Print

[bdogpot]

Fist off I have a v1.0 xbox original.
When you open he case and take the mobo out there are about 5 or 6 points on the bottom that are all connected to ground via the cage.
I am putting the mobo into a silverstone media center case.
It came with a psu in it and screwed into the front, so the gnd sigal is transfered through out the case.
Is it ok to connect the ground points on the bottom of the mobo with the psu ground sinal through out the case.
The reason why I ask this is because i am going to screw different mobo standoffs into the case so that way I can screw it down. If I do that the gnd sinal will share between the two.