Print

[krizalid]

WARNING!

Recent discoveries lead us to the fact that this does not support FreeBoot nand images (*.bin).

Please, only use on Xell or XBR.

You may however download SMC_IO v0.2B which was released by Blackddr which has a similar interactive menu like this app, but will not inject to nand.

This is where you'll manually put the patched_smc file in /data/ as smc.bin and run ibuild to create new image. Or a Toolbox of choice.

Maybe, just maybe if I have a chance, I'll release v 0.3 of this tool that will make things a little easier for most.

-------------------------------------------------------------------------------------------------------------------------------------------

Here's a little app for you, sorry, right now I'm good at BATCH, and not soo good in the other stuff, but I'm working on it.

I'm sure FreeBoot Toolbox and other FreeBoot buidling tools wil support this in the future, but hey, I beat them to it and I release it here.

Enjoy!

UPDATE

QUOTE

* Updated code to simplify first options on SMC Patches Options
* Added More Options tab to modifify TMS and TDI as you like (DANGEROUS!)
* Reorganized files within folders to look less messy
* removed runtime file installer, not working properly for some ppl.
* added 2 more .dll files within runtime folder that are necessary as well.
* runtime files must be installed manually.
- copy all three files to C:\WINDOWS\System32\ and run the following command:
- "regsvr32 C:\WINDOWS\System32\[.dll filename]"
- as mentioned before, if this works well for you, you don't need to install these DLL.

QUOTE

--------------------------------------------------------------------------------------------------------------
- UPDATE MY SMC! v0.1 by Nknave/Krizalid
---------------------------------------------------------------------------------------------------------------

- Simple tools for simple ppl.

--------------------------------------------------------------------------------------------------------------
- what does it do?!
---------------------------------------------------------------------------------------------------------------

Well, this will use smc_io by Blackddr to patch the ports on smc of choice, than will use SBTool to encrypt
and update your nand file so you may flash back to console.

- Supports XBR and Xell only!
- Does not support Freeboot or M$ Official FS (that's a no brainer)

---------------------------------------------------------------------------------------------------------------
- What you will need before using this app!
---------------------------------------------------------------------------------------------------------------

You'll need Microsoft Visual C++ 2008 Redistributable Package (x86)

Download:

M$ Visual C++ 2008 Redist Package (x86)


MSVCP60D.DLL - Included in this package with batch installer as well.
(If it doesn't work for you, install manually to C:\WINDOWS\System32\)

*This file might not be necessary for you if the app runs well after installing
the runtime files from M$, I included it cause It didn't work for me for some reason
till I installed it after.



Patched SMC files (These can be obtained from free60's Xell Images).

All files are decrypted and are 12kb in size.
Please use the names as below or the app might fail to do it's job!
Make sure they are in the same working directory!!!

-zephyr.bin
-falcon.bin
-jasper.bin
-jasperbb.bin

* I also made a batch file to dump the smc's from xell images of free60.

Make sure they are in this same directory and with their original names aswell:

All files are 1,320kb.

-zephyr_hack_updxell.bin
-falcon_hack_updxell.bin
-jasper_6723_hack.bin
-jasper_6723_hack_for_256mb_512mb.bin


---------------------------------------------------------------------------------------------------------------
- Instructions!
---------------------------------------------------------------------------------------------------------------

Well, this is the easy part. Just follow onscreen instructions and you'll be done in no time hassle free.


--------------------------------------------------------------------------------------------------------------
- Credits!
---------------------------------------------------------------------------------------------------------------

- First of all to Blackddr and Happy_bunny for their time and effort into the SMC_IO tool
- Tiros for fixing the original code on the SMC
- I don't know who made SBTool, but credit's goes to him/her?
- So only 2% credit to me for building a small batch file to do the job for you! (IMG:style_emoticons/default/tongue.gif)

Absolutly no M$ Copyrighted files in this package.
DOWNLOAD APP v0.2

This post has been edited by krizalid: Jun 11 2010, 07:15 AM

[WarriorSan]

Thanks for your 2%..

[syntaxerror329]

Thanks, sounds good.

