Print

[Xbox-Scene]

FindSecData v0.61 Posted by XanTium | December 1 20:26 EST | News Category: Xbox360

boby2pc released a new version of FindSecData, a tool to help you uncripple the HDD features on a banned Xbox 360 console. FindSecData will extract secdata.bin and filetable of NAND dump. It uses patch-latest secdata.bin method (not delete method). What's new/fixed (since v0.4): * added bypassing FF version records in filesystem (v0.41) * more accurate timestamp - used for visual purposes only (v0.41) * added parameter to show time part of timestamp in filetables (v0.42) * added support for large blocks (v0.5) * block rellocation support (v0.6) * now for 256MB and 512MB Jaspers is only needed dump of 0x600 blocks:                 nandpro lpt: -r256 raw.bin AE0 600            or   nandpro lpt: -r512 raw.bin AE0 600            so only about 1h dumping (v0.6) * protection to use large block controller with small 24MB dump (v0.61) Official Site: n/a, by boby2pc on XBH Download: here

[AtlantaMods]

HotKnife420

• Archived User
• Hero Member
• 
• Posts: 1040

FindSecData v0.61

So let's see.... a new freeboot that works with newer kernels, a rebooter that eliminates the need for a 2nd nand, two ways to dump both of the newer liteon drives, and a subpoena for Gates...

 What a week for MS (and it's only Tuesday). I'm sure LT will be out before the end of the week just to put the nail in the coffin.  

DemisesAngel

• Archived User
• Full Member
• 
• Posts: 210

FindSecData v0.61

QUOTE(HotKnife420 @ Dec 1 2009, 10:09 PM)

So let's see.... a new freeboot that works with newer kernels, a rebooter that eliminates the need for a 2nd nand, two ways to dump both of the newer liteon drives, and a subpoena for Gates...

 What a week for MS (and it's only Tuesday). I'm sure LT will be out before the end of the week just to put the nail in the coffin.  

Just to add, if it were possible to remove ping limit. That'd be a sure fire way to get M$ pissed.

golteef

• Archived User
• Newbie
• 
• Posts: 12

FindSecData v0.61

Just tried this with my 512mb nand (which shows up as 528mb?) gives me options to try then open nandpro start to write and nandpro crashes, gives windows error report then I click on exit instead of send and then cmd goes back to C:\ without closing. Don't know if this is flashing it or what. I tried it with and without the switching diode on the mobo and checked all connection. Any ideas anyone?

onlyXMan

• Archived User
• Jr. Member
• 
• Posts: 67

FindSecData v0.61

QUOTE(golteef @ Dec 2 2009, 06:03 AM)

Just tried this with my 512mb nand (which shows up as 528mb?) gives me options to try then open nandpro start to write and nandpro crashes, gives windows error report then I click on exit instead of send and then cmd goes back to C:\ without closing. Don't know if this is flashing it or what. I tried it with and without the switching diode on the mobo and checked all connection. Any ideas anyone?

give us findsecdata log, commands used to dump, and to patch, crash screenshot

golteef

• Archived User
• Newbie
• 
• Posts: 12

FindSecData v0.61

QUOTE(onlyXMan @ Dec 2 2009, 02:12 PM)

give us findsecdata log, commands used to dump, and to patch, crash screenshot

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 3
Last filetable change: 0x60
ECC change: 0x60 Filetbl: 0x0EB7 Secdata: 0x03D6 Timestamp: 3B6D018E 2009-11-13
12:12:28 AM
ECC change: 0x5F Filetbl: 0x0EAE Secdata: 0x039D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x5C Filetbl: 0x0E71 Secdata: 0x007D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x5A Filetbl: 0x0B65 Secdata: 0x007D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x59 Filetbl: 0x0B4C Secdata: 0x03F6 Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x53 Filetbl: 0x0ECF Secdata: 0x03EE Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x52 Filetbl: 0x0EC6 Secdata: 0x0232 Timestamp: 3B37A04E 2009-09-23
8:02:28 PM

Checking secdata:

Searching for recommended

Extracting secdata:
secdata03D6.bin
secdata039D.bin
secdata007D.bin
secdata007D.bin
secdata03F6.bin
secdata03EE.bin
secdata0232.bin

Extracting filetables:
filetable0EB7.bin
filetable0EAE.bin
filetable0E71.bin
filetable0B65.bin
filetable0B4C.bin
filetable0ECF.bin
filetable0EC6.bin

