Topic: Flash360 v1.0 (Read 1000 times)

krizalid · « **Reply #15 on:** January 15, 2010, 10:03:00 PM »

QUOTE(keine @ Jan 15 2010, 11:49 PM)

Could someone explain how to use this program, I don't follow, using an orig.bin and aXbr.bin

Thanks.

Not too sure, but I think the readme says to add these files to root of a USB (best way I think)

usb:\default.xex
usb:\media\ (folder that came with this release)
usb:\updflash.bin ( this is the full nand you'll be flashing. Make sure your kv and config are injected).

Run the app and watch it do the magic.

I'll test when I get home.

I'm too waiting for the Xell version. will defenetly help me on my technique of installing XBR from fresh.

Check post #8 here: http://forums.xbox-scene.com/index.php?sho...02428&st=0#

Cheers!!!

sensi420 · « **Reply #16 on:** January 15, 2010, 10:07:00 PM »

Download the Xbreboot.bin for ur console type. Rename it to updflash.bin and put it on root of USB.
Launch FlasH360 via xexloader,viper360,etc
Follow on screen steps.
When u get to the flash part tell it to flash everything but keep kv and config original. it will flash XBreboot on ur nand and skip over ur kv and config block.
Follow the steps on screen to backout. let it countdown it will auto shut off ur console. After that unplug ur pwr supply for 15 seconds . reconnect and power up.

keine · « **Reply #17 on:** January 15, 2010, 10:22:00 PM »

this will work with 16mB nands?

Redline99 · « **Reply #18 on:** January 15, 2010, 10:24:00 PM »

works on all hardware

krizalid · « **Reply #19 on:** January 15, 2010, 10:24:00 PM »

works for any size nand dude.

ddd1 · « **Reply #20 on:** January 15, 2010, 10:24:00 PM »

Wow thank you very much for this! Keep up the good work

xkilla7680 · « **Reply #21 on:** January 15, 2010, 10:26:00 PM »

where is this located in usual place

thank you

8MM · « **Reply #22 on:** January 15, 2010, 10:27:00 PM »

This is for all the idiots that dremmel'd their cases with those dodgy cable mods

xkilla7680 · « **Reply #23 on:** January 15, 2010, 10:29:00 PM »

lol still need dir listing please

keine · « **Reply #24 on:** January 15, 2010, 10:35:00 PM »

QUOTE(krizalid @ Jan 16 2010, 06:03 AM)

Not too sure, but I think the readme says to add these files to root of a USB (best way I think)

usb:\default.xex
usb:\media\ (folder that came with this release)
usb:\updflash.bin ( this is the full nand you'll be flashing. Make sure your kv and config are injected).

Run the app and watch it do the magic.

I'll test when I get home.

I'm too waiting for the Xell version. will defenetly help me on my technique of installing XBR from fresh.

Check post #8 here: http://forums.xbox-s...o...02428&st=0#

Cheers!!!

Worked perfectly for me. 16 mB Falcon. Left config blocks in place from Xbre v1.
Thanks, Redline for this spectacular tool and all the dedicated hard work put into this tool and countless furthering of the scene.

ThE MaSTeR 3 · « **Reply #25 on:** January 15, 2010, 10:52:00 PM »

So what happens when all the exploitable 360s RROD? My understanding is only 7 months of exploitable jaspers were made. Everything pre jasper basically has a 100% failure rate over 3 years.

sensi420 · « **Reply #26 on:** January 15, 2010, 10:55:00 PM »

xbins

/XBOX 360/dashboards/Flash360/

xkilla7680 · « **Reply #27 on:** January 15, 2010, 11:06:00 PM »

sensi420
thank you for that

Ranger72 · « **Reply #28 on:** January 15, 2010, 11:10:00 PM »

QUOTE(8MM @ Jan 16 2010, 12:27 AM)

This is for all the idiots that dremmel'd their cases with those dodgy cable mods

You have any idea how many people ask me to do that to their consoles? So glad there wont be a point in doing that anymore.

InsaneNutter · « **Reply #29 on:** January 15, 2010, 11:15:00 PM »

Fantastic news!

Now all we need is a "recovery mode" in-case of a bad flash like the PSP has when you hold right trigger down and power it, then we can all unsolder the LTP flasher wires for good!

Maybe something like that already exists?

Author Topic: Flash360 v1.0 (Read 1000 times)