Print

[iwanttheagrocrag]

If anyone gets the error screen that says "'ibuild.exe is not recognized as an internal or external command"
Just put your original nand file in the root directory if this program. It worked fine after i did that.

This program is really awesome just because of the fact you can easily do the AUD_clamp fix which is very good.

[bbarry]

This killed my xbr 8955 box, no more startup... my son will be pissed!

[bbarry]

anyone have any ideas? refuses to boot with this. reflash xbr and boots fine.

xenon running xbr 8955
CB 1921
CD 1921
CE 1888
CF 4532
CG 4532
SMC 1.51

---------------------------------------------------------------
     fbBuild v0.01
---------------------------------------------------------------
verbose set to level 1
loading cpukey.txt from .\xenon\cpukey.txt
CPU Key set to: 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
loading 1blkey.txt from 1blkey.txt
1BL Key set to: 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX sum: 0xXXX (expects: 0xXXX)
output name overridden to: xenonfb.bin


Writing initial header to flash image
Loading bootloaders
reading .\bin\payload.bin (0x200 bytes)
reading .\xenon\smc.bin (0x3000 bytes)
reading .\xenon\kv.bin (0x3ff0 bytes)
reading .\data\cb_1921.bin (0x9800 bytes)
reading .\data\cd_1921.bin (0x56c0 bytes)
reading .\data\ce_1888.bin (0x5606a bytes) padding to (0x56070 bytes)
reading .\data\cf_4532.bin (0x44c0 bytes)
reading .\data\cg_4532.bin (0x2ef40 bytes)
reading .\data\cf_12611.bin (0x4450 bytes)
reading .\data\cg_12611.bin (0x5fa10 bytes)
reading .\bin\freeboot.bin (0xae0 bytes)
reading .\bin\patches_xenon.bin (0x90c bytes)
**** ldv line 3 set to 0f 00 type: 1
reading .\bin\xell-2f.bin (0x38a60 bytes)
reading .\data\cb_1940.bin (0x6720 bytes)
reading .\data\cd_8453.bin (0x5780 bytes)
done!

Encrypting bootloaders...done!

Copying crypted bootloaders into flash image...done!
Fixing up FS table...done!

Writing zeropair CG patch slot overflow data to sysupdate.xexp1...done!
Writing target CG patch slot overflow data to sysupdate.xexp2...done!

reading .\data\aac.xexp2 (0x4000 bytes)
reading .\data\bootanim.xex (0x55000 bytes)
reading .\data\createprofile.xex (0xc000 bytes)
reading .\data\dash.xex (0x5e4000 bytes)
reading .\data\deviceselector.xex (0x9000 bytes)
reading .\data\gamerprofile.xex (0x1a000 bytes)
reading .\data\hud.xex (0x1f000 bytes)
reading .\data\huduiskin.xex (0x11000 bytes)
reading .\data\mfgbootlauncher.xex (0x8000 bytes)
reading .\data\minimediaplayer.xex (0xc000 bytes)
reading .\data\nomni.xexp2 (0xb000 bytes)
reading .\data\nomnifwm.xexp2 (0x5000 bytes)
reading .\data\signin.xex (0x12000 bytes)
reading .\data\updater.xex (0x8000 bytes)
reading .\data\vk.xex (0x9000 bytes)
reading .\data\xam.xex (0x213000 bytes)
reading .\data\xenonclatin.xtt (0x11b000 bytes)
reading .\data\xenonclatin.xttp2 (0x18000 bytes)
reading .\data\xenonjklatin.xtt (0x1a8000 bytes)
reading .\data\xenonjklatin.xttp2 (0x7000 bytes)
reading .\data\ximecore.xex (0x15000 bytes)
reading .\data\ximedic.xex (0x90000 bytes)
reading .\data\ximedic.xexp2 (0x2800 bytes)
***** could not read .\data\launch.xex, skipping *****
***** could not read .\data\lhelper.xex, skipping *****
***** could not read .\xenon\crl.bin, skipping *****
***** could not read .\xenon\dae.bin, skipping *****
reading .\xenon\extended.bin (0x3ff0 bytes)
writing as extended.bin to flash
***** could not read .\xenon\fcrt.bin, skipping *****
reading .\xenon\odd.bin (0x40 bytes)
writing as odd.bin to flash
reading .\xenon\secdata.bin (0x400 bytes)
writing as secdata.bin to flash
reading .\xenon\smc_config.bin (0x4000 bytes)

Fixing up empty FS block entries...done!
Writing FS table to image...fstable writing to: e04000
done!
calculating ECD bytes...done!
writing file 'xenonfb.bin' to disk...done!
xenonfb.bin written OK

---------------------------------------------------------------
xenonfb.bin built, info:
---------------------------------------------------------------
console  : xenon
NAND size: 16MiB
CPU Key  : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
1BL Key  : XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
---------------------------------------------------------------
    fbBuild Finished. Have a nice day.
---------------------------------------------------------------

This post has been edited by bbarry: Nov 14 2010, 08:11 PM

[bbarry]

Well, I found out that if I do not remove power (pulling plug) to the board I can get the 12611 dash running after flashing. I can turn off the box and reboot it and it is fine. If I remove the power to the board it will no longer boot. I then have to reflash with my xbr.bin and start over. I think it is a problem with the smc code.
Any ideas on this one?

