Topic: JungleFlasher v0.1.85 (257) (Read 546 times)

an01523 · « **Reply #30 on:** July 22, 2011, 08:36:00 AM »

Next problems:

both 0225 (labeled as 0225) and 0225 (labeled as 9504) have sometimes "play dvd" problem.
After flash it works first time, after some power on/off the xbox -> "play dvd"
Another power on/off few times and it works again.
Something is fault here!

NoodlyAppendage · « **Reply #31 on:** July 22, 2011, 09:04:00 AM »

QUOTE(an01523 @ Jul 22 2011, 04:36 PM)

Next problems:

both 0225 (labeled as 0225) and 0225 (labeled as 9504) have sometimes "play dvd" problem.
After flash it works first time, after some power on/off the xbox -> "play dvd"
Another power on/off few times and it works again.
Something is fault here!

Sounds like there is still some incorrect data in the dummy.bin. That would suck because you have overwritten the flash with junk from JF

Geremia · « **Reply #32 on:** July 22, 2011, 10:06:00 AM »

There is a chance you lost something with the jf dummy, but seems not your case

PM sent

an01523 · « **Reply #33 on:** July 22, 2011, 11:43:00 AM »

Thanks for PM.

It seems my 0225 (Label 9504) is not a 0225u? If i flash LT0225u.bin (sent me in PM, and also the original one), then no booting at all. If i flash LT0225.bin (made with fixed DUMMY.bin), it boots sometimes and sometimes not.

Pady in gulli forum figured out, that you have to read after flash. This is very tricky, because you have to connect and disconnect resistor to read FW and then restore/erase/write sector 0xE3000 (automaticaly by JF after reading).

After read/dump the FW, sector E3000 is written again - and then no more "play DVD".

BxBrotha730 · « **Reply #34 on:** July 22, 2011, 06:27:00 PM »

ok i need a bit of help here...running JF 1.85 have the latest firmware for all drives.

i have a slim drive stock 0225 and i am using x360usb pro........i retrieved the key......but im tryng to flash drive.....it doesnt auto load for some odd reason, so i go and manually had the firmware for 0225 and click spoof. when i click write it immediately hands where it says "sending chip erase"..happens on both my desktop and laptop..can someone help n provide valid info on what i need to do?

LittleBH · « **Reply #35 on:** July 22, 2011, 07:19:00 PM »

QUOTE(Geremia @ Jul 20 2011, 03:49 PM)

calibration data? maybe you dind't understand again what's that data for.
Aside the fact that "calibration data" in fat liteons was just a "manufacturer test log", here the "manufacture test log" is at 3F000, and what you see at 1FF80 is "manufacturing tests commands"
Do you think that only 0225 has this 1FF80 different? nope! these are manufacturing tests commands, not all drive have been tested against the same sequence of commands. Also 9504 had different 1FF80.

Tested this one myself - Geremia, you have more technical know how than me - however - you are wrong on this one!

OggyUK · « **Reply #36 on:** July 23, 2011, 12:59:00 AM »

Did anyone actually test v0185 (257) on non USB?

an01523 · « **Reply #37 on:** July 23, 2011, 05:31:00 AM »

With VIA 6421 (no driver installed) and JF1.85 i cant get status 0x72 on 0225 Liteon. With USBPRO it works.

VivaLaMikey · « **Reply #38 on:** July 23, 2011, 06:43:00 PM »

QUOTE(OggyUK @ Jul 23 2011, 06:59 PM)

Did anyone actually test v0185 (257) on non USB?

I dont use the usb and it still bugging out for me, im still using sata + maximus 360 xtractor

0x13h · « **Reply #39 on:** July 23, 2011, 08:27:00 PM »

i've LiteOn 16D4S 0225

Im trying to flash my drive with last c3v4 release and JF 1.85 (257)

Y retrieve a error: Slim-Un-Lock command returned a error.... Unlock Failed

What is that?... how to solve?

thanks!

OggyUK · « **Reply #40 on:** July 24, 2011, 04:48:00 AM »

QUOTE(VivaLaMikey @ Jul 24 2011, 01:43 AM)

I dont use the usb and it still bugging out for me, im still using sata + maximus 360 xtractor

I meant efore it was released, everyone has a USB, sems they all only tested it on USB only.

Last JF I used (and still do) Is 1.85 build 252 - I only use a laptop now so USB only for me.

QUOTE(0x13h @ Jul 24 2011, 03:27 AM)

i've LiteOn 16D4S 0225

Im trying to flash my drive with last c3v4 release and JF 1.85 (257)

Y retrieve a error: Slim-Un-Lock command returned a error.... Unlock Failed

What is that?... how to solve?

thanks!

Read the guide, maybe?

You slimkey an 0225, not unlock.

VieS · « **Reply #41 on:** July 28, 2011, 01:09:00 AM »

Please help with my issue.
Will my DG-16D4S 9504 be locked, if i flash it with 0225 orig, and update dashboard to new version?

This post has been edited by VieS: Jul 28 2011, 08:09 AM

skater411 · « **Reply #42 on:** July 29, 2011, 10:28:00 PM »

fixed

This post has been edited by skater411: Jul 30 2011, 06:08 AM

skater411 · « **Reply #43 on:** July 29, 2011, 11:07:00 PM »

hi i have liteon 74850c model number dg-16d2s i update to the newest dashboard up date with a usb drive now the console want play any back up games how do i flash my lite on drive back to stock firmware that all i need help with please help thx still need to know how to flash ti back to stock firmware an then i can do the rest thx

This post has been edited by skater411: Jul 30 2011, 06:19 AM

gsm88 · « **Reply #44 on:** August 02, 2011, 03:48:00 PM »

Hi all!

I have a 0225 drive (labeled as 9504), I flashed LT+1.9 0225 and 0225u with x360 usbpro, and I get everytime "Play DVD". I use TX unlocked pcb and I have original pcb with original firmware.

Please help me, how to fix it this problem?

Thanks!

Author Topic: JungleFlasher v0.1.85 (257) (Read 546 times)