Creating patched secdata:
Patchedsecdata03D6.bin
Patchedsecdata039D.bin
Patchedsecdata007D.bin
Patchedsecdata007D.bin
Patchedsecdata03F6.bin
Patchedsecdata03EE.bin
Patchedsecdata0232.bin

Creating patched filetables:
Patchedfiletable0EB7By0EAE.bin
Patchedfiletable0EB7By0E71.bin
Patchedfiletable0EB7By0B65.bin
Patchedfiletable0EB7By0B4C.bin
Patchedfiletable0EB7By0ECF.bin
Patchedfiletable0EB7By0EC6.bin

Use:
nandpro.exe lpt: -w512 Patchedsecdata039D.bin EB6 1
nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

will post screen shot of crash after I get home from work.
Basically the cmd window never closes, it looks like its working for bout 20 seconds then the error report screen comes up saying that nandpro encountered a problem and needs to close, I click exit instead of send and the message closes but cmd stays running and the command displayed is,

C:\>nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

C:\
C:\

onlyXMan

• Archived User
• Jr. Member
• 
• Posts: 67

FindSecData v0.61

QUOTE(golteef @ Dec 2 2009, 02:41 PM)

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 3
Last filetable change: 0x60
ECC change: 0x60 Filetbl: 0x0EB7 Secdata: 0x03D6 Timestamp: 3B6D018E 2009-11-13
12:12:28 AM
ECC change: 0x5F Filetbl: 0x0EAE Secdata: 0x039D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
Use:
nandpro.exe lpt: -w512 Patchedsecdata039D.bin EB6 1
nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

will post screen shot of crash after I get home from work.
Basically the cmd window never closes, it looks like its working for bout 20 seconds then the error report screen comes up saying that nandpro encountered a problem and needs to close, I click exit instead of send and the message closes but cmd stays running and the command displayed is,

C:\>nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

C:\
C:\

looks like the patch is prepared properly.
try to read that block before you write anything, because it looks like there is no connection:
nandpro.exe lpt: -r512 sec.bin EB6 1

This post has been edited by onlyXMan: Dec 2 2009, 02:57 PM

golteef

• Archived User
• Newbie
• 
• Posts: 12

FindSecData v0.61

QUOTE(onlyXMan @ Dec 2 2009, 02:56 PM)

looks like the patch is prepared properly.
try to read that block before you write anything, because it looks like there is no connection:
nandpro.exe lpt: -r512 sec.bin EB6 1

OK I tried reading EB6 and it reads perfectly, it's almost though it's write protected. I took screens of the attempts with notes.

(IMG:http://i996.photobucket.com/albums/af90/X-S_goltoof/Nandpro512ErrorScreen-1.jpg)

(IMG:http://i996.photobucket.com/albums/af90/X-S_goltoof/Nandpro512ErrorScreen-2.jpg)

(IMG:http://i996.photobucket.com/albums/af90/X-S_goltoof/Nandpro512ErrorScreen-3.jpg)

I can dump this nand no problem with no errors. but no write.  (IMG:style_emoticons/default/grr.gif)

Also, is the 512mb dump supposed to be 528mb (540,672kb) in size?

This post has been edited by golteef: Dec 3 2009, 03:12 AM

onlyXMan

• Archived User
• Jr. Member
• 
• Posts: 67

FindSecData v0.61

QUOTE(golteef @ Dec 3 2009, 02:53 AM)

OK I tried reading EB6 and it reads perfectly, it's almost though it's write protected. I took screens of the attempts with notes.







I can dump this nand no problem with no errors. but no write.  

Also, is the 512mb dump supposed to be 528mb (540,672kb) in size?

It look like it's nandpro problem. Do you use v2.0b ?

nandpro 2.0b

golteef

• Archived User
• Newbie
• 
• Posts: 12

FindSecData v0.61

QUOTE(onlyXMan @ Dec 3 2009, 07:45 AM)

It look like it's nandpro problem. Do you use v2.0b ?

nandpro 2.0b

Not as far as  I know, I am using what was linked in the 1st page of the tutorial. The zip just says nandpro so I'll try this and repost after work.

Thanks OnlyXman

golteef

• Archived User
• Newbie
• 
• Posts: 12

FindSecData v0.61

QUOTE(golteef @ Dec 3 2009, 02:42 PM)

Not as far as  I know, I am using what was linked in the 1st page of the tutorial. The zip just says nandpro so I'll try this and repost after work.

Thanks OnlyXman

Couldn't wait till after work so I gave it a shot and it worked! thanks onlyXman turns out the nandpro i was using didn't have large block support and it went thru without a hitch. patched it up and flashed her and now I can install games again!

