Topic: Jungleflasher V0.1.79b (208s) (Read 407 times)

OggyUK · « **on:** February 20, 2011, 07:00:00 PM »

JungleFlasher v0.1.79b (208S)

PhatKey Suport.

http://www.junglefla.../downloads.html

JungleFlasher 0.1.79(208S)
========================================

PhatKey support
----------------------------------------
Support for Lite-On key extraction, Using Pógó Mo Thóin DIY probe or Xecuter Probe III.
Thanks to Maximus & Co for the un-released original Concept.
Guide: http://bit.ly/hdtHsa

Hitachi Support
----------------------------------------
Gui changes in Hitachi::Drive area.
[Refresh] in Winapi no longer scans for new hardware
[Scan] added to scan for new hardware separately
[Remove] removed, but added to context menu for convienence
JF will accept system message about new drives added, JF will auto refresh list for new ODD.

x360USB Support
----------------------------------------
Initial support for x360USB added - More to follow at release
LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct
file is included and should be copied to JF folder if needed.

PortIO and other DLL's
----------------------------------------
We followed schtroms lead and embbed the Portio .sys files to load from temp folder. Other required
DLL's have been embedded also. For those using Test signed drivers in x64, PortIO load function
checks JF folder for existing files and uses those if present.

k0mpresd · « **Reply #1 on:** February 20, 2011, 08:01:00 PM »

works perfect btw! (after fixed link of course.

)

syntaxerror329 · « **Reply #2 on:** February 20, 2011, 09:42:00 PM »

Works great for me! Thanks

Don't miss the new install step. "LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct file is included and should be copied to JF folder if needed."

So if you are getting the error message "This application has failed to start because libusb0.dll was not found. Re-installing the application may fix this problem."

You just need to copy that dll from the libusb folder and put it in the same folder as the .exe

pigbait · « **Reply #3 on:** February 20, 2011, 11:29:00 PM »

QUOTE(syntaxerror329 @ Feb 20 2011, 10:42 PM)

Works great for me! Thanks

Don't miss the new install step. "LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct file is included and should be copied to JF folder if needed."

So if you are getting the error message "This application has failed to start because libusb0.dll was not found. Re-installing the application may fix this problem."

You just need to copy that dll from the libusb folder and put it in the same folder as the .exe

Thanks Boxxdr, can't wait to see what your DIY scorpion looks like (IMG:style_emoticons/default/wink.gif)

tomgreen99200 · « **Reply #4 on:** February 21, 2011, 01:52:00 AM »

No cutting or soldering, doesn't get better than that. Great work and thanks for the information.

[Imported]Intruder · « **Reply #5 on:** February 21, 2011, 02:14:00 AM »

QUOTE(OggyUK @ Feb 21 2011, 03:00 AM)

JungleFlasher v0.1.79b (208S)

PhatKey Suport.

http://www.junglefla.../downloads.html

JungleFlasher 0.1.79(208S)
========================================

PhatKey support
----------------------------------------
Support for Lite-On key extraction, Using Pógó Mo Thóin DIY probe or Xecuter Probe III.
Thanks to Maximus & Co for the un-released original Concept.
Guide: http://bit.ly/hdtHsa

Hitachi Support
----------------------------------------
Gui changes in Hitachi::Drive area.
[Refresh] in Winapi no longer scans for new hardware
[Scan] added to scan for new hardware separately
[Remove] removed, but added to context menu for convienence
JF will accept system message about new drives added, JF will auto refresh list for new ODD.

x360USB Support
----------------------------------------
Initial support for x360USB added - More to follow at release
LibUSB is required, if you dont have LibUSB installed, LibUSB0.dll is required to run JF. Correct
file is included and should be copied to JF folder if needed.

PortIO and other DLL's
----------------------------------------
We followed schtroms lead and embbed the Portio .sys files to load from temp folder. Other required
DLL's have been embedded also. For those using Test signed drivers in x64, PortIO load function
checks JF folder for existing files and uses those if present.

Excellent work guys, unlike maximus this shit is free and not yet another expensive addon.... Ignore the idots...

courier · « **Reply #6 on:** February 21, 2011, 03:13:00 AM »

QUOTE

Intruder' date='Feb 21 2011, 10:14 AM' post='4781775']
Excellent work guys, unlike maximus this shit is free and not yet another expensive addon.... Ignore the idots...

agree whit you The world is full of idiots !!!!

JackintheXbox · « **Reply #7 on:** February 21, 2011, 04:19:00 AM »

Jungle had to redeem himself somehow. DIY is all nice and good but id rather pay for a professional tool than make it myself so Jungle is going to sell it as soon as they can. Probably starts selling it same time as prousb is released. Maximus has it with its lizard kit. Sure i had to pay 5£ extra to my reseller for them to include it. Some were more lucky with theire selles and got scorpion included for free.

This post has been edited by JackintheXbox: Feb 21 2011, 12:23 PM

OggyUK · « **Reply #8 on:** February 21, 2011, 04:23:00 AM »

"Jungle" arent selling anything.

This is JungleFlasher, it's free, has always been free and will always be free.

JackintheXbox · « **Reply #9 on:** February 21, 2011, 04:33:00 AM »

Thats nice.
Will the jungleflasher work with lizard in the future?

LittleBH · « **Reply #10 on:** February 21, 2011, 04:36:00 AM »

QUOTE(JackintheXbox @ Feb 21 2011, 11:33 AM)

Thats nice.
Will the jungleflasher work with lizard in the future?

why would it need to? They keep claiming it's standalone

courier · « **Reply #11 on:** February 21, 2011, 04:39:00 AM »

QUOTE(JackintheXbox @ Feb 21 2011, 12:33 PM)

Thats nice.
Will the jungleflasher work with lizard in the future?

Naaaa if you want to use lizard and JF your pc go 4ever in loop,lizard is more slowing to works whit JF

JackintheXbox · « **Reply #12 on:** February 21, 2011, 04:39:00 AM »

QUOTE(LittleBH @ Feb 21 2011, 09:36 AM)

why would it need to? They keep claiming it's standalone

Nice dodge.
Hopefuly it will be yes.
But in the meentime. I guess people who love JF are going to have to switch.

mr-crix03 · « **Reply #13 on:** February 21, 2011, 04:41:00 AM »

What he means is Lizard is far to slow for JungleFlasher

[Imported]Intruder · « **Reply #14 on:** February 21, 2011, 04:57:00 AM »

QUOTE(JackintheXbox @ Feb 21 2011, 12:39 PM)

Nice dodge.
Hopefuly it will be yes.
But in the meentime. I guess people who love JF are going to have to switch.

How is it a dodge? They have stood on a stool and said its a STANDALONE which of course you pay for.....

Author Topic: Jungleflasher V0.1.79b (208s) (Read 407 times)