Topic: Jtag Tool v1.70 (Read 276 times)

Xbox-Scene · « **on:** May 14, 2010, 04:34:00 PM »

Jtag Tool v1.70
Posted by XanTium | May 14 18:34 EST | News Category: Xbox360

(IMG:http://www.burstnet.com/cgi-bin/ads/ad9520b.cgi/ns/v=2.1S/sz=300x250A/

Coolshrimp released a new version of Jtag Tool - an all-in-one GUI installer to create and put freeBOOT 0.032 on your jtag'able 360.

Whats new/fixed:
* Advanced Options
* LPT Port Changer
* Convert XBReboot To Original Nand
* Repair Bad Nand
* Port95 Installer
* FreeBOOT Patch Selection

Official Site: http://tech-modz.net
Download: n/a (might contain copyrighted code) - if you use v1.60+, you should get a prompt to update next time you start the program.
News-Source: gueux-forum.net

modslave · « **Reply #1 on:** May 14, 2010, 04:49:00 PM »

I like the choice now for xbox 1 compatibility. But what changed from 1.70 to 1.71?

guerriero di pace · « **Reply #2 on:** May 14, 2010, 04:52:00 PM »

a quick update to 1.71!
bugfix?

dvbandit · « **Reply #3 on:** May 14, 2010, 06:45:00 PM »

hmms i seem to get an error on startup on 1.71

System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Jtag Tool 1.71\Version.txt'.
File name: 'C:\Program Files\Jtag Tool 1.71\Version.txt'

seems to work fine though if just continue

modslave · « **Reply #4 on:** May 15, 2010, 02:08:00 AM »

QUOTE(dvbandit @ May 15 2010, 01:45 AM)

hmms i seem to get an error on startup on 1.71

System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Jtag Tool 1.71\Version.txt'.
File name: 'C:\Program Files\Jtag Tool 1.71\Version.txt'

seems to work fine though if just continue

I have a txt file called "Version" which contains "1.71" and nothing else. See if you have that file in your Jtag Tool 1.71 folder and if not create it, worth a shot

royvedas · « **Reply #5 on:** May 15, 2010, 05:20:00 AM »

I need some help. I cannot get the program to run. I have XP and get an error code like this: "0xc0000135" the program could not initialize (roughly translated).

Can someone please help me?

royvedas · « **Reply #6 on:** May 15, 2010, 06:05:00 AM »

QUOTE(royvedas @ May 15 2010, 01:20 PM)

I need some help. I cannot get the program to run. I have XP and get an error code like this: "0xc0000135" the program could not initialize (roughly translated).

Can someone please help me?

Ahh I found out. I needed net framework.

ztinoezz · « **Reply #7 on:** May 15, 2010, 11:33:00 AM »

anyone having problems with installing xell for jaspers?
console not booting,flash back orriginal and all is ok...

federicozose · « **Reply #8 on:** May 15, 2010, 02:13:00 PM »

i try to use the new option "conver XBR to original" but i cant find the "clean nand.bin" or the "tech-mods jtag tool page" in the help options say "select clean image.bin (get it from tech-mods jtag tool page) but i cant find it, any help will be apressiated, thanks, federico

trent666 · « **Reply #9 on:** May 15, 2010, 10:52:00 PM »

just did my jasper with prior XBR3 and it all went smoothly but i checked system settings after it was complete and it still says 8955...

any ideas

modslave · « **Reply #10 on:** May 16, 2010, 02:25:00 PM »

I get;
System.IO.FileNotFoundException: Could not find file 'bin\Mem\jasper 256.bin'.
File name: 'bin\Mem\jasper 256.bin'

But also tried EasyFreeboot and BestPig's Toolbox and no joy with this Jasper...time to give manual a go

This post has been edited by modslave: May 16 2010, 09:56 PM

DeathGrind · « **Reply #11 on:** May 16, 2010, 05:57:00 PM »

hey everyone was looking for some advice. Can I use this program to flash freeboot 0.032 without having to open my xbox?

I have my original nand image and can get my CPU key from xell. I would like to use flash360 to flash freeboot from a usb hard drive, i just forgot how to use flash 360.

I take it I do all the steps in the help section of jtag tool v1.71, and after I have my freeboot image, I could use flash360 to write it to my xbox. I just need to know the steps to be taken after I get my freeboot image for use with flash360.

I've been putting this off for a while, but I would like to get this done. I just don't want to have to open my Xbox AGAIN.

Thanks

erak · « **Reply #12 on:** May 16, 2010, 06:33:00 PM »

I try to use the "Convert XBR To Original" function. But I need "a clean nand.bin" available at "Tech-Modz Jtag Tool Page". But I can't seem to find it anywhere.

krizalid · « **Reply #13 on:** May 16, 2010, 09:05:00 PM »

QUOTE(ztinoezz @ May 15 2010, 12:33 PM)

anyone having problems with installing xell for jaspers?
console not booting,flash back orriginal and all is ok...

I don't have a jasper to check this out, but i did notice that the xell images provided within are prebuilt and just 1 for jasper

He didn't bother to make one for Jaspers and another for JaspersBB.

Also, this app could save some space, instead of having 6mb extra where the 4 xell images are at.

You can just build your own Xell image using ibuild and donor files to the corresponding nand.

QUOTE

ibuild c XeLL -c [CONSOLE] -d data\ -b [1BLKEY] xellbig.bin

This will build a Xell file, but with the size of the full nand, than simply using nandpro:

QUOTE

nandpro xellbig.bin: -r2 xell_small.bin 0 50
del xellbing.bin

This will save lots of space, trust me.

sniffinpoprocks · « **Reply #14 on:** May 16, 2010, 10:49:00 PM »

QUOTE(dvbandit @ May 15 2010, 02:45 AM)

hmms i seem to get an error on startup on 1.71

System.IO.FileNotFoundException: Could not find file 'C:\Program Files\Jtag Tool 1.71\Version.txt'.
File name: 'C:\Program Files\Jtag Tool 1.71\Version.txt'

seems to work fine though if just continue

What OS was this with? I had same issue with win7 but no problem with XP.

Author Topic: Jtag Tool v1.70 (Read 276 times)