 

parker955

• Archived User
• Jr. Member
• 
• Posts: 63

FindSecData v0.61

This program works great. I used it to get my xbox to install games again. Thanks for posting this

xbones

• Archived User
• Newbie
• 
• Posts: 36

FindSecData v0.61

Do I need any special hardware to use this program?  I've been reading about having to make serial cables, usb cables, or just simply plugging in a network cable.

How do I get FindSecData v0.61 to see my xbox 360?


Thank you.

syntaxerror329

• Archived User
• Hero Member
• 
• Posts: 1138

FindSecData v0.61

I just used this program to do my first uncrippling ever. It was too easy.

And i did a Jasper 256MB for my first one. Thank god i bought a olimex USB adapter.

Thanks

• Print

Pages: [1] 2

« previous next »

• xboxscene.org forums >
• Xbox360 Forums >
• Xbox360 Software Forums >
• PC Tools and Utilities (Xbox 360 related) >
• FindSecData v0.61

 

• SMF 2.0.19 | SMF © 2021, Simple Machines

[HotKnife420]

So let's see.... a new freeboot that works with newer kernels, a rebooter that eliminates the need for a 2nd nand, two ways to dump both of the newer liteon drives, and a subpoena for Gates...

 What a week for MS (and it's only Tuesday). I'm sure LT will be out before the end of the week just to put the nail in the coffin.  

[DemisesAngel]

QUOTE(HotKnife420 @ Dec 1 2009, 10:09 PM)

So let's see.... a new freeboot that works with newer kernels, a rebooter that eliminates the need for a 2nd nand, two ways to dump both of the newer liteon drives, and a subpoena for Gates...

 What a week for MS (and it's only Tuesday). I'm sure LT will be out before the end of the week just to put the nail in the coffin.  

Just to add, if it were possible to remove ping limit. That'd be a sure fire way to get M$ pissed.

[golteef]

Just tried this with my 512mb nand (which shows up as 528mb?) gives me options to try then open nandpro start to write and nandpro crashes, gives windows error report then I click on exit instead of send and then cmd goes back to C:\ without closing. Don't know if this is flashing it or what. I tried it with and without the switching diode on the mobo and checked all connection. Any ideas anyone?

[onlyXMan]

QUOTE(golteef @ Dec 2 2009, 06:03 AM)

Just tried this with my 512mb nand (which shows up as 528mb?) gives me options to try then open nandpro start to write and nandpro crashes, gives windows error report then I click on exit instead of send and then cmd goes back to C:\ without closing. Don't know if this is flashing it or what. I tried it with and without the switching diode on the mobo and checked all connection. Any ideas anyone?

give us findsecdata log, commands used to dump, and to patch, crash screenshot

[golteef]

QUOTE(onlyXMan @ Dec 2 2009, 02:12 PM)

give us findsecdata log, commands used to dump, and to patch, crash screenshot

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 3
Last filetable change: 0x60
ECC change: 0x60 Filetbl: 0x0EB7 Secdata: 0x03D6 Timestamp: 3B6D018E 2009-11-13
12:12:28 AM
ECC change: 0x5F Filetbl: 0x0EAE Secdata: 0x039D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x5C Filetbl: 0x0E71 Secdata: 0x007D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x5A Filetbl: 0x0B65 Secdata: 0x007D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x59 Filetbl: 0x0B4C Secdata: 0x03F6 Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x53 Filetbl: 0x0ECF Secdata: 0x03EE Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
ECC change: 0x52 Filetbl: 0x0EC6 Secdata: 0x0232 Timestamp: 3B37A04E 2009-09-23
8:02:28 PM

Checking secdata:

Searching for recommended

Extracting secdata:
secdata03D6.bin
secdata039D.bin
secdata007D.bin
secdata007D.bin
secdata03F6.bin
secdata03EE.bin
secdata0232.bin

Extracting filetables:
filetable0EB7.bin
filetable0EAE.bin
filetable0E71.bin
filetable0B65.bin
filetable0B4C.bin
filetable0ECF.bin
filetable0EC6.bin

Creating patched secdata:
Patchedsecdata03D6.bin
Patchedsecdata039D.bin
Patchedsecdata007D.bin
Patchedsecdata007D.bin
Patchedsecdata03F6.bin
Patchedsecdata03EE.bin
Patchedsecdata0232.bin

Creating patched filetables:
Patchedfiletable0EB7By0EAE.bin
Patchedfiletable0EB7By0E71.bin
Patchedfiletable0EB7By0B65.bin
Patchedfiletable0EB7By0B4C.bin
Patchedfiletable0EB7By0ECF.bin
Patchedfiletable0EB7By0EC6.bin

