Topic: Flash360 v1.0 (Read 997 times)

8MM · « **Reply #90 on:** January 19, 2010, 03:37:00 AM »

QUOTE(Redline99 @ Jan 18 2010, 08:20 PM)

Because my code is Sh*t and I don't feel like showing everyone. If you have a problem with that, make your own.

What an honest bloke, but im sure your code is better than mine!

bLiGhTy · « **Reply #91 on:** January 24, 2010, 05:52:00 AM »

at what stage does it ask you if you want to keep your config & kv? i dont want to go through it to find i missed it and messed my flash up?

bLiGhTy.

sdfw34t · « **Reply #92 on:** January 24, 2010, 01:57:00 PM »

Here's something alarming for you...
I have a fully operational 256 and during the full 256MB dump of the nand I got these errors:

error reading block 4c status 218
error reading block 6a status 208
error reading block 1b0 status 210
error reading block 1b1 status210
error reading block 24b status 250
error reading block 7ca status 250

And when I dumped the 64MB part I got the same errors except the last two, because they were "out of range".

One might say I just have lots of bad blocks, but I know I only have one (B48) in the 64MB range, and it doesn't even show that one in the error report!!!

What are all these errors?

XmemphistoX · « **Reply #93 on:** January 26, 2010, 02:11:00 PM »

Question from a noob.

I am buying a jtagged falcon from someone. Is this how I am supposed to install XBR from scratch? Do I need to inject a kv and config file?

1)install xexloader from cd/dvd
2)download xbreboot.bin and flash360 v1
3)rename xbreboot.bin to XXXX.bin (forgot the name will look it up later)
4)load flash360 from xexloader
5)flash nand

It'll ask if I want to keep my old KV and Config which I will say yes to.

What is this talk about moving bad nand blocks? How do I know which blocks to move and where if I run across these problems?

This post has been edited by XmemphistoX: Jan 26 2010, 10:23 PM

cardboardbox · « **Reply #94 on:** February 11, 2010, 11:40:00 PM »

When I push the eject button to turn on my 360 I get Xell. Power button boots into XBR. Can I use Flash360 to overwrite Xell with Xellous? I was thinking I'd rename xell-2f.bin to updflash.bin and put it on a usb drive. Once in Flash360 would I select option A? The LPT wires have been removed and the case reassembled so I'm not really looking forward to going back to the lpt method.

Am I on the right track?

xxpittbullxx · « **Reply #95 on:** February 12, 2010, 12:11:00 AM »

QUOTE(cardboardbox @ Feb 12 2010, 01:40 AM)

When I push the eject button to turn on my 360 I get Xell. Power button boots into XBR. Can I use Flash360 to overwrite Xell with Xellous? I was thinking I'd rename xell-2f.bin to updflash.bin and put it on a usb drive. Once in Flash360 would I select option A? The LPT wires have been removed and the case reassembled so I'm not really looking forward to going back to the lpt method.

Am I on the right track?

Rename xell-2f.bin to updslot0.bin and place in the root of your USB drive or stick
In flash360 press button B (write update area of rebooter)
Then button A (write updslot0.bin (xell) )

hope this help

cardboardbox · « **Reply #96 on:** February 12, 2010, 08:56:00 AM »

QUOTE(xxpittbullxx @ Feb 12 2010, 01:11 AM)

Rename xell-2f.bin to updslot0.bin and place in the root of your USB drive or stick
In flash360 press button B (write update area of rebooter)
Then button A (write updslot0.bin (xell) )

hope this help

lol, cute dog!

Just to make sure, doing this wont overwrite or do anything else to XBR right?

jeffrey92 · « **Reply #97 on:** February 24, 2010, 10:45:00 PM »

Can you use flash360 to swap keyvaults?

I want to put a banned kv into my nand and just use that since theres no point in having an unbanned kv since i wont be connecting to live

doveman007 · « **Reply #98 on:** March 02, 2010, 04:28:00 PM »

What does (write update area of rebooter) actually do?

I just need to flash an updpatch.bin so I'd like to know what this other step does before I go ahead.

rulnip · « **Reply #99 on:** March 15, 2010, 02:38:00 PM »

Thanks for this wonderful program. I had flashed my nand but the lpt was not very reliable and I had to flash it like 5 time to finally get it working. I used this to flash it from the console and everything worked perfect.

I dumped the Nand that I had flashed with LPT before I used this. Then I flashed with this software from the xbox and then dumped the nand again to compare the 2 just to see if my Nand flash was the issues I been having the last few weeks since I flashed it.

I compared the before (from lpt) and after (from flash360) nand and there were many differences. So it was no wonder I was having issues with my Xbox the last few weeks. I bet it was not flashed right before.

holyjewsus · « **Reply #100 on:** February 03, 2020, 03:20:00 PM »

since there is apparently a new system update on april 6th, how do we go about reflashing xbr entirely?

I realize we'd have to wait until the new xbr comes out.

I just mean, what files would we need to rename and what options would we use?

Piratesmustperish · « **Reply #101 on:** May 13, 2010, 07:10:00 AM »

I am getting this option. It seems as though my nand isn't zero paired. How much of an issue is this?

(IMG:http://www.xbox360xperts.com/tutorials/flash360_upd/flash_upd13.jpg)

here is my original post outlining my issue:

xbox-scene post

can anyone give me advice?

Author Topic: Flash360 v1.0 (Read 997 times)