Print

[bobsupercow]

I have a 512 Nand with 3 bad blocks. Just wondering how to manually remap them in my XBR.bin? Degraded doesn't support 512 NANDs. I don't know how to find out where it remapped the bad blocks to in my original Nand, so I don't know where to remap them in XBR? Ideas?

[DuggyUK]

worked great for me too, qould thank him but XH is dead

[horror]

umm rasta man, was that sarcasm?,, did it really "work" if you got an error after it was done?

[horror]

In degraded I get ---------- Note: BadBlock 0x230 found at 0x3ff

 in bad block mover I get ------------  Found Block ID 0x0230 at offset  0x0107BE00


 Are these supposed to be different numbers after each 0x230?

[hazed69]

im trying to use this tool but windows dont let me open it
says "componet COMDLG32.OCX or one of its depencies not correctly
registerd: a file missing or invalid


??

[jayboy86]

yea i have the same problem trying to use it under windows vista

any alternative downloads?

dont worry, found a guide to solve the problem

http://windowsxp.mvps.org/comdlg32.htm

This post has been edited by jayboy86: Jan 9 2010, 04:28 PM

[junior2k8]

hey guys need some help here - tried all day yesterday to get this ish to work.  first with xbreboot 8955_3 tried it many times tried patching my kv and raw config to the file tried just patching kv and i've also just programmed xbreboot rawkv and rawconfig individually but still a NO GO - It will boot my dashboard but never would it boot to xbr or xell for that matter -  I checked dash board and it wrote fine as i was on dash 8955 so i went back to xbins and got the xbr_1 (btw i'm using a xenon mobo)  wrote all 3 files individually (xbr.bin - kv.bin and config.bin ) booted it up and it worked - well partially it will still boot the dash board and also would boot xell but xell would freeze at the bottom (it says "Your cpu key is xxxxxx - and your dvd key is xxxxxxx - )  and would never go any further .  I'm not a noob at all when it comes to stuff like this .  All my connections are good i've checked my dumped bin file with flashtool  no problems and i've also used bad block remapper - which says there are no errors in my backup dump but does find 1 bad block in xbr.bin (original)  and remaps it  but still nogo  - also xell tells me i should try installing by cdrom .  i have pics if needed I will post up. Right now i'm writting back my original nand1.bin to see if it puts me back on the 7xxx dash

This post has been edited by junior2k8: Jan 16 2010, 02:50 PM

[junior2k8]

  this is as far as xell will boot using the 8955_1 (8955_3  never boots up to xell will just sit there with a black screen but does boots dashboard)



this pic is xell showing my fusesets and giving a dvd error


this pic is after all the frustration i flashed my original nand1.bin back to 360  shows i am back on 7xxx dash which tells me that i'm doing the right steps but for the life of me can not get this thing to boot past xell and can not get 8955_3 to boot to xell at all

[junior2k8]

could someone remove my above post it wont let me?

[kiwimods]

QUOTE(hazed69 @ Jan 4 2010, 04:27 AM)

im trying to use this tool but windows dont let me open it
says "componet COMDLG32.OCX or one of its depencies not correctly
registerd: a file missing or invalid
??

you need to type  COMDLG32.OCX into google and you will find the file, download it and instal to system32 folder then run it from start menu somehow, i found the tutorial here and the file actually,

http://windowsxp.mvps.org/comdlg32.htm

[dokworm]

QUOTE(junior2k8 @ Jan 16 2010, 02:48 PM)

hey guys need some help here - tried all day yesterday to get this ish to work.  first with xbreboot 8955_3 tried it many times tried patching my kv and raw config to the file tried just patching kv and i've also just programmed xbreboot rawkv and rawconfig individually but still a NO GO - It will boot my dashboard but never would it boot to xbr or xell for that matter -  I checked dash board and it wrote fine as i was on dash 8955 so i went back to xbins and got the xbr_1 (btw i'm using a xenon mobo)  wrote all 3 files individually (xbr.bin - kv.bin and config.bin ) booted it up and it worked - well partially it will still boot the dash board and also would boot xell but xell would freeze at the bottom (it says "Your cpu key is xxxxxx - and your dvd key is xxxxxxx - )  and would never go any further .  I'm not a noob at all when it comes to stuff like this .  All my connections are good i've checked my dumped bin file with flashtool  no problems and i've also used bad block remapper - which says there are no errors in my backup dump but does find 1 bad block in xbr.bin (original)  and remaps it  but still nogo  - also xell tells me i should try installing by cdrom .  i have pics if needed I will post up. Right now i'm writting back my original nand1.bin to see if it puts me back on the 7xxx dash

 Do you have anything plugged into any of thr usb ports?

[MODMANMIKE]

Great app. i was pulling my hair out on my xenon , i kept getting error 71 had a bad block remapped it and sweet