Print

[dufc1983]

QUOTE(harshboy @ May 27 2010, 01:46 AM)

Doesn't seem to like my Xenon's original 7371 image or my XBR3 image. It will reach 35% and display a critical error. No idea why.

i had similar,try just selecting nand instead of hdd or usb,and try your orig dump and long as the launch.ini is on root of either device its fine,i had errors as i was selecting hdd,soon as i moved to nand it worked fine

This post has been edited by dufc1983: May 27 2010, 02:15 AM

[colt45joe]

could someone please explain to me what this option in the program means:


Dashlaunch 1.0 patches:
-Nand
-HDD
-USB


what does it all mean? which one do i choose?

[danthaman673]

QUOTE(colt45joe @ May 27 2010, 02:36 PM)

could someone please explain to me what this option in the program means:
Dashlaunch 1.0 patches:
-Nand
-HDD
-USB
what does it all mean? which one do i choose?

I believe it's where dashlaunch will look for the boot.ini (I forget what it's actually called but you get the idea)

[duey2k]

after i build the image and with the new version, flash360 exclaims "your current nand is not zeropairred"

i went ahead and flashed it and blank screen, xellous still works and i reflashed my nand backup and everything is working again but i would love to use dashboot...

any help...using A B A in flash360
xexon board, running freeboot .32 xellous 1.0

[Sp00nLude]

QUOTE(duey2k @ May 27 2010, 05:46 AM)

after i build the image and with the new version, flash360 exclaims "your current nand is not zeropairred"

i went ahead and flashed it and blank screen, xellous still works and i reflashed my nand backup and everything is working again but i would love to use dashboot...

any help...using A B A in flash360
xexon board, running freeboot .32 xellous 1.0

I got the same warning when I tried to flash using flash360.

I just ignored the warning and went ahead with the flash anyways. Seems fine, but would like to know what it meant.

[danked]

didn't work for me. The image build fine, no bad blocks or anything but after flashing freeboot the xbox wont boot to dash, so I re-flashed it with XBR3, I will just wait no need for me to update atm.

[antisniperspy]

QUOTE(danked @ May 27 2010, 12:23 PM)

didn't work for me. The image build fine, no bad blocks or anything but after flashing freeboot the xbox wont boot to dash, so I re-flashed it with XBR3, I will just wait no need for me to update atm.

What version is your xbox 360?

[bamarquez226]

Hey guys, is the compiled version after its done is about 66 mb? Should I use the original dump or the XBR dump of the NAND? I just want to double check first. Thanks.

[antisniperspy]

QUOTE(bamarquez226 @ May 27 2010, 12:56 PM)

Hey guys, is the compiled version after its done is about 66 mb? Should I use the original dump or the XBR dump of the NAND? I just want to double check first. Thanks.

Yes it is 66mb if you are using jasper bb or jasper sb and you should always use the original dump if you have it.

[danked]

QUOTE(antisniperspy @ May 27 2010, 11:47 AM)

What version is your xbox 360?

a Xenon, and I used my XBR3 dump cause the original didn't seem to work. at lest with toolbox 2.3

[bamarquez226]

QUOTE(antisniperspy @ May 27 2010, 10:01 AM)

Yes it is 66mb if you are using jasper bb or jasper sb and you should always use the original dump if you have it.

Cool, I'll try it tonite after work.

[antisniperspy]

QUOTE(danked @ May 27 2010, 02:28 PM)

a Xenon, and I used my XBR3 dump cause the original didn't seem to work. at lest with toolbox 2.3

I would try the original dump again if you have it.

[Dermy]

Does anyone know for sure what the create custom freeboot checkbox does?

[sudeki300]

QUOTE(Dermy @ May 27 2010, 08:36 PM)

Does anyone know for sure what the create custom freeboot checkbox does?

that is what i'm trying to find out. when the program is making a custom freeboot about halfway through it takes you to a temp folder with the ibuild.exe and bin folder and other stuff but i'm not sure what i supposed to do. it does not give you alot of time either...................sudeki300

[BobBorakovitz]

QUOTE(colt45joe @ May 27 2010, 06:06 AM)

could someone please explain to me what this option in the program means:
Dashlaunch 1.0 patches:
-Nand
-HDD
-USB
what does it all mean? which one do i choose?

It sucks without a readme, i know...i had to figure it out...

You have to download the Dash Launch 1.0 zip and find the launch.xex and launch.ini files.  those 3 options are places you could put those 2 files where freeboot will look for it.  I checked -USB and 'custom freeboot' and stuck those 2 files in the root of my usb0 and edited the launch.ini correctly and it works great!  now I can boot into FSD automatically and go back to FSD from a game automatically!  this works especially well for me because my dvd drive is going so it wouldn't boot the FSD launch disc for me every time.  If you want to go back to the NXE then you just hold RB when you boot or exit a game.

good luck!