Topic: HDDHackr v1.22 Build 20091022 (Read 1091 times)

Constellation · « **Reply #135 on:** November 18, 2009, 11:48:00 AM »

One question. I previously flashed a 250GB WD hard drive with the 120 GB hdss.bin. This was before the 250GB hdss.bin came out. Now, I want to upgrade to the full 250 gigs. Can I just re-flash with the 250GB hdss.bin using hddhackr? Or would I need to use undo.bin first, restore the original the Western Digital firmware, THEN reflash to the 250 GB hdss.bin?

dcoloane · « **Reply #136 on:** November 25, 2009, 02:15:00 AM »

QUOTE(Constellation @ Nov 19 2009, 02:48 AM)

One question. I previously flashed a 250GB WD hard drive with the 120 GB hdss.bin. This was before the 250GB hdss.bin came out. Now, I want to upgrade to the full 250 gigs. Can I just re-flash with the 250GB hdss.bin using hddhackr? Or would I need to use undo.bin first, restore the original the Western Digital firmware, THEN reflash to the 250 GB hdss.bin?

yes, you need to undo back to normal HDD and reflash as 250GB

SecurityHacker · « **Reply #137 on:** December 03, 2009, 06:09:00 PM »

i just order off newegg Western Digital Scorpio Blue WD2500BEVT next do i place HDDHacker v1.22 in USB that boot to dos ? kind of lost here guys would be very helpful someone help me out with whole usb deal .

PhoneyVirus · « **Reply #138 on:** December 04, 2009, 12:24:00 AM »

QUOTE(SecurityHacker @ Dec 3 2009, 09:09 PM)

i just order off newegg Western Digital Scorpio Blue WD2500BEVT next do i place HDDHacker v1.22 in USB that boot to dos ? kind of lost here guys would be very helpful someone help me out with whole usb deal .

You should put it on a Floppy disc also check out the Links I put together on my Thread HOW TO CREATE WORKING 360 BACKUPS

40_ounce · « **Reply #139 on:** December 04, 2009, 05:03:00 AM »

QUOTE(SecurityHacker @ Dec 3 2009, 05:09 PM)

i just order off newegg Western Digital Scorpio Blue WD2500BEVT next do i place HDDHacker v1.22 in USB that boot to dos ? kind of lost here guys would be very helpful someone help me out with whole usb deal .

Yes just place hddhackr and the hddss.bin file in the usb. when you download the hddss file it will be named like this HDDSS_250GB. Rename it to hddss.bin then put it in the usb. Here is a good tut to make a bootable usb just incase you need one. http://www.bay-wolf.com/usbmemstick.htm

Brahma · « **Reply #140 on:** December 04, 2009, 07:43:00 AM »

QUOTE(Brahma @ Nov 16 2009, 04:50 PM)

Thnx for the application. I installed a WD Scorpio Black WD1600BJKT 160 GB this weekend as 120GB in my Xbox, everything works perfectly

Except Forza 3 save games don't work anymore, I did read that this was also the case with Forza 2. I'm looking to borrow a memory unit now from someone for the save game transfer.

Quoting myself lol... Anyway upgraded the HD now to a WD2500BEKT 250 GB. Forza 3 also works now after transferring the save game (and all other Forza 3 files) with a memory unit. The 160GB HD will go into a friends 360. Does anyone know of a site with info about which games don't work after the upgrade, and which requires a MU?

The games I remember which don't work (and which he has) are Fable 2, Forza 2, Forza 3. He doesn't have any rockband game or such, or some game freefighter or summit.

How to install Forza 3 on new HD
To get Forza 3 to ask if you want to install everything from disk 2 is to make sure you don't have any save game from this game yet on your new HD. If it was copied over with the HD image, delete every Forza 3 save file from your new HD (like save game, ghosts, replays and so on).

Install Forza 3 to HD, say yes to also install disk 2.

When it's done the game will autostart (and you can let it download the update for the game or do this later). Quit the game, delete the save game it automatically made on the HD, insert your memory unit with the Forza 3 save game and all other Forza 3 files you made earlier from your original HD (like ghosts, replays and so on), now move them onto the new HD. Now when you start the game from the HD it'll work again with your old save.

rzwx · « **Reply #141 on:** December 13, 2009, 07:57:00 AM »

lately my 360 20gig hdd crashed ,so i can't get the hddss.bin file from there ,luckily i found on the internet a download with all hddss.bins (20,60,120,250 gig) now i still have my old enclosure,is it possible to use hddhackr with a new 250 gig hdd without the backup from the old hdd ,will it regognize it as a new hdd then ? in other words ,do i need a backup from old hdd

sorry for the english i'm from holland

pdawg17 · « **Reply #142 on:** January 07, 2010, 10:14:00 AM »

Question...my Xbox 360 recognizes my WD 250gb drive fine and I was able to transfer everything from my old 20gb to the new one...the only thing that didn't go as expected is when I ran hddhackr 1.22 and then restarted the computer and entered "hddhackr -f" again it did NOT say it was ready for the Xbox...it would have let me flash again...

Is this going to make my 250gb drive detectable by Microsoft or as long as the bios shows the drive as Hitachi and the Xbox recognizes it as so then that means the flash went "normally"?

porniz89 · « **Reply #143 on:** February 05, 2010, 07:42:00 AM »

QUOTE(pdawg17 @ Jan 7 2010, 06:14 PM)

Question...my Xbox 360 recognizes my WD 250gb drive fine and I was able to transfer everything from my old 20gb to the new one...the only thing that didn't go as expected is when I ran hddhackr 1.22 and then restarted the computer and entered "hddhackr -f" again it did NOT say it was ready for the Xbox...it would have let me flash again...

Is this going to make my 250gb drive detectable by Microsoft or as long as the bios shows the drive as Hitachi and the Xbox recognizes it as so then that means the flash went "normally"?

I have the SAME problem! But if you try to install a game into disk it gave you an error after some percent point?

Author Topic: HDDHackr v1.22 Build 20091022 (Read 1091 times)