Topic: Dash Launch v2.20 (Read 738 times)

ars0n · « **Reply #30 on:** April 07, 2011, 10:03:00 PM »

Ok, so I thought that there was no point in updating to 12625 because of this dashlaunch update. So why are people even bothering? There is nothing to the 12625 update, I thought it just implemented more anti hacking junk?

krizalid · « **Reply #31 on:** April 07, 2011, 10:17:00 PM »

QUOTE(tk_saturn @ Apr 7 2011, 05:30 PM)

I've a couple of consoles all of which have hacked SMC's generated by blackaddr's tool, and have been so for several months. So far none have had any issues with DL and those SMCs. Out of curiousiy I updated my Jasper 512MB to 12625, and after running the DL installer several times the console is still booting. If it were to bugger any console up, i'd imagine it would be a BB Jasper.

I'd query if you're using blackaddr's tool correctly, as for a start you're using the wrong version. You also mention using smc_io, which means you haven't read smc_util's readme.

Yes, those are the SMCs I've been using for quite some time and now again.

The issue is with the SMCs hacked with smc_util v1.1 that are created.

Aldanga · « **Reply #32 on:** April 07, 2011, 10:58:00 PM »

QUOTE(soulwarrior @ Apr 7 2011, 08:42 PM)

I think Aldanga is right. I couldn't get the update to work either, but as soon as i deleted launch and ihelper from the flash using fsd, the update went through. Then i just reinstalled dashlaunch afterwards.

I just tested this and can corroborate the results. Without Dash Launch, the update is recognized. Once Dash Launch is installed, regardless of settings in launch.ini, it doesn't accept the update. Once Dash Launch is removed, it recognizes the update again. Renaming the update folder doesn't make a difference.

I don't know if this is limited to 12611 or is across the board, but it appears to be a bug.

cory1492 · « **Reply #33 on:** April 08, 2011, 02:40:00 AM »

QUOTE(Aldanga @ Apr 7 2011, 09:58 PM)

I don't know if this is limited to 12611 or is across the board, but it appears to be a bug.

The deal is, the blocker is working far too well

SilentBob1638 · « **Reply #34 on:** April 08, 2011, 04:21:00 AM »

QUOTE(soulwarrior @ Apr 8 2011, 02:42 AM)

but as soon as i deleted launch and ihelper from the flash using fsd, the update went through. Then i just reinstalled dashlaunch afterwards.

On #freeboot i was told yesterday that manually editing/writing the flash will corrupt it. It should be reflashed completely instead. Not sure if this is correct.

soulwarrior · « **Reply #35 on:** April 08, 2011, 06:09:00 AM »

QUOTE(SilentBob1638 @ Apr 8 2011, 06:21 AM)

On #freeboot i was told yesterday that manually editing/writing the flash will corrupt it. It should be reflashed completely instead. Not sure if this is correct.

That's what I did actually. My exact steps were:
1. Build 12625 image with fbbuild (first I manually extracted the resources from the dash launch default.xex and transferred the patches to the correct places) .

2. flashed image.

3. realized the official 12625 update would not install no matter what settings I had in the ini or what i named the update folder.

4. Thought to myself, maybe something is wrong with dash launch, so i deleted the ihelper/launch files from the flash using fsd.

5. Ran the update successfully.

6. reflashed the original image from step 1.

iwanttheagrocrag · « **Reply #36 on:** April 08, 2011, 01:09:00 PM »

QUOTE(tk_saturn @ Apr 6 2011, 11:27 PM)

FSD2 retrieves screenshots and game covers from catalog.xboxlive.com [65.55.42.202]. All you have to is block all of Microsoft's IP range (65.54.0.1-65.55.255.255) in your routers firewall and then add an exception for that single address.

It's what i've done for ages.

Would prefer the files to be seperate rather than embeded in a default.xex, I prefer to build FreeBoot images with DashLaunch in from the start.

Some people have shitty routers, or just can't get it to block at all. So people like me with a router that I payed $150 and ended up with a completely crappy user interface but the router itself is great. My router just doesn't let me adjust what is needed to completely block live access. I am very thankful for the option to block LIVE without beating my router till my fists are bloody.

Also I Jtag peoples 360's so for me its another great option to be able to enable so I won't have people getting banned then asking me what happened, because they apparently didn't hear me the 10 times I told them not to try to sign into LIVE.

tk_saturn · « **Reply #37 on:** April 08, 2011, 03:35:00 PM »

Doesn't work for me either. But it's still working on fbBuild v0.20 12611 + DL v2.20, so drop back to that as it doesn't make much difference.

