Print

[Xbox-Scene]

NandPro 2.0c *Update: 2.0d* Posted by XanTium | February 8 21:37 EST | News Category: Xbox360

A new version of NandPro(info) has been released, the original cmd-line tool that allows you to read/flash the Xbox360 NAND via LTP or USB: What's new/fixed: * Bit settling verify feature added for LPT reading * Add support for Jasper16a * Improved detection for virtual nand device, fixes some problems with writing to vnand. * Always corrects the ECC bytes (but not SPARE), even in raw mode ie: A raw file that has been hex edited can simply be flashed with -w * Added command line swithces %r will read SPARE data only, 16 bytes per block @w will write RAW file, while correcting block numbers Can "force" a flash config on command line by appending :HexFlashConfig *update* 2.0d has been released. What's new/fixed: * For compatibility purposes -w does not calculate ECC * Raw files are flashed pure using -w. To correct ECC errors use *w instead ie: A raw file that has been hex edited can simply be flashed with *w Official Site: By Tiros at free60.org (thx to WarriorSan for the news) Download: here

[BulletMag]

Cheers, just need X64 support now and i can get rid of my 32bit vista all together

[Redline99]

NandPro20c has been removed pending a small correction to be released soon.

(Dont use download link on main page until XanTium has had a chance to update.)

[Haruno]

QUOTE(BulletMag @ Feb 8 2010, 06:50 PM)

Cheers, just need X64 support now and i can get rid of my 32bit vista all together

http://nds.cmamod.co...ver_w32_x64.zip
and
http://forums.xbox-s...howtopic=698049

[keropi]

* Add support for Jasper16a

I wonder what the improvements are, because I already xbr'ed my 2 16a jaspers and are fine  (IMG:style_emoticons/default/smile.gif)

[niai]

same i have done 3 jasper16a all worked grate

[blipidy]

wish i saw this yesterday because i would have grabbed the 2.0b version, didn't see this until just now tho. but i ended up using the 2.0c version to dump my nand and uncripple the hdd on my falcon using win xp sp3. two identical dumps w/ no bad blocks. worked fine.

will hold off on using it to flash xbr to my jasper16  tho until new release just as a precaution

This post has been edited by blipidy: Feb 9 2010, 04:12 PM

[antibot]

Hi team,
can u please tell me, what is a jasper16a (a new release of motherbord?)
With this nand can i set a xbreboot on my console (if i already have a dash 7xxx)?

[fbane]

Version 2.0d has been released.

[sam3k]

any one have link to the new one?

edit:

NM here is a link

http://rapidshare.com/files/348385156/NandPro20d.rar

This post has been edited by sam3k: Feb 9 2010, 10:49 PM

[ddxcb]

and for the people who dont like rapids**t enjoy

NandPro20D.rar

Edit: Still using 20.b, the new one is confusing LOL.

This post has been edited by ddxcb: Feb 10 2010, 12:45 AM

[niai]

why is it confusing just use it the same as nandpro2.0b dont you?

[GOTitCUZiMODDED]

Just used it on 4x Jaser16a's and all good!  Thanks for the update and fix!  Much appreciated!  I'm gonna bank with these consoles so is there a donation link anywhere?  

[magnus__hydra]

I tried using nandpro D to flash the rawkv.binto  xbr and it get a "could not open Virtual  Nand Device File.XBR512.bin"

I use nandpro B and it works just fine... it there a different command when using the XBR? Read the rawkv.bin form the nand works fine with version D but not writing to xbr.

explame of what I mean.
nandpro newjasper64.bin: -r64 rawkv.bin 1 1
nandpro newjasper64.bin: -r64 rawconfig.bin EF7 2

works with verison B and D
But
nandpro XBR512.bin: -w64 rawkv.bin 1 1
nandpro XBR512.bin: -w64 rawconfig.bin EF7 2
give me  "could not open Virtual  Nand Device File.XBR512.bin" Using version D

Using version B it works fine...

[antibot]

Guys,
Please tell me. It is very important

QUOTE

Hi team,
can u please tell me, what is a jasper16a (a new release of motherbord?)
With this nand can i set a xbreboot on my console (if i already have a dash 7xxx)?