[moeom]

Easily updated my 512mb Jasper using 360 Flash's dump (not my original, which I also have).

Some things I noticed:
-My MU was unformatted and deleted. I had to reformat it. Luckily I keep the MU empty anyway
-My system settings were set back to factory default (not a big deal either)
-I lost the avatar I made for my profile (profile was saved on a HDD)
-My CPU and GPU temps are 1-2 degrees higher using the new dash (compared to 9199). I'm guessing the new dashboard is just more graphics and cpu intesive.

That is all for now.

This post has been edited by moeom: Yesterday, 12:25 AM

[moeom]

**UPDATE**

Updated my dashboard from Micro$oft's site to get my avatars back. That's resolved.

I did, however, get an e70 error (E70: Hard Drive Error - Hard drive not found) after updating the avatar pack. Why did that happen? Seems fine though after a reboot...

This post has been edited by moeom: Yesterday, 12:41 AM

[moeom]

Lol...figured it out!

On the thumbdrive that I used to update my avatars, I had default.xex in the root. That was confusing the 360 and whenever I booted with the USB drive plugged in, I got e71 error.

So for testing's sake, I removed default.xex from the root. I then left my USB thumbdrive plugged into the xbox. It booted without any errors.

I guess it was looking to launch the dashboard, etc from my dinky USB. Silly xbox.

[bbarry]

Well, I don't know what I am doing wrong but it wont boot the new dash once I pull the power cord.
I can shutdown and restart without any problems but the second I remove the power cord I get a
blank screen and no start up lights. Then have to use nandpro to reflash my xbr flash back to
restore it. I tried several builds using the stock bin. I tried building a bin file with the
xbr bin but it came back saying some files where missing. Just don't know what else to try.

[bbarry]

QUOTE(bbarry @ Nov 14 2010, 11:01 PM)

Well, I don't know what I am doing wrong but it wont boot the new dash once I pull the power cord.
I can shutdown and restart without any problems but the second I remove the power cord I get a
blank screen and no start up lights. Then have to use nandpro to reflash my xbr flash back to
restore it. I tried several builds using the stock bin. I tried building a bin file with the
xbr bin but it came back saying some files where missing. Just don't know what else to try.

For anyone that runs into the same thing I have I will document what I did to resolve it.
I was running XBR with 8955 dash when running into the above problems. I loaded freeboot
toolbox maker by BestPig and tried to make a freeboot image from my original bin. This
bin was at CB 1903 and 4552 dash. The toolbox failed with error "freeBOOT could not be
created correctly". So I used my xbr.bin that was at CB 1921 and 8955 dash. It then made
the freeboot.bin that was at 9199 dash. I used that file in easy freeboot and rebuilt
my 12611 image. It now boots properly even when the power was removed.

Hope this helps someone...

[SNAAAKE]

QUOTE(Egooo @ Nov 13 2010, 05:45 AM)

Can I use this as I have no original nand ? only xbr

I updated one using the freeboot 9199 dumped from freestyle dash. worked perfect.

[Teke_]

QUOTE(DragonNZ @ Nov 14 2010, 12:59 PM)

I just tried using freeBOOT_ToolBox_Maker25r2 (Best Pig 2.5r2) and it is still the same, hangs on the splash screen.....

Found one solution for that:
http://www.xboxhacker.org/index.php?topic=...18390#msg118390

I haven't tested it, but couple of guys get things working. Hopefully this is our solution!

[DragonNZ]

QUOTE(Teke_ @ Nov 16 2010, 05:32 AM)

Found one solution for that:
http://www.xboxhacke...18390#msg118390

I haven't tested it, but couple of guys get things working. Hopefully this is our solution!

Thank for that! it worked a treat. I ran the program over the 12611 image created by FreeBOOT Toolbox 0.04 and then update via Flash360. It now boots into the DASH fine!.
Thanks for all your help, and the help of the community in whole.  

[Bon Scott]

Thanks a lot for sharing, it worked like a charm!

[Broka]

Just used this on three of the jtags (2 Falcons and 1 16mb Jasper) I have laying around. Upgraded from freeboot 0.32 9199, worked flawlessly each time. Didn't even use the original nand dumps either. Great piece of software

PS: don't forget to install dashlaunch to bypass ap2.5

[charles3526]

i have a problem i am getting E 72 error after flashing my nand.  i have a jtag but i dont have lpt installed how can i get back to the nxe menu so i can reflash my nand?  need help any one please..........