Print

[radoman]

Rude boi, just needin a new abgx now.

So ap25 sectors come from a DAE.bin?

eta: Thanks redline99

[Redline99]

NOTE:

Burning XGD3 is not supported yet in xbc, this release is for ripping only.
Use imgburn from outside of xbc for now.

XGD3 stealth checks not supported either, use abgx360 when available.

[eddy315west]

Thanks Redline99

[shloader]

Having to fetch the DAE is pretty much as expected. Thanks for the release Redline99. Itching to test it out as soon as I get that DAE.

[eddy315west]

can you point me to a guide how to flash a liteon 74850 drive to this 0800v3 firmware cuz when i
load xbc i get this

AP25 cannot locate dae.bin file

Getting media info [M]
   Media Type: Not Present

and i have my original gow3 disc in the drive . any help would be apreciated . thanks

[chorizo1]

QUOTE(eddy315west @ Oct 2 2011, 09:18 PM)

can you point me to a guide how to flash a liteon 74850 drive to this 0800v3 firmware  

Just put the liteon ready as if you were gonna flash it. set the 800 firmware as target firmware then write. It will tell you about not having key, or spoof etc. ignore and just flash.

[shai12]

QUOTE(ArcticWolf @ Oct 3 2011, 01:04 PM)

My understanding is that Gears of War 3 uses the XGD3 format.
If Xbox Backup Creator 2.9 supports XGD3, then we should be
able to copy GoW3 and create an ISO image file.  Correct?
And then use ImgBurn to burn the DVD?
I have an old Xbox 360 with a Hitachi drive flashed with GaryOPA 2.3.
I have an old Samsung SH-D162C.
Would I be able to copy and play Gears of War 3?
Any advice/suggestion would be appreciated.
Thank in advance.

You will need a BenQ or a phat liteon using the new IXtreme 3.0 0800 firmware to rip it

[DodgeM4s]

QUOTE

*** NOTE *** This build of XBC does not support older Xtreme ripping firmwares (Kreon drives are still supported though). Use abgx360 at http://abgx360.net for more thorough Stealth Checking

So does this mean my old Samsung SH-D163B with new xbc can be used for XGD3?

[ArcticWolf]

QUOTE(shai12 @ Oct 3 2011, 04:42 AM)

You will need a BenQ or a phat liteon using the new IXtreme 3.0 0800 firmware to rip it

Shai12, thanks for your reply.
If I were to obtain a backup copy of Gears of War 3 from someone else,
then would I be able to play it on my old Xbox 360?

[Aldanga]

QUOTE(DodgeM4s @ Oct 2 2011, 10:58 PM)

So does this mean my old Samsung SH-D163B with new xbc can be used for XGD3?

No. Only 0800 v3 support XGD3.

[BigSteel]

QUOTE(Aldanga @ Oct 2 2011, 11:39 PM)

No. Only 0800 v3 support XGD3.

Can you use a Kreon drive and then run it thru ABGX to patch it properly, or is Kreon right out the window for XGD3?

[Aldanga]

Kreon cannot read or rip XGD3.

[Redline99]

Kreon, Samsung and Hitachi are still supported by the XBC but, they cannot properly rip XGD3. They are for XGD2 only if even then they don't support AP25. Eventually those drive will be completely obsolete.

[Bad_Ad]

Didnt TX and C4E say DAE.bin method (which was the method the russians were using) was "wrong" and slammed them as "not safe"

now they are using the same method?

http://forums.xbox-s...o...30970&st=15

Same as there was "no way to unlock slim liteon's" - buy our PCB" and then the russian group released an unlock?

All just seems like public propaganda

[OggyUK]

No,

Redline uses each dae.bin for the ap2.5 challenge set for that dashboard. The actual disc generates the response.

Then it records the relevent responses.

They were using dae.bin's target and adding jitter.