Print

[iEzio]

How is it possible to alphabetically sort my GAMES (displayed, if I start XeXMenu)?

I just can see my folders alphabetically sorted, my GAMES just won't. They're sorted after date, that's sad.

What's the problem there?

[thezet]

QUOTE(Spaceone @ Jan 17 2010, 02:37 PM)

Good idea, i tried but via FTP nand files are read-only.

If I remember correctly, you have to login with flash/flash to be able to change the nand via ftp
login: flash
pass: flash

I tried it on mine and it is a valid login/pass config so I am confident that it will solve your read only problem...


The Zet

[yaazz]

I haven't read this thread at all, but I noticed today that copying DVDS does not work for me.

XENON system copying retail left 4 dead 2 disc to USB drive.

I created a left 4 dead 2 folder on my usb, then entered the directory and started the "COPY DVD" function. A menu comes up to confirm, I select ok, and then nothing happens, it just goes back to the USB directory.

I am able to copy individual files and folders just fine, but the copy dvd function does not work.

[akula169]

QUOTE(yaazz @ Jan 21 2010, 07:11 PM)

I haven't read this thread at all, but I noticed today that copying DVDS does not work for me.

XENON system copying retail left 4 dead 2 disc to USB drive.

I created a left 4 dead 2 folder on my usb, then entered the directory and started the "COPY DVD" function. A menu comes up to confirm, I select ok, and then nothing happens, it just goes back to the USB directory.

I am able to copy individual files and folders just fine, but the copy dvd function does not work.

Dude.  Read the thread.  Some people put out quite a bit of effort to bring you this wonderful software, free of charge.  The least you could do is read through the thread to see this is a known issue.

spoon fed.

[andy.macht]

i have a problem with xexmenu too:

if i startet the live version with an usb-stick in it. the next time i start xexmenu i have to put in the usb-stick, ot it wont start!

i deletet and copied xex again on the hdd -> the same
startet from dvd -> the same
deletet the "unknown save game" -> the same!

it starts only with the usb-stick!

now i try to reflash the xbr...

edit: did not work. its sth on the hdd... but what? any one who knows?

This post has been edited by andy.macht: Jan 22 2010, 08:09 PM

[savagepoop]

QUOTE(andy.macht @ Jan 22 2010, 07:05 PM)

i have a problem with xexmenu too:

if i startet the live version with an usb-stick in it. the next time i start xexmenu i have to put in the usb-stick, ot it wont start!

i deletet and copied xex again on the hdd -> the same
startet from dvd -> the same
deletet the "unknown save game" -> the same!

it starts only with the usb-stick!

now i try to reflash the xbr...

edit: did not work. its sth on the hdd... but what? any one who knows?

seems like its a common problem at the min as its still in early stages. hopefully there will be a update soon with a few bug fixes

[dufc1983]

excellent app no issues here well only small issue it doesn't find snes360 even though its in my Emulators directory on root of 500gb hard drive,finds games no problem

hopefully in future versions they add support of 2 disc titles like mass effect so u can rip both discs into one directory without it mentioning to insert disc 2 when needed

in regards to the poster having issues with not being in order,google Fatsorter i think 1.0.4 is latest version,run it on your pc and point it to the directory where your games are stored and it will auto sort them in order

This post has been edited by dufc1983: Jan 22 2010, 10:01 PM

[Midnight Tboy]

am I just being blind...or is there no way to select multiple files yet on this?

[dinzy]

I have the same USB issue.  I used Xexloader to run Xexmenu off usb and used that instance to install xexmenu live onto my attached hdd.  

When I run the XEXmenu without the USB key installed it just hangs.  If I leave the USB key in the xbox gives e71, that and the fact that the usb key is attached to my keys makes the whole issue annoying.  But atleast I know how to get it to work.

[dlav]

This gets better and better!

I have a question. Is the team aware of the high gpu usage this program has?

Here is my example with a jtagged falcon.

Start the console, open xexmenu, let it idle for 15 minutes. The gpu gets around 72°C.

I close xexmenu, return to nxe and instantly i hear the fans spin down. Wait 30 seconds and then open xexmenu again.

GPU temp is around 60°C! This goes up FAST. In a minute it's back at over 70°C.

How can the program put so much stress on the gpu so fast?  

[DrexeL_UK]

QUOTE(dlav @ Jan 23 2010, 02:49 PM)

This gets better and better!

I have a question. Is the team aware of the high gpu usage this program has?

Here is my example with a jtagged falcon.

Start the console, open xexmenu, let it idle for 15 minutes. The gpu gets around 72°C.

I close xexmenu, return to nxe and instantly i hear the fans spin down. Wait 30 seconds and then open xexmenu again.

GPU temp is around 60°C! This goes up FAST. In a minute it's back at over 70°C.

How can the program put so much stress on the gpu so fast?  

I've noticed this too. My GPU is actually cooler after a gaming session than sitting xexmenu FTP'ing games over :/

[Sascoo]

Is it possible to use this without a 360 hdd?  I want to use this with an external only.

[norm360]

QUOTE(cardyology @ Jan 18 2010, 11:34 PM)

I am also having this problem. xexmenu is installed in my original 120gig HDD, i also have both versions of the intallers (xex & live) on a usb key. When I remove the key from the xbox, xexmenu wont boot, even though its installed on the HDD.

I tried deleting the "unknown save game" thing off my hdd but it didnt fix the problem.

I followed the advice of the post on the 1st page. I deleted the unknown game, then installed a game using copydvd. Now it loads without having USB installed.

[lithium210]

QUOTE(DrexeL_UK @ Jan 23 2010, 10:17 AM)

I've noticed this too. My GPU is actually cooler after a gaming session than sitting xexmenu FTP'ing games over :/

same here with my falcon at around 70!  I added a 60mm fan over the gpu copper extension and my gpu temp dropped down to 56.

[aubrey_76]

QUOTE(Jbonzo @ Jan 20 2010, 07:29 AM)

There are already skins over at the dev site. What you could do is use the xex version and use QuickBoot to launch it.

But completly unrelated i found out that the copy/paste function is much better now as i can use it to add to folder. Let´s say i want to add a couple of xbla games to the hdd from USB i can copy the 0000000000000000 folder on USB and copy it over to the content folder on the xbox hdd. It will ask me to overwrite and instead of deleting the folder first and i only have the couple of games. They get added to the folder.

One thing that is a bit irritating, i have over scan problems with skins. Classic works fine though on my 42" Plasma at 720p via component.

Is there a way to add the new skins without using the XEX version? I have gone through every folder on the PC and I think pretty much every folder in the XEXmenu and I do not see aplace to add the new skins.
 I am using the LIVE Version.