Print

[fatvince]

Works perfectly under Win7 64 bit.. I'm a complete n00b and I managed it... after wasting 1.5 hours trying to use DOSFLASH which for some reason couldn't read my chipset anymore, even though it had always worked in the past it seemed not to like LT 1.1 on there and said chip is 0kb. Plugged it into Win7 and had it done in 10 minutes. Thanks heaps c6eva+team jungle+everyone who contributed or helped out!!

[Spider22]

If I have Liteon drive with LT 1.0 and no drive key  (IMG:style_emoticons/default/sad.gif)  How I can get the key from my drive ?

This post has been edited by Spider22: Nov 24 2010, 06:43 PM

[doveman007]

I guess I can just load my dummy.bin, made when I dumped my drive previously, as the Source firmware and then Autoload LT+ to create the new firmware.

I don't have the calibration data as I decided it wasn't worth the extra effort to dump it, but I assume that won't affect how LT+ works.

[360360]

QUOTE(Spider22 @ Nov 24 2010, 06:42 PM)

If I have Liteon drive with LT 1.0 and no drive key    How I can get the key from my drive ?

by doing the mra hack or use the xecutor lt switch  

[iateshaggy]

lt switch sucks, use mra or boxxdr

[Spider22]

So i have to do mra hack like in Liton v3 ? And dump firmware?

What about Benq with LT firmware (no key)? Also need mra hack? I newer see diagrams  for mra hack for benq drive  

[fr3gu]

QUOTE(bullka @ Nov 24 2010, 08:49 AM)

Is the procedure correct to flash from LT1.1 to LT+ (keeping in mind that I have Lite-OFW.bin, Key.bin, Lite_CFW.bin which were produced during flashing from stock to LT1.0):

1.   Download JungleFlasher v0.1.76
2.   Place LT+ bin files to JF\firmware folder
3.   Run the JF
4.   In FW TOOL 32 tab open source firmware by selecting Lite-OFW.bin file. Then pres Yes for autoloading LT iXtreme. We should get this putput:

QUOTE

a. Auto-Loading firmware file C:\.........\LTPlus-934.bin
b. MD5 hash: dc6b675de4c58a353d830f99a4a03d2e
c. Genuine LT-Plus
d. Drive key @ n/a 77777777777777777777777777777777
e. Firmware Osig: [PLDS DG-16D2S 9345]
f. Firmware is: LT-Plus
g. Spoofing Target
h. DVD Key copied to target
i. Inquiry string copied to Target
j. Identify string copied to Target
k. Serial data copied from Source to Target
l. Calibration data copied from Source to Target

5.   Once autospoofing is completed, press Save to File the new firmware which is going to be uploaded to Liteon later.
Is all above correct?
Could anybody provide the detailed  steps to follow how to connect Liteon drive (including instructions how to power the DVD Drive in case I own only one xbox) and to flash it (keeping in mind that required Via sata controller is in place).

Thanks!!!

Yes, this is correct.

Also, with the drive powered on and visible in "DVDKey 32"-tab, go back to "FirmwareTool 32" tab and right-cklick near the original key and select "Verify Key" to make sure you have the correct .bin .
You should see "Key has been tested and verified, thanks C4eva !" in the output window.