Topic: Easy Gui Freebooter 12611 (Read 1036 times)

rastiemon · « **Reply #45 on:** November 12, 2010, 04:56:00 PM »

Anyone had success doing this on big block nands?

majoridiot · « **Reply #46 on:** November 12, 2010, 05:10:00 PM »

QUOTE(rastiemon @ Nov 12 2010, 05:56 PM)

Anyone had success doing this on big block nands?

being that the gui's author (sneakypeanut) has a BB and is posting in this thread, i'm guessing if you subscribe to it, you'll be among the first to know...

no sarcasm intended.

Chris85 · « **Reply #47 on:** November 12, 2010, 05:21:00 PM »

QUOTE(Chris85 @ Nov 12 2010, 10:31 PM)

This is good news

Suck for me, I just completely killed my non-jtagable 360 with kinect dash by reflowing a few mins ago. I was desperate to play the kinect games without the 360 going RROD, got fed up and went for a reflow. I should have read the forum earlier and just update my jtaged console.

Gonna try now, hope I dont kill my last box

Great its working on my Falcon

Haygar · « **Reply #48 on:** November 12, 2010, 06:29:00 PM »

Ok, I've just created my image from an original stock nand and all went well but it asked me if it was a falcon with a cb 5761 and I know for a fact it is 5770. Obviously I chose no and it continued to create the image. I presume it knew that it must have been 5770 after that?

I haven't flashed it yet.

Edit: It checkes out ok with a CB of 5770 in 360Flash Dump Tool so I guess all is well!?

360720 · « **Reply #49 on:** November 12, 2010, 06:29:00 PM »

Working great on my Falcon too.

Thank you very much !

AmyGrrl · « **Reply #50 on:** November 12, 2010, 06:39:00 PM »

I downloaded the updated easy freeboot which adds support for xp.... but I'm not sure what the "No Drive Fix" option does .. can someone explain that to me...

360720 · « **Reply #51 on:** November 12, 2010, 06:40:00 PM »

QUOTE(AmyGrrl @ Nov 13 2010, 01:39 AM)

I downloaded the updated easy freeboot which adds support for xp.... but I'm not sure what the "No Drive Fix" option does .. can someone explain that to me...

If you have removed the internal dvd drive (to replace with another harddrive) you use this. Most ppl don't need it.

selfser · « **Reply #52 on:** November 12, 2010, 08:38:00 PM »

What options to upgrade do I have using This Freebooter if I don't have a copy of my NAND?

Haygar · « **Reply #53 on:** November 12, 2010, 09:32:00 PM »

QUOTE(rastiemon @ Nov 13 2010, 10:56 AM)

Anyone had success doing this on big block nands?

No luck here with my JasperBB on win7 64bit

but my Falcon is running sweet with avatars and all, R6T3 still inplace.

Edit: Have done the exact procedure as for the Falcon but when ibuild is at the "press any key to continue" the application just shuts down?

modps2 · « **Reply #54 on:** November 12, 2010, 10:54:00 PM »

Is it normal to have errors when the program is patching the nand?

boflc · « **Reply #55 on:** November 12, 2010, 11:45:00 PM »

QUOTE(selfser @ Nov 12 2010, 10:38 PM)

What options to upgrade do I have using This Freebooter if I don't have a copy of my NAND?

dump your nand via 360flash, which can be found on xbins.

QUOTE(Haygar @ Nov 12 2010, 11:32 PM)

No luck here with my JasperBB on win7 64bit

but my Falcon is running sweet with avatars and all, R6T3 still inplace.

vista64, jasperBB (256), works.

QUOTE(modps2 @ Nov 13 2010, 12:54 AM)

Is it normal to have errors when the program is patching the nand?

be more descriptive, b/c "errors" could mean a lot of things. for my jasperBB, i had a couple of "cannot find" but they were more warning msgs [and didn't apply].

it'd be nice if this gui would extract out the mobile information so that we needn't "start over".

that said, i am waiting for cygnos patches for my jasperSB's. looking forward to switching between 9199 and 12611.

Haygar · « **Reply #56 on:** November 13, 2010, 12:24:00 AM »

Well it did work in the end after I clicked 'no' when it asked if my cb was 6723 (even though it is) and then it gave me an option to select my motherboard type.

Funny thing is though I had just created an image using just fbBuild but when compared to EFB's image they both checked fine in 360 Flash Dump Tool but the fbBuild one had no crl.bin, extended.bin, odd.bin or secdata.bin in the file system tab.

Haven't flashed it yet but EFB's file structure is the same as my Falcon created one so I think I'll trust that.

Inuyasha152 · « **Reply #57 on:** November 13, 2010, 01:12:00 AM »

Jasper 512mb. I'm getting "cannot read" errors..

CODE

***** could not read .\data\launch.xex, skipping *****
***** could not read .\data\lhelper.xex, skipping *****
***** could not read .\data\\dae.bin, skipping *****
***** could not read .\data\\fcrt.bin, skipping *****

Using a freeboot 0.032 dump.

Haygar · « **Reply #58 on:** November 13, 2010, 01:44:00 AM »

Another satisfied JasperBB customer. Updated smoothly with this app. and also avatar updated with the official, all with R6T3 intact.

Edit: @Inuyasha, I used my orig nand to build if you have that?! And those files you are having skipped aren't needed IMO, I just updated dashlaunch 2.04 manually afterwards.
If you are able to create an image and check it in 360 Flash Dump Tool, I have 29 files. Swat I found for both the BB and Falcon

wur2311 · « **Reply #59 on:** November 13, 2010, 03:09:00 AM »

another jasperBB updated fine here too (512) i havent done it before and it was almost foolproof, but my stupid firewall kept blocking efb from loading ibuild, so check that if you have any problems

Author Topic: Easy Gui Freebooter 12611 (Read 1036 times)