Topic: Jungle Flasher V0.1.67 beta (50) (Read 280 times)

that360guy · « **Reply #15 on:** October 31, 2009, 08:35:00 AM »

Good Stuff! Now just waiting for a nice new Lite-on file to put in there!

noobcube · « **Reply #16 on:** October 31, 2009, 09:01:00 AM »

Good news

I already flashed my BenQ with iXtreme 1.61 using 1.66 too, and it works fine, not sure what the 'bug' that they fixed with it is - probably just the autoload.

bigt89 · « **Reply #17 on:** October 31, 2009, 09:24:00 AM »

It bricked my benq.
Crash on Verifying the write.

mat1c · « **Reply #18 on:** October 31, 2009, 09:30:00 AM »

QUOTE(bigt89 @ Oct 31 2009, 04:24 PM)

It bricked my benq.
Crash on Verifying the write.

so use dosflash, erase bad firmware and flash stock/custom fw again..

bigt89 · « **Reply #19 on:** October 31, 2009, 09:58:00 AM »

QUOTE(mat1c @ Oct 31 2009, 04:30 PM)

so use dosflash, erase bad firmware and flash stock/custom fw again..

No it got bricked entirely.
Cant detect erase etc. tried for 5 hours to get it back alive.
Its really bricked.
Tried everything including iprep. no joy.

AWD Bus · « **Reply #20 on:** October 31, 2009, 10:06:00 AM »

As long as you still have the key your golden tho. Benqs are cheap on ebay.

bigt89 · « **Reply #21 on:** October 31, 2009, 10:10:00 AM »

QUOTE(AWD Bus @ Oct 31 2009, 05:06 PM)

As long as you still have the key your golden tho. Benqs are cheap on ebay.

I have the original firmware. the key is in there right.
( i ordered a new one already

)

♠ace-of-spades♠ · « **Reply #22 on:** October 31, 2009, 10:56:00 AM »

QUOTE(amak1131 @ Oct 31 2009, 03:25 AM)

Sorry, but ace-of-spades you are wrong. Jungleflasher runs fine under x64 Windows 7. PortIO (a seperate x86 driver) won't work, however.

which makes me right, not wrong.

The point of the program jungle flasher is to flash 360's...and can it do it on a 64-bit pc, No.
So it doesn't work on 64-bit. I dont care if it loads, whoop-dee-frickin-doo.
If it can't do its job, it dosn't work.

Ranger72 · « **Reply #23 on:** October 31, 2009, 11:19:00 AM »

QUOTE(bigt89 @ Oct 31 2009, 11:58 AM)

No it got bricked entirely.
Cant detect erase etc. tried for 5 hours to get it back alive.
Its really bricked.
Tried everything including iprep. no joy.

I have seen so many benq, and liteons that people have claimed to be bricked and always able to bring it back in dos.

Rickets06 · « **Reply #24 on:** October 31, 2009, 12:39:00 PM »

Ranger72, is there a tut on how to do that in case it happens to one of us?
I was under the impression that dosflash 64 was fine with windows 7 64 and i successfully flashed to 1.6 about a week ago, (FINALLY)

This post has been edited by Rickets06: Oct 31 2009, 07:39 PM

Martinchris23 · « **Reply #25 on:** October 31, 2009, 01:42:00 PM »

Unless you physically damage the hardware, it's extremely difficult to brick the Samsung, Benq or Lite-on drives. at worst, the drive will be without firmware (which is what you do when you erase it), so just click on Vendor Intro and power cycle the drive. If your PC is freezing when you switch on the drive, you've got conflicting drivers trying to take control within Windows.

bigt89 · « **Reply #26 on:** October 31, 2009, 02:32:00 PM »

QUOTE(Martinchris23 @ Oct 31 2009, 08:42 PM)

Unless you physically damage the hardware, it's extremely difficult to brick the Samsung, Benq or Lite-on drives. at worst, the drive will be without firmware (which is what you do when you erase it), so just click on Vendor Intro and power cycle the drive. If your PC is freezing when you switch on the drive, you've got conflicting drivers trying to take control within Windows.

Well i tried all that erase etc. it didnt work some guy helped me on irc trough all the steps and he also said it was bricked.

I guess i hit the 1 in a million "bad luck".

newboxflash · « **Reply #27 on:** October 31, 2009, 02:47:00 PM »

QUOTE(bigt89 @ Oct 31 2009, 08:32 PM)

Well i tried all that erase etc. it didnt work some guy helped me on irc trough all the steps and he also said it was bricked.

I guess i hit the 1 in a million "bad luck".

have you tried intro device and powering it on/off a few times ?? not just the once

i had a really stubun benq a few weeks back brand spanky and it would go into vendor mode till i did that

bigt89 · « **Reply #28 on:** October 31, 2009, 02:52:00 PM »

QUOTE(newboxflash @ Oct 31 2009, 09:47 PM)

have you tried intro device and powering it on/off a few times ?? not just the once

i had a really stubun benq a few weeks back brand spanky and it would go into vendor mode till i did that

Yep tried cycling power like 50 times. i gave up after working at it for like 5 hours.
I just ordered a new one that should be here soon.

( looking for a good tut on howto replace a benq with a benq)

KarlosB · « **Reply #29 on:** October 31, 2009, 06:03:00 PM »

QUOTE(bigt89 @ Oct 31 2009, 10:52 PM)

Yep tried cycling power like 50 times. i gave up after working at it for like 5 hours.
I just ordered a new one that should be here soon.

( looking for a good tut on howto replace a benq with a benq)

flash new benq with your old key in new firmware (1.61) - job done.

Author Topic: Jungle Flasher V0.1.67 beta (50) (Read 280 times)