[SBEEZY]

just used this on my zephyr 8/10 boots successful. Soon i will try the aud_clamp point and see if that eliminates the problem


good work guys

[flipflip420]

I had problems with DUMP SMC FROM FREE60 XELL.exe.. It told me the a bunch of ***.dll and even when I had them installed it still had errors.

But I compile from source SBTool.exe and the app ran smoothly and its 120KB and yours was 104KB. Idk may want to try it if your having troubles also.

http://www.megaupload.com/?d=S9TYF7FD (virustotal check-up)

This post has been edited by flipflip420: Jun 4 2010, 07:46 AM

[Tattoojunky]

hello


and what can I do? my xenon has always E79. regardless of whether such flashed or cygnos.

[krizalid]

QUOTE(flipflip420 @ Jun 4 2010, 01:43 AM)

I had problems with DUMP SMC FROM FREE60 XELL.exe.. It told me the a bunch of ***.dll and even when I had them installed it still had errors.

But I compile from source SBTool.exe and the app ran smoothly and its 120KB and yours was 104KB. Idk may want to try it if your having troubles also.

http://www.megaupload.com/?d=S9TYF7FD (virustotal check-up)

Thanks, but your SBTool.exe is not working on my PC, acts like an installer not wanting to install, and CMD will not launch it either  

For now I have an update for v0.2 and will post it in a bit.

QUOTE(Tattoojunky @ Jun 4 2010, 03:34 AM)

hello
and what can I do? my xenon has always E79. regardless of whether such flashed or cygnos.

Sorry, but this SMC patch does not apply for Xenon, as far as we understand, Xenon should not be suffering E79.

Look here to see if this helps: http://xbox-experts....rcode/E79/1033/

[SBEEZY]

QUOTE(flipflip420 @ Jun 4 2010, 01:43 AM)

I had problems with DUMP SMC FROM FREE60 XELL.exe.. It told me the a bunch of ***.dll and even when I had them installed it still had errors.

But I compile from source SBTool.exe and the app ran smoothly and its 120KB and yours was 104KB. Idk may want to try it if your having troubles also.

http://www.megaupload.com/?d=S9TYF7FD (virustotal check-up)

did u restart the pc after adding the dll files?

[Drefsab]

QUOTE(SBEEZY @ Jun 4 2010, 03:53 AM)

just used this on my zephyr 8/10 boots successful. Soon i will try the aud_clamp point and see if that eliminates the problem
good work guys

Id be very intersted to see your results on that, I have a couple of Zephyr's that rrod on boot, I used a 330 resistor in place of the jumper wire that helps things but would love to get them booting 10 for 10 etc.

[RRODXbox]

Having problems with this.

I made a freeboot image for a Zephyr with FB toolbox then went to reconfigure the SMC with this and changed the rol spot to AUD_CLAMP, got E79 on boot so I know its changed the SMC, moved the wire and I dont get any dashboard booting but Xell will boot fine, just get a blank screen and no errors.  (IMG:style_emoticons/default/blink.gif)

Any ideas? its the 1st time I have tried this.

[Arbiter34]

*edit* mistaken post *edit

This post has been edited by Arbiter34: Jun 4 2010, 06:46 PM

[RRODXbox]

Nevermind, just used the other tool which turns out is much easier than this one.

[SBEEZY]

QUOTE(Drefsab @ Jun 4 2010, 09:29 AM)

Id be very intersted to see your results on that, I have a couple of Zephyr's that rrod on boot, I used a 330 resistor in place of the jumper wire that helps things but would love to get them booting 10 for 10 etc.

i want my zeph 10/10 too but being that its a modded console i know that they fritz every now and then its something i can live with because of the capabilities of the system ( i might jtag my xenon so i dont have to deal with e79 but i love my HDMI box)

what secondary errors do your zephs get?

This post has been edited by SBEEZY: Jun 4 2010, 08:21 PM

[saso]

can i extract cpu key with this amazing tool !!!

[Spegs12]

Great app! Just an FYI Jasper BBs and Jasper 16s use the same SMC and you can download package with all of the SMCs on #freeboot on efnet. Does this perform the bug fix as well?

This post has been edited by Spegs12: Jun 5 2010, 04:25 AM