Topic: Dash Launch v0.01 (Read 1936 times)

pink1 · « **Reply #195 on:** March 04, 2010, 04:17:00 AM »

QUOTE(eyestelllies @ Mar 4 2010, 12:51 AM)

i dont think so is there anyway to do that now

read Installing XELLOUS and getting NAND BACKUP on this post

http://forums.xbox-s...howtopic=703757

eyestelllies · « **Reply #196 on:** March 04, 2010, 07:07:00 AM »

QUOTE(pink1 @ Mar 4 2010, 06:17 AM)

read Installing XELLOUS and getting NAND BACKUP on this post

http://forums.xbox-s...howtopic=703757

i have no soldering skills i sent this away to get it jtag'ed i already have the nand image though it was sent with the console after it was jtaged

soulwarrior · « **Reply #197 on:** March 04, 2010, 10:15:00 AM »

QUOTE(eyestelllies @ Mar 4 2010, 09:07 AM)

i have no soldering skills i sent this away to get it jtag'ed i already have the nand image though it was sent with the console after it was jtaged

You don't need to solder anything. Download xellous from xbins, rename xell-2f.bin to updxell.bin, copy updxell.bin to a usb stick, boot into xell with the usb stick attached and let it update. Once updated deleted updxell.bin from the usb and copy the new updpatch.bin to the usb stick. Boot into xellous (eject button) with the usb stick attached and let it update.

As taken from the xellous guide:USB Notes:
For best results of getting the usb device detected. Remove the power plug from the console
after running the MS dashboard. Then reinsert the power plug, insert usb device and then
boot into XeLLous.

eyestelllies · « **Reply #198 on:** March 04, 2010, 10:30:00 AM »

OK so i did that and now it doesnt even boot xell

soulwarrior · « **Reply #199 on:** March 04, 2010, 12:33:00 PM »

QUOTE(eyestelllies @ Mar 4 2010, 12:30 PM)

OK so i did that and now it doesnt even boot xell

Are you making sure to start your system with the eject button (and letting the tray open all the way) and were you using XBR3 or XBR1?

eyestelllies · « **Reply #200 on:** March 04, 2010, 01:29:00 PM »

QUOTE(soulwarrior @ Mar 4 2010, 02:33 PM)

Are you making sure to start your system with the eject button (and letting the tray open all the way) and were you using XBR3 or XBR1?

yes i am and i was told it was xbr3 but from the way its not booting now i starting to think otherwise

iglitare · « **Reply #201 on:** March 04, 2010, 03:55:00 PM »

if i flash updpatch.bin file with flash360 all works fine.
if i flash the same file with xellous i only get a black-screen...
how is this possible?

pink1 · « **Reply #202 on:** March 04, 2010, 04:11:00 PM »

QUOTE(eyestelllies @ Mar 4 2010, 08:07 AM)

i have no soldering skills i sent this away to get it jtag'ed i already have the nand image though it was sent with the console after it was jtaged

did thay leave any wires to solder to

eyestelllies · « **Reply #203 on:** March 04, 2010, 04:58:00 PM »

yeah there are definitely wires in there but i think they are just the jtag wires

pink1 · « **Reply #204 on:** March 04, 2010, 05:06:00 PM »

i leave all of them if you have more than just the 3 jtagt you can do it

nickcas · « **Reply #205 on:** March 04, 2010, 05:34:00 PM »

QUOTE(eyestelllies @ Mar 4 2010, 03:29 PM)

yes i am and i was told it was xbr3 but from the way its not booting now i starting to think otherwise

If you can still boot XELL, you don't need to install Xellous to recover XBR. If you still have the original XBR, you can download the Gentoo Live CD, boot it up, and follow this tutorial to flash XBR with lflash.c: http://ep-comps.com/...lflash_16mb.rtf

eyestelllies · « **Reply #206 on:** March 04, 2010, 10:12:00 PM »

yeah there is no xell booting now after the xellous update i cannot figure out why

soulwarrior · « **Reply #207 on:** March 04, 2010, 11:35:00 PM »

QUOTE(eyestelllies @ Mar 5 2010, 12:12 AM)

yeah there is no xell booting now after the xellous update i cannot figure out why

This is a shot in the dark but, your dvd drive is connected correct?

QUOTE(pink1 @ Mar 4 2010, 08:04 PM)

no XELL just black screen and green light

To quote Looouky from the xellous thread:

QUOTE(Looouky @ Mar 2 2010, 11:10 PM)

black screen with green usually means your jtag wires are incorrect connected. I told you this already, check your soldering. I have done 4 big blocks jasper using my tut, 2 256 and 2 512.

pink1 · « **Reply #208 on:** March 05, 2010, 12:41:00 AM »

QUOTE(eyestelllies @ Mar 4 2010, 11:12 PM)

yeah there is no xell booting now after the xellous update i cannot figure out why

i had the same had to reflash xell and xellous with lpt and xbr with Gentoo Live CD

eyestelllies · « **Reply #209 on:** March 05, 2010, 07:12:00 AM »

QUOTE(soulwarrior @ Mar 5 2010, 01:35 AM)

This is a shot in the dark but, your dvd drive is connected correct?
To quote Looouky from the xellous thread:

Thats an idea but the only thing is is that it was booting before the update after the update it wouldnt reboot

Author Topic: Dash Launch v0.01 (Read 1936 times)