QUOTE(yossiku @ Oct 17 2009, 04:14 AM)

last question (IMG:style_emoticons/default/smile.gif)
my friend got a new computer (few days ago) but he gots vista 64bit there is portio for 64 bit ?

Port will only work with 32bit OS

Just do a Partition and install XP in it (dual Boot)

Author Topic: Problem With Jungleflasher When Try Flash Benq Drive (Read 132 times)