Print

[rameysblackbelt]

Been using this for long time always worked but today i tried rip dead island riptide , it does rip it but when i test it with abgx360 it says not vailid game so it dont do any updates to it then when i try burn to a dldvd my xbox says its a video not a game,,
im not having this trouble with other games just this dead island  can anyone tell me the problem ?

[finalman]

Don't know if it's just my setup but I've just ripped an XGD3 game with the new xbc and a lite-on v3 0800 drive and dumping of the topology data ONLY took about an hour plus another 15 minutes for the game data to rip.

Can someone else please try this and see if your setup is similar to my ripping times.

[xboxdawg]

Yeah same results here. It's slow but as long as it works I'm happy!

[jamiebarrington]

Great stuff, great work and great timing just as 3.0 gets released

[finalman]

I also had an error at the dumping of the security sectors part requiring me to eject the game and reinsert it for it to continue. The log follows with the error parts bolded. Do you think the iso should be OK to use or should I redo it?

[kaldi's apostle]

I also had an error at the dumping of the security sectors part requiring me to eject the game and reinsert it for it to continue. The log follows with the error parts bolded. Do you think the iso should be OK to use or should I redo it?

[danthaman673]

Thanx again Redline 99!!  Nice work as always!!


On another note: I don't really like the sound of this/these so-called 'median' file(s) ... I plan to stick to my own XBC generated results thankyouverymuch ! :-)

[tomgreen99200]

Thanks!

[finalman]

Just a heads up I've now had a 3rd problem with this release.

Ripping another game got stuck at 0.66 of topology and the ripping drive disc speed started surging up and down now it doesn't work. Drive is still detected but will not pickup games. I'm guessing the app caused my laser to stress and burnout.

Games disc surface was 10/10 so no probs with scratches. Ripping drive was near new and only had about say only about 20 hours of use.

Thats now 3 problems with this release but I had no problems with previous releases just thought i'd give people a heads up of what could potentially happen.

[krizalid]

I know it's not recomended, but I decided to patch the isos with the generic topology *.bin files off elsewhere and they seem to work just fine.


Of course, when ABGX is updated I will rerun them to make sure they are 100% correct.

[The Dude Z]

QUOTE(finalman @ Dec 25 2011, 06:14 PM)

Just a heads up I've now had a 3rd problem with this release.

Ripping another game got stuck at 0.66 of topology and the ripping drive disc speed started surging up and down now it doesn't work. Drive is still detected but will not pickup games. I'm guessing the app caused my laser to stress and burnout.

Games disc surface was 10/10 so no probs with scratches. Ripping drive was near new and only had about say only about 20 hours of use.

Thats now 3 problems with this release but I had no problems with previous releases just thought i'd give people a heads up of what could potentially happen.

It's not the app it's your drive.
The app doesn't have any ability to increase or decrease laser voltage and sensitivity.
You simply had a weak and/or dirty laser eye.
Clean the laser eye off with a Q-tip with 1 drop of glass cleaner on one end and squeeze the Q-tip first to make sure excess water is gone then clean it with the damp end then dry it with the dry end and don't push hard at all just let it rest on the eye and twist it with no downward pressure.

[iAmMasterF]

c4e already stated that you don't need to re rip an original disc, you can just use the backup of an iso and just inject the new bin file which replaces the old ap25 sector.

i think the 0800 drives are a waste of cash tbh

QUOTE(krizalid @ Dec 26 2011, 01:43 AM)

I know it's not recomended, but I decided to patch the isos with the generic topology *.bin files off elsewhere and they seem to work just fine.
Of course, when ABGX is updated I will rerun them to make sure they are 100% correct.

the universal topology files was released by c4e and it's safe, xgd3's use the same topology info so one patch currently works for all. as for xgd2's only mw2,bo & reach are available.

[finalman]

QUOTE(The Dude Z @ Dec 26 2011, 01:47 AM)

It's not the app it's your drive.
The app doesn't have any ability to increase or decrease laser voltage and sensitivity.
You simply had a weak and/or dirty laser eye.
Clean the laser eye off with a Q-tip with 1 drop of glass cleaner on one end and squeeze the Q-tip first to make sure excess water is gone then clean it with the damp end then dry it with the dry end and don't push hard at all just let it rest on the eye and twist it with no downward pressure.

OK I cleaned the laser and it's working again thankgod for that. I've also been able to do a complete dump now without any errors or problems occurring.

[finalman]

So whats safer ripping the topology data ourselves with our 0800 drives or injecting C4evas universal ones?

[DrPhantum]

Cleaned the laser in my BenQ VAD6038 w/ 0800 v3 firmware, and it's still not working right for me.   GOW3 isn't working... and I even tried Left4Dead 2 just to make sure it wasn't a "new game" thing.

Still... every time I try to close the program, I have to do it through task manager.  The program freezes every time I click CANCEL or attempt to close through the X.

Any help?