Topic: Error 16 (Read 115 times)

spmatrix · « **on:** March 02, 2013, 02:53:00 AM »

I have a moded XBOX with error 16
I've read everything you say about the error 16

unfortunately I have a problem.

I have no backup from xbox

I do not have someone close who has xbox

and I can not flash the bios

Please for some help, thanks.

Heimdall · « **Reply #1 on:** March 02, 2013, 05:11:00 AM »

How is your Xbox modded - softmod or chip?

What did you to to make the Xbox have error 16?

spmatrix · « **Reply #2 on:** March 02, 2013, 08:56:00 AM »

QUOTE(Heimdall @ Mar 2 2013, 02:11 PM)

How is your Xbox modded - softmod or chip?

What did you to to make the Xbox have error 16?

Has mod chip

I do not know what exactly.

What did Ι do to have error 16?
Well...

My child while playing with his cousin, pulled the controls and xbox fell.
When they put in place was not working, and showed error 16.
(It fell from a great height)

I know, the hard disk may be spoiled, but can display other errors.

Heimdall · « **Reply #3 on:** March 02, 2013, 12:08:00 PM »

Is the chip still working and loading the hacked BIOS, or are you now booting the original BIOS?

Have you checked that the chip is still attached to the motherboard, and that the D0 wire is still attached to the motherboard and the chip?

spmatrix · « **Reply #4 on:** March 02, 2013, 12:47:00 PM »

All are in place.

As for the boot, begins normally by showing the logo of xbox and then displays the error.

Heimdall · « **Reply #5 on:** March 02, 2013, 01:49:00 PM »

"Boots normally"....

Do you mean that it boots like an unmodded Xbox, or it boots like it did before it was dropped? Most modded BIOSes look different when they boot - different colours, a logo, different text.

Can you boot with HeXEn or Frosty's Rescue Disc?

Is the disk locked?

Which chip do you have?

This post has been edited by Heimdall: Mar 2 2013, 09:53 PM

spmatrix · « **Reply #6 on:** March 02, 2013, 03:07:00 PM »

I do not know.
When I bought the xbox I tried it. After the chip I tried it again.
It was the same in both boot times, and the logo.
After I installed evox. I do not remember which version.

I do not know what is HeXEn or Frosty's Rescue Disc.
But I tried to test this:
http://www.youtube.com/watch?v=07MSbQPYhFc
without result.

I do not remember if the hard disk is locked or unlocked and in this situation I can not check out because I do not have access.

Heimdall · « **Reply #7 on:** March 02, 2013, 03:50:00 PM »

What does your chip look like? Does it have a switch on it, can you post a picture?

If it has a switch, what happens if you switch it?

This post has been edited by Heimdall: Mar 3 2013, 12:06 AM

spmatrix · « **Reply #8 on:** March 03, 2013, 12:10:00 AM »

I was one of the first since the xbox came out and created the first (or second) chip.

I do not know how it looks this chip, so I can not know if it has a switch or not.

I will try to make a photo.

Heimdall · « **Reply #9 on:** March 03, 2013, 06:24:00 AM »

Hold on. In an earlier reply you said you had checked the chip and the D0 wire, and

QUOTE

All are in place

Now you are saying that you don't know what the chip looks like.

Those two statements can't be simultaneously true....

This post has been edited by Heimdall: Mar 3 2013, 02:32 PM

spmatrix · « **Reply #10 on:** March 03, 2013, 11:07:00 AM »

Yes, with one look that I threw everything was in place, but that does not mean that I have knowledge and I know from chip. So I can not recognize the mod chip they put me.

Can you help me or not ?

Heimdall · « **Reply #11 on:** March 03, 2013, 11:16:00 AM »

I'm not expecting you to have knowledge of the chip, I'm expecting you to either a. remember if it had a switch on the PCB, or b. open the Xbox again and have a look, and either provide a photograph or describe what it looks like.

This post has been edited by Heimdall: Mar 3 2013, 07:17 PM

spmatrix · « **Reply #12 on:** March 03, 2013, 11:35:00 AM »

(IMG:http://i280.photobucket.com/albums/kk196/spmatrix/IMG_1186_zpsfa576be5.jpg)

(IMG:http://i280.photobucket.com/albums/kk196/spmatrix/IMG_1185_zps91538fb1.jpg)

(IMG:http://i280.photobucket.com/albums/kk196/spmatrix/IMG_1184_zpse6d6ed5f.jpg)

(IMG:http://i280.photobucket.com/albums/kk196/spmatrix/IMG_1183_zpsed969320.jpg)

Heimdall · « **Reply #13 on:** March 03, 2013, 11:48:00 AM »

I meant photos of the chip and the immediate area around it, not repeated photographs of the whole Xbox.....

There is no evidence of a switch, so that option is out of the question.

Have you got hold of Frosty's or HeXEn yet, and burned them to DVD-R, and tried to boot with them?

Have you built an xboxhdm CD to rebuild the hard drive (like the one in the Youtube video you linked to)?

Also, do you have a spare IDE hard drive?

spmatrix · « **Reply #14 on:** March 03, 2013, 12:03:00 PM »

My friend, I told you that I do not know what is Frosty's or HeXEn and what they are doing and I can not find them.
Explain to me.

I downloaded the recovery disc and tried as I said and as shown in the video but with no result.
I can not proceed. While recognizing the hard disk when I press the first option, I get an error message, like there's no hard drive.

Third, I do not have extra hard drive.
I can buy one, but the size is large, around 160gb

Author Topic: Error 16 (Read 115 times)