Topic: Xexmenu 1.0 (formally Xexloader) (Read 3316 times)

maximilian0017 · « **Reply #240 on:** January 25, 2010, 09:05:00 AM »

i have blackscreen when starting, after some time it just wouln't start up anymore, removed savegame but no joy..

Only using original 20GB hd

Sascoo · « **Reply #241 on:** January 25, 2010, 09:44:00 AM »

I had that when I flashed with xell-1f.bin for some reason...

kipper2k · « **Reply #242 on:** January 25, 2010, 12:00:00 PM »

QUOTE(gawl4 @ Jan 25 2010, 02:13 AM)

It's 12v, the app changes how much voltage is supplied to the fans.

I built a hardware solution that allows you to set your minimum fan speed AND have full auto fan speed control, it beats screaming the fans at 12v all the time and it can be installed wihout any soldering too. It will always try to run at the lowest speed possible idling speed setting and increase speed as required. The user can adjust the idling speed to suit their 360.

Xexmenu is a gpu hog too, at least a 3 - 5 degree increase in Xexmenu compared to sitting in the main dashboard

http://forums.xbox-s...howtopic=703046

My Webpage

nevernow · « **Reply #243 on:** January 25, 2010, 12:54:00 PM »

Used Xexmenu for a while; an official HDD, a USB HDD and a flash drive were connected in some cases, not in others. Now if the flash drive is connected when I start Xexmenu, the console freezes to a black screen. If I connect it just after the app is started, all is fine. Does anyone have an idea what the problem could be?

jihaut · « **Reply #244 on:** January 26, 2010, 03:39:00 AM »

QUOTE(nevernow @ Jan 25 2010, 07:54 PM)

Used Xexmenu for a while; an official HDD, a USB HDD and a flash drive were connected in some cases, not in others. Now if the flash drive is connected when I start Xexmenu, the console freezes to a black screen. If I connect it just after the app is started, all is fine. Does anyone have an idea what the problem could be?

A wild guess from an inexperienced noob (myself) would be that there's so much data on your external that when Xexmenu attempts to load it all as well as it's own resources it causes a crash?

pu1se · « **Reply #245 on:** February 03, 2010, 07:09:00 PM »

QUOTE(nevernow @ Jan 25 2010, 09:54 PM)

Used Xexmenu for a while; an official HDD, a USB HDD and a flash drive were connected in some cases, not in others. Now if the flash drive is connected when I start Xexmenu, the console freezes to a black screen. If I connect it just after the app is started, all is fine. Does anyone have an idea what the problem could be?

I seem to have a similar problem. Just got my pre-jtagged console, loaded up xexmenu 1.1, transfered the files to my original 250gb drive using the xexmenu cd (or dvd in my case), got a game rip to work fine from my usb HDD but now I have issues with black screen whenever my usb drive is connected and trying to load xexmenu. If I disconnect the usb hdd and delete the unknown game save file, all seems well until the next time I boot a game. Not sure what needs to happen, but a fix or workaround would be nice.

This post has been edited by pu1se: Feb 4 2010, 03:10 AM

pu1se · « **Reply #246 on:** February 03, 2010, 08:26:00 PM »

QUOTE(pu1se @ Feb 4 2010, 04:09 AM)

I seem to have a similar problem. Just got my pre-jtagged console, loaded up xexmenu 1.1, transfered the files to my original 250gb drive using the xexmenu cd (or dvd in my case), got a game rip to work fine from my usb HDD but now I have issues with black screen whenever my usb drive is connected and trying to load xexmenu. If I disconnect the usb hdd and delete the unknown game save file, all seems well until the next time I boot a game. Not sure what needs to happen, but a fix or workaround would be nice.

Ok, think I figured out my problem. There were system files that were on the USB HDD that I think were messing with xexmenu. I didn't bother formatting as the drive was already formatted to fat32 and immediately started throwing stuff on it. Upon removing these files, all has been well.

Kind of a unique set of circumstances but maybe this might help someone.

nevernow · « **Reply #247 on:** February 04, 2010, 05:01:00 AM »

Problem solved here, too. My flash drive was probably formatted in some unconventional fashion, I found out it caused problems in my standalone Xvid player as well. Since it worked fine in Linux and Windows computers, it took a while to find out. Nothing wrong with Xexmenu!

tonyintn · « **Reply #248 on:** February 09, 2010, 09:15:00 AM »

I am new to this and been searching for an answer but can't find one. I have the xexmenu 1.1 no problems there I also am able to FTP and copy and delete files off the hard drive. However xexmenu never show my programs, apps and games on the menu. My emulators and games work find without the xexmenu but I would like all of thus to show up in the folders of the xexmenu app.

Is there something else I need to do to get this to work and show the proper files in their directories?

nevernow · « **Reply #249 on:** February 09, 2010, 10:45:00 AM »

First two things to check:

- apps, games, emus must be in certain fixed paths to be discovered by Xexmenu

- if you configure Xexmenu to only discover executables named "default.xex" you won't see XM360 and several others, unless you have renamed them

hfmls · « **Reply #250 on:** February 10, 2010, 02:27:00 AM »

please add sort by name in game list.everytime i upload a new game it shows without sorting.

btw, when new version?

Redsquirrel · « **Reply #251 on:** February 22, 2010, 03:54:00 AM »

QUOTE(hfmls @ Feb 10 2010, 11:27 AM)

please add sort by name in game list.everytime i upload a new game it shows without sorting.
btw, when new version?

Yes this is most annoying - all my games are all over the place in the list

do i need to patch the xex files? I haven't needed to yet...

Lurkin · « **Reply #252 on:** February 27, 2010, 06:56:00 AM »

Which FTP program are you guys using? I am using FlashFXP and it seems to hang at the 100% mark on files larger than around 750mb. It hangs for about a minute, then it reconnects to the FTP, but the file shows it's the complete size so it seems like it transfered ok even though it says failed in the status but the file size is exact.

boxer25 · « **Reply #253 on:** February 28, 2010, 09:55:00 PM »

QUOTE(akula169 @ Jan 17 2010, 09:50 PM)

Disable passive?

This worked for me http://www.nodans.co...rectory-Listing

benten2000 · « **Reply #254 on:** March 10, 2010, 09:46:00 AM »

I have a 3.5 500gb HDD attached to the system (wired & powered internally) which shows up nicely in NXE.
Got Xexmenu to load fine its just I don't know what right partition to put the Apps/Game folders so xexmenu can scan and find them.

Author Topic: Xexmenu 1.0 (formally Xexloader) (Read 3316 times)