Glottiz · « **Reply #38 on:** April 08, 2011, 04:00:00 PM »

Yet another amazingly fast update from c0z, thanks.

tk_saturn · « **Reply #39 on:** April 08, 2011, 04:26:00 PM »

It doesn't work on ME2 Cory, haven't tried any others. Gives me 3x "

Fatal Exception Intercepted" and then dumps back to the default item in launch.ini. V1 still works fine with ME2 though.

Jordan23 · « **Reply #40 on:** April 08, 2011, 04:34:00 PM »

Ok, so I've never really messed with FSD or dashlaunch before, but my newer games won't play now so I got this to fix the problem. The problem is I can't get it to work, everything still gives me a dirty disc error. Can't figure out why, any help?

tk_saturn · « **Reply #41 on:** April 08, 2011, 05:44:00 PM »

CODE

------------------------------------------------------------------------
TIME: 22:41:55 GMT Fri, Apr 8, 2011
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
    FullName       : \Device\Package_823D69EBB93C03AECDF9EB80509FF0ED\default.xex
    BaseName       : default.xex
    PEName         : BioGame-XeReleaseLTCG.exe
    ImageBase      : 82000000
    SizeOfFullImage: 01530000
    EntryPoint     : 82C4BF30
------------------------------------------------------------------------
    EADDR: 0x82D65B68
    ECODE: 0xC0000005
    EFLAG: 0 (cont)
    NPARM: 2
         PARAM 00: 0x00000001
         PARAM 01: 0x78AA0000
    CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
    MSR: 0x0200B030 IAR: 0x82D65B68
    LR : 0x8279AEA8 CTR: 0x000000000000019A
------------------------------------------------------------------------
Integer Registers:
    CR : 0x42000444 XER: 0x20000000
    r0 : 0x0000000000001000 r1 : 0x0000000070227500 r2 : 0x0000000000000000
    r3 : 0x0000000078A919A0 r4 : 0x0000000000000000 r5 : 0x0000000000010000
    r6 : 0x0000000078AA0000 r7 : 0x00020000001A0100 r8 : 0xFFFFFFFFFFFFFFFF
    r9 : 0x0000000000000308 r10: 0x0000000000000010 r11: 0x0000000030012BC0
    r12: 0x000000008279B040 r13: 0x0000000080180000 r14: 0x000000007022A020
    r15: 0x0000000000000002 r16: 0x0000000000000001 r17: 0x0000000270227F60
    r18: 0xFFFFFFFF833D0000 r19: 0x000000006F6E4D00 r20: 0x000000006CD7F004
    r21: 0xFFFFFFFF83384660 r22: 0x0000000270227710 r23: 0x000000006DCE0000
    r24: 0x0000000000000022 r25: 0xFFFFFFFF833D0000 r26: 0x0000000000000294
    r27: 0xFFFFFFFF83400000 r28: 0x000000002EA10000 r29: 0xFFFFFFFF83400000
    r30: 0xFFFFFFFF83400000 r31: 0x0000000078A919A0
------------------------------------------------------------------------
Call Stack:
    0x82D65B68 (EADDR)
    0x8279AEA8 (LR)
    0x8279B040
    0x8279B1E8
    0x828588E0
    0x828530A0
    0x8285DC08
    0x82781B08
    0x8276F4A4
    0x8276F30C
    0x827820C4
    0x82781F08
    0x8276F4A4
    0x8276F30C
    0x827820C4
    0x827823B0
    0x8273A52C
    0x8273B130
    0x82B76008
    0x82B413C0
    0x82B65A88
    0x82B74134
    0x82B413C0
    0x82B40174
    0x82B3F738
    0x82B65B84
    0x82B7423C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
------------------------------------------------------------------------
TIME: 22:41:55 GMT Fri, Apr 8, 2011
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
    FullName       : \Device\Package_823D69EBB93C03AECDF9EB80509FF0ED\default.xex
    BaseName       : default.xex
    PEName         : BioGame-XeReleaseLTCG.exe
    ImageBase      : 82000000
    SizeOfFullImage: 01530000
    EntryPoint     : 82C4BF30
------------------------------------------------------------------------
    EADDR: 0x82D65B6C
    ECODE: 0xC0000005
    EFLAG: 0 (cont)
    NPARM: 2
         PARAM 00: 0x00000001
         PARAM 01: 0x78AA0004
    CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
    MSR: 0x00009030 IAR: 0x82D65B6C
    LR : 0x8279AEA8 CTR: 0x000000000000019A
------------------------------------------------------------------------
Integer Registers:
    CR : 0x42000444 XER: 0x20000000
    r0 : 0x0000000000001000 r1 : 0x0000000070227500 r2 : 0x0000000000000000
