Topic: FreeStyle Dash 2010-03-07 (Read 968 times)

nakie ninja · « **Reply #60 on:** March 09, 2010, 01:12:00 AM »

most of those ppl use nxe2god (i recommend nxe2god 1.1, its not in the usual places so just google it)

elitemods · « **Reply #61 on:** March 09, 2010, 01:47:00 AM »

I dont know if its been mentioned yet but would it be possible to add support to freestyle to change the color of the leds in the ROL?

DaBuisneZ · « **Reply #62 on:** March 09, 2010, 02:16:00 AM »

FYI Gamefaqs is a great alternative for screens, boxart and info.

dufc1983 · « **Reply #63 on:** February 04, 2020, 02:32:00 AM »

leds colour change feature would be awesome, i don't see much need for adding xbox1 titles until we can actually boot them

This post has been edited by dufc1983: Today, 10:33 AM

kanknast · « **Reply #64 on:** March 09, 2010, 05:50:00 AM »

pretty sure the only two colors of led on an unmodified rf board are green and red.

Jbonzo · « **Reply #65 on:** March 09, 2010, 06:45:00 AM »

QUOTE(kanknast @ Mar 9 2010, 12:50 PM)

pretty sure the only two colors of led on an unmodified rf board are green and red.

You are forgetting Yellow

Midnight Tboy · « **Reply #66 on:** March 09, 2010, 08:32:00 AM »

can anyone answer me this?

I currently have 2 external hdds that hold my extracted discs. XBLA Games are held on the main 360 hdd.

Now I currently have it set up to display the artwork etc from the USB so the fsdata is on the USB Drive. That way it would obv be indexed for that drive specifically to show only what exists on that drive.

Now......2 things.

1. IF I was to have my fsdata held on the 360 itself......when the freestyle is launched....will it auto be set to only display those games that are currently available on the inserted hdd? Could this cause other problems, ie by screwing up the xml report for fsdindexer each time the hdd is changed?

2. Secondly, XBLA.....now in my other posts I made and released a full XBLA preview trailers collection. At the moment I have it running off one of the hdds, and obv there is no problems there as such. But ideally I dont want to have to dupicate those few gb of trailers for each hdd I have to use (and each as get a new game).......so I'm wondering....and depending on the answer to if #1 is not possible.....to have XBLA previews/info set to gather on the main 360 hdd, and the disc based titles info to run off the usb?

Ideally I'd rather have everything held on the main 360 hdd as there is plenty spare space for that freeing up the more useful usb space....but I can foresee problems after running index for usb drive 1, and then inserting usb drive 2 it overwriting the xml files meaning that everytime I swapped the drive I'd in effect have to run fsdindexer again and again?

dpr99 · « **Reply #67 on:** March 09, 2010, 08:32:00 AM »

found this on the google code changes page

"Add Led Changing Option. Solid Color(Red,Green,Orange) or by Temperature."

This post has been edited by dpr99: Mar 9 2010, 04:36 PM

Spaceone · « **Reply #68 on:** March 09, 2010, 09:18:00 AM »

New build FreeStyle Dash 1.10 RC1 Beta

http://www.megaupload.com/?d=PE5ZGJNE

tsn92488 · « **Reply #69 on:** March 09, 2010, 09:22:00 AM »

was just about to post that, yes there is an led changing option that will be made available in the next release. the above comment is correct in what it what it is and what it can do.

1.10 RC 1 Beta released on 3/9/2010. see above post or google project page for dl link

Spooning · « **Reply #70 on:** March 09, 2010, 04:11:00 PM »

QUOTE(Spooning @ Mar 9 2010, 05:26 AM)

Got a strange problem here!
Yesterday I played TrialsHD and PinballFX of the internal HDD (NXE) for a short time

Today I hooked up my external HDD and installed some Arcade games
under usb:\content...

Now,when I try to boot TrialsHD or PinballFX with FreestyleDash,they wont load and I
get kicked back into the NXE Dashboard :-(

Error Message: The game could not start.Please download the game again WTF?!

Ive tried almost everything now and dont get it why they refuse to boot...
XM360 works fine btw!

THANK YOU for doing this nice stuff peeps,keep it up

Fixed with the new FreestyleDash 1.10

minus5252 · « **Reply #71 on:** March 09, 2010, 06:56:00 PM »

Anyone else showing REALLY high temps in Fahrenheit? I'm showing like 180 degrees on several of the outputs...just wondering if others feel the temps may not be accurate...

Minus

d0pe · « **Reply #72 on:** March 10, 2010, 02:37:00 AM »

QUOTE(re.lax @ Mar 9 2010, 06:26 AM)

you need to use the skins that come with it then go to your game you want to move then click X and then Click Y.
also it would be nice it someone could add listing of xbox 1 games!!

This is probably a silly question but how do you install xbox1 games on the USB HDD?

kipper2k · « **Reply #73 on:** March 10, 2010, 05:19:00 AM »

QUOTE(Spooning @ Mar 10 2010, 12:11 AM)

Fixed with the new FreestyleDash 1.10

Does anyone have a tut for loading xbl games from usb, i am using the latest freestyle dash and i get error unable to load. when trying to load from usb:content/0000000000000000/insert game here. Freestyle sees the games, just cannot successfully load them.

thanks

Jbonzo · « **Reply #74 on:** March 10, 2010, 02:34:00 PM »

QUOTE(d0pe @ Mar 10 2010, 09:37 AM)

This is probably a silly question but how do you install xbox1 games on the USB HDD?

From a modified god container. You can find info about over at XBH

Author Topic: FreeStyle Dash 2010-03-07 (Read 968 times)