QUOTE(brando56894 @ Dec 20 2009, 01:30 PM)
When you were talking about USB headers, USB ports and detachable wires im assuming the detachable
wires would be from the Xbox motherboard to the PCB of the NAND reader and the usb port would be
from the PCB to your computer? Thats the way I'd like to have mine setup if thats not how it already
is.
-- SNIP --
Also when were you going to start selling these? I was planning on starting my attempt at the JTAG
hack in about a week and would like to use your method instead of the LPT port.
Yes, the wires will be detachable. The header Im using now, I only picked because I didnt
leave enough room between the labels and the connector. In the latest revision Ive made a bit more
room, so a connector with removeable wires can (and will) be used. The group buy is currently set to
finish on Xmas day (when I return from Colorado) so figure a week for parts to arrive and for
everything to be assembled. My goal is to have everything built and ready to be shipped on the first
full week of the new year.
QUOTE(rsd @ Dec 20 2009, 04:02 PM)
I'd be interested in a DIY kit if shipping was reasonable within Canada.
Shipping within Canada will be very reasonable, as its going to (hopefully) be shipped as
lettermail, in a bubble mailer. This should keep shipping hopefully around the $5 mark.
Just a few questions:
-Is the 7pin header going to the 360 detachable?
It will be, yes-What about a small dipswitch for the bootloader mode jumper?
I used a header because I had read that the connection would eventually be used for serial
communication. This way, a wire or a header could be attached to the male connectors. Plus, a header
keeps cost down wink.gif-Why not use a 12mhz crystal? I read a little of the thread on XBH before it went down and it seemed
like people were having trouble with the resonaters dumping 256/512 jaspers but once they tried a
crystal it worked fine.
Hmm, interesting point. Resonators are less accurate than crystals, so that would be the reason why
a crystal worked when a reso didnt. Im glad you mentioned this - I think I will switch to a crystal
instead of a resonator, just incase!-Would you mind if some people wanted different components? Maybe someone ones a USB B connector
instead of a 4pin header.
Absolutely not. I was planning on using a USB-B connector anyways, as thats what the majority of the
people interested want I was planning on purchasing the components from http://www.dipmicro.com/store/ . Think hes based out of ontario and buys bulk from digikey/newark. Maybe you can get some stuff cheap from there. Once the GB is finished, all the parts will be ordered in bulk from somewhere like DigiKey or Mouser, to avoid the middleman (like dipmicro) and to keep costs downI answered your questions in the quote.
QUOTE
count me in for a full one how do i join the list??
I added you to the list
QUOTE(ddxcb @ Dec 20 2009, 08:35 PM)
Hey how much would it cost for a full one or just a kit thanks and put me on the list as well
Im aiming for $25 plus shipping, and hoping for no more than $30 plus shipping. Thats in Canadian, by the way, so all of you whose currency is better than ours, it will be slightly cheaper for you
QUOTE(s1lv1a9999 @ Dec 20 2009, 11:41 PM)
Please add me to the list too thanks. I will get pre-assembled, unless getting the kit version will mean I get it faster, then I will go that way. Cheers. What is the ETA on when these will be available to be posted? Also, I am in Australia but don't mind paying postage.
The way things are looking right now, whether it is as a kit, or is assembled, it will take approximately the same amount of time. If I am swamped, then I will make yours a kit, otherwise, expect a fully assembled, fully tested flasher
Im hoping to have them all assembled, built, and ready to be shipped the first full week of January (the week of the 4th, I think).
QUOTE(rastaman108037 @ Dec 21 2009, 12:03 AM)
I'd be interested depending on the price. As long as it's not more than 40$
Answered this question two quotes up
--
Updated list:
1. kacroet (X-S)
2. kanknast (X-S)
3. geep6 (X-S) - Kit
4. DeathGrind (X-S)
5. firebuddie (X-S)
6. iacon22 (X-S)
7. ericvct (X-S)
8. bobasp1 (X-S)
9. techman36 (X-S)
10. dokworm (X-S)
11. hcaa (X-S)
12. brando56894 (X-S)
13. rsd (X-S) - kit
14. NADGG106 (X-S)
15. ddxcb (X-S)
16. Perplexer (X-S)
17. harleywastaken (X-S)
18. moreniu (X-S)
19. Greenvalor7 (X-S)
20. s1lv1a9999 (X-S) - kit if assembly will take awhile
21. rastaman108037 (X-S)
