Topic: Xbox V1.1 Us Power Supply - Can I Use A Us Psu With My Pal Xbox? (Read 80 times)

AZImmortal · « **on:** March 13, 2012, 01:25:00 PM »

As far as I know, there are no regional differences with the power supplies. You just have to make sure that it's the right version.

MrMajst3r · « **Reply #1 on:** March 13, 2012, 01:42:00 PM »

I suggest to look at molex (HDD) connector, probably it's broken. You can replace it with another one from on example old computer's PSU.

Leprekaun · « **Reply #2 on:** March 13, 2012, 02:37:00 PM »

Thanks guys. I would get a molex connector if I could (would rather avoid taking it from a PSU due to potential electric shock) but after I took out the PSU board, I found that the HDD molex connector seems to be soldered to the board. I don't have any experience in soldering so that is why I felt like avoiding getting a cable. I may still consider doing that though as I know someone (electrical/computer engineer) who is very familiar with soldering to do it, unless I'm missing something and the power connector can be taken off the board without soldering?

Leprekaun · « **Reply #3 on:** March 14, 2012, 03:59:00 AM »

Ok, I got a message back from Llamma.com about the US PSU. The guy there said that it is compatible with my motherboard so it should work but he also said that PAL region xboxes typically use 220v, not 110v so would this PSU still work or would I risk damaging my xbox if I used a lower voltage PSU? Thanks.

Author Topic: Xbox V1.1 Us Power Supply - Can I Use A Us Psu With My Pal Xbox? (Read 80 times)