Use:
nandpro.exe lpt: -w512 Patchedsecdata039D.bin EB6 1
nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

will post screen shot of crash after I get home from work.
Basically the cmd window never closes, it looks like its working for bout 20 seconds then the error report screen comes up saying that nandpro encountered a problem and needs to close, I click exit instead of send and the message closes but cmd stays running and the command displayed is,

C:\>nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

C:\
C:\

[onlyXMan]

QUOTE(golteef @ Dec 2 2009, 02:41 PM)

findsecdata v0.61 2009-12-01 by boby2pc
Controller version 3
Last filetable change: 0x60
ECC change: 0x60 Filetbl: 0x0EB7 Secdata: 0x03D6 Timestamp: 3B6D018E 2009-11-13
12:12:28 AM
ECC change: 0x5F Filetbl: 0x0EAE Secdata: 0x039D Timestamp: 3B5D0AD9 2009-10-29
1:22:50 AM
Use:
nandpro.exe lpt: -w512 Patchedsecdata039D.bin EB6 1
nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

will post screen shot of crash after I get home from work.
Basically the cmd window never closes, it looks like its working for bout 20 seconds then the error report screen comes up saying that nandpro encountered a problem and needs to close, I click exit instead of send and the message closes but cmd stays running and the command displayed is,

C:\>nandpro.exe lpt: -w512 Patchedfiletable0EB7By0EAE.bin EB7 1

C:\
C:\

looks like the patch is prepared properly.
try to read that block before you write anything, because it looks like there is no connection:
nandpro.exe lpt: -r512 sec.bin EB6 1

This post has been edited by onlyXMan: Dec 2 2009, 02:57 PM

[golteef]

QUOTE(onlyXMan @ Dec 2 2009, 02:56 PM)

looks like the patch is prepared properly.
try to read that block before you write anything, because it looks like there is no connection:
nandpro.exe lpt: -r512 sec.bin EB6 1

OK I tried reading EB6 and it reads perfectly, it's almost though it's write protected. I took screens of the attempts with notes.

(IMG:http://i996.photobucket.com/albums/af90/X-S_goltoof/Nandpro512ErrorScreen-1.jpg)

(IMG:http://i996.photobucket.com/albums/af90/X-S_goltoof/Nandpro512ErrorScreen-2.jpg)

(IMG:http://i996.photobucket.com/albums/af90/X-S_goltoof/Nandpro512ErrorScreen-3.jpg)

I can dump this nand no problem with no errors. but no write.  (IMG:style_emoticons/default/grr.gif)

Also, is the 512mb dump supposed to be 528mb (540,672kb) in size?

This post has been edited by golteef: Dec 3 2009, 03:12 AM

[onlyXMan]

QUOTE(golteef @ Dec 3 2009, 02:53 AM)

OK I tried reading EB6 and it reads perfectly, it's almost though it's write protected. I took screens of the attempts with notes.







I can dump this nand no problem with no errors. but no write.  

Also, is the 512mb dump supposed to be 528mb (540,672kb) in size?

It look like it's nandpro problem. Do you use v2.0b ?

nandpro 2.0b

[golteef]

QUOTE(onlyXMan @ Dec 3 2009, 07:45 AM)

It look like it's nandpro problem. Do you use v2.0b ?

nandpro 2.0b

Not as far as  I know, I am using what was linked in the 1st page of the tutorial. The zip just says nandpro so I'll try this and repost after work.

Thanks OnlyXman

[golteef]

QUOTE(golteef @ Dec 3 2009, 02:42 PM)

Not as far as  I know, I am using what was linked in the 1st page of the tutorial. The zip just says nandpro so I'll try this and repost after work.

Thanks OnlyXman

Couldn't wait till after work so I gave it a shot and it worked! thanks onlyXman turns out the nandpro i was using didn't have large block support and it went thru without a hitch. patched it up and flashed her and now I can install games again!

 

[parker955]

This program works great. I used it to get my xbox to install games again. Thanks for posting this

[xbones]

Do I need any special hardware to use this program?  I've been reading about having to make serial cables, usb cables, or just simply plugging in a network cable.

How do I get FindSecData v0.61 to see my xbox 360?


Thank you.

[syntaxerror329]

I just used this program to do my first uncrippling ever. It was too easy.

And i did a Jasper 256MB for my first one. Thank god i bought a olimex USB adapter.

Thanks