Topic: Fan Speed Patcher for 16mb NANDs (Read 469 times)

Xbox-Scene · « **on:** January 25, 2010, 11:32:00 AM »

Fan Speed Patcher for 16mb NANDs
Posted by XanTium | January 25 13:32 EST | News Category: Xbox360

(IMG:http://www.burstnet.com/cgi-bin/ads/ad9520b.cgi/ns/v=2.1S/sz=300x250A/

From the nfo/readme:

Quote

Patch Autospeed.xex and run it for 100% fan speed.

Edit1: added 80% and 90% only for 16MB NAND's.
Edit2: added 50,60,70% speed, only for 16MB NAND's

Official Site: n/a, by ddxcb
Download: here
News-Source: xboxhacker.org

tripkip · « **Reply #1 on:** January 25, 2010, 11:46:00 AM »

Why would someone want his, there is auto speed adjustment isn't it?

minus5252 · « **Reply #2 on:** January 25, 2010, 11:54:00 AM »

Does anyone know of a GOOD replacement fan, most likely not designed for the Xbox 360, that is QUIET and pushes a lot of air?

As for why this program is valuable, it allows users to protect their JTAG Xbox 360's by always maintaining as low a temperature as possible. This is to avoid RROD and other such Xbox 360 "ailments." Excellent app, lots of people will get a lot of use out of this!

Minus

Grim187 · « **Reply #3 on:** January 25, 2010, 12:04:00 PM »

QUOTE(tripkip @ Jan 25 2010, 10:46 AM)

there is auto speed adjustment isn't it?

yes there is, its inadequate, which is why we have 3 red lights.

ddxcb · « **Reply #4 on:** January 25, 2010, 12:07:00 PM »

LOL BTW I added 10,20,30,40% speed as well (IMG:style_emoticons/default/smile.gif)

psyco118 · « **Reply #5 on:** January 25, 2010, 12:08:00 PM »

QUOTE(tripkip @ Jan 25 2010, 06:46 PM)

Why would someone want his, there is auto speed adjustment isn't it? (IMG:style_emoticons/default/wink.gif)

this is to patch autospeed to run at 100% from the moment you turn the xbox on to when it goes off works very well keeps my xenon a lot cooler my temps where 90 anot there down between 50-60c

This post has been edited by psyco118: Jan 25 2010, 08:08 PM

Sunblood · « **Reply #6 on:** January 25, 2010, 12:23:00 PM »

Is there a way to modify the automatic speed control? Right now it doesn't really turn up the fans unless the 360 gets WAY too hot. If we could set it to increase fan speed at a lower threshold it would solve a lot of temp problems without too much noise.

This post has been edited by Sunblood: Jan 25 2010, 08:24 PM

evans05 · « **Reply #7 on:** January 25, 2010, 12:40:00 PM »

how would i go about applying this?

sabbath_dude · « **Reply #8 on:** January 25, 2010, 01:20:00 PM »

I used this the other day and the results were very good!....

Before - CPU:59.3C GPU:73.2C EDRAM:78.0C MB:35.0C - idle in XeXMenu config screen - Fans auto
After - CPU:48.9C GPU:54.0C EDRAM:59.7C MB:27.1C - idle in XeXMenu config screen - Fans 60%

arielzadi · « **Reply #9 on:** January 25, 2010, 01:34:00 PM »

how do i apply this patch on my xenon
and for sabath dude is your motherboar a falcon or a xenon
cuz i have a xenon and my so called normal temps are aroun 80 without playing a game

Aldanga · « **Reply #10 on:** January 25, 2010, 02:08:00 PM »

I'm getting a "failed to launch game" error with XexMenu on a patched 100% .xex. I tried the stock .xexes and they haven't worked either--as far as I can tell, at least.

Can someone point out my horrible ignorance? I'd be much appreciative.

sabbath_dude · « **Reply #11 on:** January 25, 2010, 02:12:00 PM »

QUOTE(arielzadi @ Jan 25 2010, 08:34 PM)

how do i apply this patch on my xenon
and for sabath dude is your motherboar a falcon or a xenon
cuz i have a xenon and my so called normal temps are aroun 80 without playing a game

To use this you need to download the old version of FanSpeedFlasher from the usual places. Then download ddxcb's patches and use Patcher.exe to patch FanSpeedFlasher.xex. For example I used the 60% patch file to patch autospeed.xex. I then ran autospeed.xex from XeXMenu and reboot my console. The fans now run at 60% at all times.

The temps I posted are from my Falcon.

Haygar · « **Reply #12 on:** January 25, 2010, 02:47:00 PM »

I stumbled on to this the other day and found it also works on my jasper BB as well on all the speeds.

A increased threshold speed on the auto speed would be great if possible.

Thanks heaps (IMG:style_emoticons/default/beerchug.gif) ddxcb

This post has been edited by Haygar: Jan 25 2010, 10:48 PM

arielzadi · « **Reply #13 on:** January 25, 2010, 02:48:00 PM »

well it dosent work for me
patched autospeed.xex with the apply option in the patcher to full speed(100)
tried to load it with xex menu
and then it told me the game could not be started
tried to reboot to see if it maybe worked but no change fans are still not running in 100%
any help?

Haygar · « **Reply #14 on:** January 25, 2010, 02:54:00 PM »

QUOTE(Aldanga @ Jan 26 2010, 08:08 AM)

I'm getting a "failed to launch game" error with XexMenu on a patched 100% .xex. I tried the stock .xexes and they haven't worked either--as far as I can tell, at least.

Can someone point out my horrible ignorance? I'd be much appreciative. (IMG:style_emoticons/default/smile.gif)

This might help some..... http://forums.xbox-scene.com/index.php?sho...02928&st=30

This post has been edited by Haygar: Jan 25 2010, 10:54 PM

Author Topic: Fan Speed Patcher for 16mb NANDs (Read 469 times)