Print

[jayboy86]

any decent guides around as i would love to auto boot fsd2. im running freeboot 0.032 9199

thx

[juggahax0r]

QUOTE(jayboy86 @ Aug 10 2010, 11:48 AM)

any decent guides around as i would love to auto boot fsd2. im running freeboot 0.032 9199

thx

 The readme included and the sample launch.ini should be as good a guide as you really need...maybe someone will make an editing tool for noobs but it's pretty easy to follow the sample they give you..use flash installer to get the files on your nand , get the launch.ini ready put it in the folder with the flashinstaller xex and it will flash them to the nand for you. the main thing you need to worry about is the syntax of the paths one mistake and it will fail to do what you want it to do. I fought for an hour with a launch.ini only to find out i had made a grammatical error in the path listing. Once i fixed it everything was good.

[sm32]

so i'm having a really weird problem with my dash launch.

it always launches FSD when first turned on, but most of the time whenever i hit ( X ) and go to dashboard, it loads NXE.

this only happens on one of my hard drives (750gb) and not the other (640gb). To check if it was the hard drive that may be failing or something of the sort, i copied FSD to USB0:\ and the same issues arose as with the 750gb drive DL alone (though I did have the 750g hdd still plugged into HDD port).

any ideas what might be causing it to work on first boot but not subsequent dash requests?

if it is any consolation i added a lot of avatar DLC today; i was also playing around with trying to get saves transferred from an older xenon box (most of them worked, some didnt--like forza3).

thanks

[sm32]

i've noticed that if i hold LBump then XexMenu 1.1 loads every single time, but if i just wait for FSD2a to run then it mostly goes to NXE (again, the first boot up always takes me to FSD2a at least).

not sure what the deal is at all!

[Vel]

Hi All,

I'm having a few problems getting this working.

These are the steps I've followed:

1. Using FreeBOOT Toolbox Maker v2.4 I created a new FreeBOOT image using my original NAND image and CPU key. I had to choose the NAND option as after selecting HDD my 360 boots with a green light on the console and produces no display on my TV.

2. Created launch.ini file saved in UTF-8 format which reads as follows:

[QuickLaunchButtons]
Default = LHdd:\FreeStyle\FreestyleDash.xex
BUT_Y = LHdd:\FreeStyle\FreestyleDash.xex

3. Added newly created launch.ini file to the flash_installer folder and copied the folder to the root of my internal HDD (so I can find it).

4. Located flash_installer folder on the xbox and ran the default.xex which is stored inside.

5. Pressed A to flash the files my NAND.

6. Pressed Y to Exit.

7. Console boots back to NXE, turned Xbox off and back on and still booted back into NXE.

8. Tried adding a copy of the launch.ini to root of my HDD, MU and HDDX (no success, having the .ini file in any of the locations individually or together)

9. Tried adding launch.xex to the above locations as well, but still no success, my Xbox keeps booting to the NXE dash.

I am using a 512MB Jasper, does anyone have any idea what my issue could be, I've read through all the posts in this forum, but none of the suggestions have helped.

Also please note my Freestyle folder does have a capital S when it's in the root of my HDD,

Thanks,

Vel

EDIT: Turns out for some reason my FreestyleDash.xex was actually spelt FreesyleDash.xex all sorted now

[Vash3k]

I'm having problems with my Jasper 512 as well. Every time I try to flash with the latest Dashlaunch update, I get a box that boots with all green lights and no display. It's odd. Vel, you said selecting the NAND option fixed that issue for you? Which version of Toolbox 2.4 are you using? It doesn't appear to be an option in rev 3.

[Aldanga]

That option was removed in rev 3 because it was deemed unnecessary. I believe rev 2 has it.

[th0r615]

CODE

[QuickLaunchButtons]
BUT_A =
BUT_B = LHdd:\FreeStyle\default.xex
BUT_X =
BUT_Y =
Start =
Back  =
LBump =

Default =LHdd:\FreeStyle\default.xex

and Yes its  saved as UTF-8 and its also located at the root of my Hdd1.

I just dont understand. dashlaunch 0.2 works.

*EDIT* also wanted to add that it is a falcon box, in case that helps.

[WarriorSan]

QUOTE

This patch is given as is and I am not responsible if anything happens.

Thanks to XeDev fot the kxam patch builder and included the demo patch which started this,
FBDev for the 30ms ping limit bypass that is included, and TheFallen93 for powerpc tips.

Update:
   Fixed a bug that caused the xbox 360 to crash upon loading an xbox 1 game

UnlicensedContentFix

[soulwarrior]

QUOTE(th0r615 @ Sep 1 2010, 11:35 PM)

[QuickLaunchButtons]
BUT_A =
BUT_B = LHdd:\FreeStyle\default.xex
BUT_X =
BUT_Y =
Start =
Back  =
LBump =
Default = LHdd:\FreeStyle\default.xex

1. You forgot the space in the default line between the = and LHdd:\
2. Copy it as you see it now
3. Save as asci not utf-8

[p4r0l3]

QUOTE(WarriorSan @ Sep 2 2010, 01:29 PM)

mojobojo released a fix for his Unlicensed Content Patch:

From the readme:
UnlicensedContentFix

What does this patch do exactly?

[p4r0l3]

Ah, thanks for the reply.