Print

[niai]

i am liking the gui

but still i think it would be better to ask for a nand dump name instead of the serial

[syntaxerror329]

QUOTE(PleXo @ Jan 26 2010, 07:14 PM)

thoughts?

This is eactly what we need.
Is there any way to include the fan speed hack in the process?

[PleXo]

will look into it syntax... i am wanting to remove the need for nandpro as much as possible, ive been able to so far open the dump get CB version and dump the keyvault from the full dump and spew it out into a text file as hex, i can also read it from the full dump and write keyvault.bin but its painfully slow for only 17kb so looking into a faster method i am simple doing fs.writebyte(bytehere) 1 by 1 as it reads it.. seems to slow it down a lot..


thesmj, i think you are using v0.2 now instead of v0.1 ? if so there is an added check to see if cb.bin was created (because of the cb detection now ) i would recommend going back to v0.1 and trying again, or remove the cb.bin check

[PleXo]

been up all night and only got this done...



got it opening up a full nand dump, reading cb version dumping keyvault from it and writing it as a keyvault.bin (reading/writing 17kb seems to go very slow, using ReadByte and WriteByte with filestream if anyone knows a better way which there obviously is!! perhaps some sort of buffering?, anyway i also got the board revision detection working using ONLY the CB version, ended up having to make a new if statement for each cb version for some reason, couldnt do if 5770 or 4760 then console is a falcon etc not sure why ? still learning vb.net bit different from vb6..., anyways thats all ive got done so far .. keep you all posted

[AlkaliV2]

Awesome program.  Just wanted to mention I like where this project is going and it will stream line this project exponentially.  Thanks!

[rami1]

QUOTE(belenos @ Jan 26 2010, 10:54 PM)

well there forum is saying its not usable with nandpro. but i got another guy saying he uses his with it so I guess I'll wait and see.

[evans05]

im liking the look of the gui, keep up the good work

[PleXo]

simply hit Detect Xbox 360 and it will fill the blanks in for you

[philbee]

this looks really good, looking forward to a release when ready.

[betopr]

Does this application works with infectus 2 chip with or without Infectus.dll too or is this only for Olimex?

[MicroShack]

Looking good and will come in handy when doing alot.

Well done keep up the good work

[PleXo]

QUOTE(betopr @ Feb 2 2010, 12:42 AM)

Does this application works with infectus 2 chip with or without Infectus.dll too or is this only for Olimex?

uses nandpro its olimex only (works with LPT too)

[Spegs12]

I edited it to inject Xellous when it injects the kv.bin and config.bin into the xbr.bin with:

CODE

nandpro\nandpro.exe xbr.bin: +W16 xell-2f.bin 30 >nul

Remember you have to put xell-2f.bin into the root folder.

This post has been edited by Spegs12: Feb 5 2010, 06:14 AM

[PleXo]

QUOTE(Spegs12 @ Feb 5 2010, 04:35 AM)

I edited it to inject Xellous when it injects the kv.bin and config.bin into the xbr.bin with:

CODE

nandpro\nandpro.exe xbr.bin: +W16 xell-2f.bin 30 >nul

Remember you have to put xell-2f.bin into the nandpro folder.

xell-2f.bin needs to be in the ROOT dir the way you have made that .. if you change it to firmwares\xell-2f.bin then you can put it into firmwares folder along with the xbr images...

incorporating xellous into magicflasher also.. beta version will be up soon hopefully

[Spegs12]

Woops... Meant to say root. But, I like the idea of it being in firmwares. So:

CODE

nandpro\nandpro.exe xbr.bin: +W16 firmwares\xell-2f.bin 30 >nul

This post has been edited by Spegs12: Feb 5 2010, 06:19 AM