Print

[hfidek]

hey i  have big problems too with the 2.9
when i try to burn a backup it give me an error
 Disk Book Type: DVD+R DL
   Image size 7.30 GB (7,835,492,352 bytes)
   Setting Write Speed to: 2.4x (3,324 KB/s)
   Write Speed set to: 2.4x (3,324 KB/s)
   Setting layer 0 capacity at: 1913760 sectors
   Reserving Track; Sectors: 3825923
   Performing Optimum Power Calibration
   Syncing Cache
   Initialization complete
   Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE

try 2 different game the godfather2 and fuel i did the godfather backup myself with a kreon drive
so far 4 coaster

any sugestion???

[Nerdz]

I also had a problem with this version when I tried to burn my HAWX backup. Take a look:

   Disk Book Type: DVD+R DL
   Image size 7.30 GB (7,838,695,424 bytes)
   Setting Write Speed to: 2.4x (3,324 KB/s)
   Write Speed set to: 2.4x (3,324 KB/s)
   Setting layer 0 capacity at: 1913760 sectors
   Reserving Track; Sectors: 3827487
   Performing Optimum Power Calibration
   Syncing Cache
   Initialization complete
   Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
CDB: WRITE(10)
0x2A 00 00 1D 36 D0 00 00 10 00
   Cancelled at LBA: 0x001D36D0 (1914576)
   Syncing Cache
   Closing Track
   Finalizing Disk
Action: Close Disk
Sense Error: 5 / 72 / 04
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
   Finalize Disk Failed
Getting media info [J]
   Media Type: Not Present
   Write failed

What is going on?

[Nerdz]

I burned the .dvd file in IMGBURN instead xbc and it is ok.

I never got problems with xbc 2.8 version, but the version 2.9 seems to be a problem.

[Kloud]

The real question is, does XBC offer any additional features compared to just using abgx360 and ImgBurn? I'm thinking about just getting rid of XBC honestly instead of upgrading, as a patched .dvd file from abgx360 is near perfect.

This post has been edited by Kloud: Jun 16 2009, 01:59 AM

[360repair]

i just got this exact same error!

EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
Finalize Disk Failed
Getting media info [J]

didnt have a problem with 2.8 though!

WTF have they done? it just give me a coaster, wasted a verbatim, im goin to have to go back to 2.8 and burn my game

[DoomSayerSantos]

Anyone alse having very low read speeds with a sata kreon drive ?
In the middle of the game its only reading at 4.6x :/

[Nerdz]

QUOTE(Nerdz @ Jun 11 2009, 11:44 PM)

I also had a problem with this version when I tried to burn my HAWX backup. Take a look:

   Disk Book Type: DVD+R DL
   Image size 7.30 GB (7,838,695,424 bytes)
   Setting Write Speed to: 2.4x (3,324 KB/s)
   Write Speed set to: 2.4x (3,324 KB/s)
   Setting layer 0 capacity at: 1913760 sectors
   Reserving Track; Sectors: 3827487
   Performing Optimum Power Calibration
   Syncing Cache
   Initialization complete
   Starting write
Action: WriteSectors
Sense Error: 5 / 21 / 02
INVALID ADDRESS FOR WRITE
CDB: WRITE(10)
0x2A 00 00 1D 36 D0 00 00 10 00
   Cancelled at LBA: 0x001D36D0 (1914576)
   Syncing Cache
   Closing Track
   Finalizing Disk
Action: Close Disk
Sense Error: 5 / 72 / 04
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK
CDB: CLOSE TRACK/SESSION
0x5B 01 05 00 00 00 00 00 00 00
   Finalize Disk Failed
Getting media info [J]
   Media Type: Not Present
   Write failed

What is going on?

Any news?

[Zee33]

after burning 3 bad discs , I finally burned 2 good ones and the problem was my settings in ABGX 360 stealth checker .

under the misc tab of the program you need to do 2 things .

 1) select your region  
 2) checkmark    splitvid add it if it doesn't exist or is invalid

under the options tab

checkmark check for dvd data corruption if it isn't already checkmarked .

under the autofix automatically tab

change the autofix to level 3 .

save settings then click ok .

I then tested and ran ABGX 360 by hitting the launch button and all checked out . Even the XEX/SS verification and CRC . Then I actually burned the disc using Cookies XBox 360 Burner but am sure it will also work with imgburn as long as your settings are correct in it for writing to D/L .

My settings were wrong in abgx thats why I was getting the invalid write address . Thinkin it was cause of the vid not being split on the 2 layers . had nowhere to write to .


Hope this helps .

[Murteira_Nabo]

No Stealth Check? Use abgx? Man... I use both. I just got a ISO here that passes all abgx tests but fails the PFI and following test in the previous Xbox Backup Creator... Any ideas?

[triplepf]

ok i just downloaded this and it wont let me rip call of duty world at war. the start thing is greyed out. also it says this is not a true 1 to 1 copy of the image. i have a dl drive. do i have to have sum other program installed? i really want to back this game up its my second one i had to buy so far

[DaSoP]

Hi guys! Does anyone noticed low burning speeds? With 2.8 ver everything was just fine!
Now with 2.9 90% of the burned discs keeps burning at... 0.3x!!!! Yeah I know! 5:50 (Yeap this is 5 hours 50 minutes) for a backup is way to much! The disc is playing ok but why is this happening?
Sometimes it is working like it should(very rarely though)!

Any hints?

P.S.:Checked in both my recorders Pionneer 112 and 116 into two different pcs just the same results! When I am using imageburn everything is fine! No nero or any other burning softare installed! The first pc has XP pro media center and the other Xp pro.

[flameout]

QUOTE(DoomSayerSantos @ May 30 2009, 01:56 PM)

Just select complete backup and press start.
How hard can it be.

The start doesn't light

[neversour]

QUOTE(link375 @ May 30 2009, 09:34 PM)

nvm I got it to work, just installed these drivers. http://www.versiontr...einfo/win/70822 and restarted, now im backing test drive

i have the same problem where the start button is greyed.  all of these driver links don't get you to where you can download anything.  finally i found one driver setup installation .exe file for this.  i ran the file, restarted and still nothings working.  

originally this worked and i was able to back up one of my games. now when i tried to do another one i have this problem where it won't let me start the rip. it recognizes the drive and disk in xbc but start is greyed out.  

i've tried everything and really need some help with this issue.  if the answer is installing these drivers then can you be a little more specific with where to download them and how to install them.  thanks

-dom