    r3 : 0x0000000078A919A0 r4 : 0x0000000000000000 r5 : 0x0000000000010000
    r6 : 0x0000000078AA0000 r7 : 0x00020000001A0100 r8 : 0xFFFFFFFFFFFFFFFF
    r9 : 0x0000000000000308 r10: 0x0000000000000010 r11: 0x0000000030012BC0
    r12: 0x000000008279B040 r13: 0x0000000080180000 r14: 0x000000007022A020
    r15: 0x0000000000000002 r16: 0x0000000000000001 r17: 0x0000000270227F60
    r18: 0xFFFFFFFF833D0000 r19: 0x000000006F6E4D00 r20: 0x000000006CD7F004
    r21: 0xFFFFFFFF83384660 r22: 0x0000000270227710 r23: 0x000000006DCE0000
    r24: 0x0000000000000022 r25: 0xFFFFFFFF833D0000 r26: 0x0000000000000294
    r27: 0xFFFFFFFF83400000 r28: 0x000000002EA10000 r29: 0xFFFFFFFF83400000
    r30: 0xFFFFFFFF83400000 r31: 0x0000000078A919A0
------------------------------------------------------------------------
Call Stack:
    0x82D65B6C (EADDR)
    0x8279AEA8 (LR)
    0x8279B040
    0x8279B1E8
    0x828588E0
    0x828530A0
    0x8285DC08
    0x82781B08
    0x8276F4A4
    0x8276F30C
    0x827820C4
    0x82781F08
    0x8276F4A4
    0x8276F30C
    0x827820C4
    0x827823B0
    0x8273A52C
    0x8273B130
    0x82B76008
    0x82B413C0
    0x82B65A88
    0x82B74134
    0x82B413C0
    0x82B40174
    0x82B3F738
    0x82B65B84
    0x82B7423C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------
------------------------------------------------------------------------
TIME: 22:41:56 GMT Fri, Apr 8, 2011
------------------------------------------------------------------------
Unhandled Exception (last chance):
The thread tried to read from or write to a virtual address for which
it does not have access.
------------------------------------------------------------------------
Faulting Module Info:
    FullName       : \Device\Package_823D69EBB93C03AECDF9EB80509FF0ED\default.xex
    BaseName       : default.xex
    PEName         : BioGame-XeReleaseLTCG.exe
    ImageBase      : 82000000
    SizeOfFullImage: 01530000
    EntryPoint     : 82C4BF30
------------------------------------------------------------------------
    EADDR: 0x82D65B70
    ECODE: 0xC0000005
    EFLAG: 0 (cont)
    NPARM: 2
         PARAM 00: 0x00000001
         PARAM 01: 0x78AA0008
    CFLAG: 0x00000017
------------------------------------------------------------------------
Control Registers:
    MSR: 0x00009030 IAR: 0x82D65B70
    LR : 0x8279AEA8 CTR: 0x000000000000019A
------------------------------------------------------------------------
Integer Registers:
    CR : 0x42000444 XER: 0x20000000
    r0 : 0x0000000000001000 r1 : 0x0000000070227500 r2 : 0x0000000000000000
    r3 : 0x0000000078A919A0 r4 : 0x0000000000000000 r5 : 0x0000000000010000
    r6 : 0x0000000078AA0000 r7 : 0x00020000001A0100 r8 : 0xFFFFFFFFFFFFFFFF
    r9 : 0x0000000000000308 r10: 0x0000000000000010 r11: 0x0000000030012BC0
    r12: 0x000000008279B040 r13: 0x0000000080180000 r14: 0x000000007022A020
    r15: 0x0000000000000002 r16: 0x0000000000000001 r17: 0x0000000270227F60
    r18: 0xFFFFFFFF833D0000 r19: 0x000000006F6E4D00 r20: 0x000000006CD7F004
    r21: 0xFFFFFFFF83384660 r22: 0x0000000270227710 r23: 0x000000006DCE0000
    r24: 0x0000000000000022 r25: 0xFFFFFFFF833D0000 r26: 0x0000000000000294
    r27: 0xFFFFFFFF83400000 r28: 0x000000002EA10000 r29: 0xFFFFFFFF83400000
    r30: 0xFFFFFFFF83400000 r31: 0x0000000078A919A0
------------------------------------------------------------------------
Call Stack:
    0x82D65B70 (EADDR)
    0x8279AEA8 (LR)
    0x8279B040
    0x8279B1E8
    0x828588E0
    0x828530A0
    0x8285DC08
    0x82781B08
    0x8276F4A4
    0x8276F30C
    0x827820C4
    0x82781F08
    0x8276F4A4
    0x8276F30C
    0x827820C4
    0x827823B0
    0x8273A52C
    0x8273B130
    0x82B76008
    0x82B413C0
    0x82B65A88
    0x82B74134
    0x82B413C0
    0x82B40174
    0x82B3F738
    0x82B65B84
    0x82B7423C
------------------------------------------------------------------------
Dump Done
------------------------------------------------------------------------

Author Topic: Dash Launch v2.20 (Read 738 times)