xboxscene.org forums

Pages: [1] 2

Author Topic: Jungle Flasher v1.59beta  (Read 249 times)

Xbox-Scene

  • Archived User
  • Hero Member
  • *
  • Posts: 4299
Jungle Flasher v1.59beta
« on: May 03, 2009, 05:07:00 PM »

Jungle Flasher v1.59beta
Posted by XanTium | May 3 19:07 EST | News Category: Xbox360
 
A new beta version of JungleFlasher(info) has been released:
Quote

JungleFlasher 0.1.59 - cleanup to 0.1.55

DVDKey32(info) Support Updated
Added Support for USB Extractor Switch, for remote launch of DVDkey32 from probe
Added optional delay on dvdkey32... allow time for probe.... delay32 in reg, default is 0, max 20 sec

Hitachi Support Updated
Added Stop-Disk to Hitachi commands, People were still putting in a disk, a habit from FWTB days, commands would fail and the drive would crash.
Improvements to Ram upload dump, should dump in 1 - 1.5 sec... added timer for the fun of it...
Introducing USmodeB with JungleUSB drivers, for Hitachi
1. JungleUSB drivers allow Hitachi on USB to be seen in Mode-A, mode-B command can be issued
2. at power up, you may need to open/close the drive to allow windows to PnP fully
3. Send USmodeB - JF will enumerate all windows drive letters and find any Hitachi, JF will send mode-b

General items Updated
* Added, test for port IO....
JF will scan device tree for PortIO, 4 outcomes are possible
i. port io running aok
ii. port removed
iii. port not installed
iv. port io has an error
* Fixed, Ctrl f7 for Drive pororties on PortIO, drives were not being detected
* Added donate icon, users complained they conuldn't see.... ;-)

Official Site: http://jungleflasher.net
Download: here



Logged

somenutter

  • Archived User
  • Full Member
  • *
  • Posts: 119
Jungle Flasher v1.59beta
« Reply #1 on: May 03, 2009, 06:43:00 PM »

hang on so does this allow me to put a hitachi 79fl into mode b with a CK3 connection kit without playing the wma cd ? or whatever it was
Logged

brwcrw

  • Archived User
  • Jr. Member
  • *
  • Posts: 73
Jungle Flasher v1.59beta
« Reply #2 on: May 03, 2009, 07:10:00 PM »

"Added Stop-Disk to Hitachi commands, People were still putting in a disk, a habit from FWTB days, commands would fail and the drive would crash."

If this is what your asking about, then no.  I believe this is referring to the good ol' days when you had to put a retail game/movie in the Hitachi drive as part of getting it into mode-b.  Not necessary with JF

This post has been edited by brwcrw: May 4 2009, 02:13 AM
Logged

somenutter

  • Archived User
  • Full Member
  • *
  • Posts: 119
Jungle Flasher v1.59beta
« Reply #3 on: May 03, 2009, 07:30:00 PM »

QUOTE(brwcrw @ May 4 2009, 01:02 AM) View Post

"Added Stop-Disk to Hitachi commands, People were still putting in a disk, a habit from FWTB days, commands would fail and the drive would crash."

If this is what your asking about, then no.  I believe this is referring to the good ol' days when you had to put a retail game/movie in the Hitachi drive as part of getting it into mode-b.  Not necessary with JF



no i mean this

(Introducing USmodeB with JungleUSB drivers, for Hitachi
1. JungleUSB drivers allow Hitachi on USB to be seen in Mode-A, mode-B command can be issued
2. at power up, you may need to open/close the drive to allow windows to PnP fully
3. Send USmodeB - JF will enumerate all windows drive letters and find any Hitachi, JF will send mode-cool.gif

hitachi on usb,im guessing they mean the usb on ck3 ?
Logged

tomgreen99200

  • Archived User
  • Hero Member
  • *
  • Posts: 826
Jungle Flasher v1.59beta
« Reply #4 on: May 03, 2009, 07:40:00 PM »

sweet app. thanks !!
Logged

brwcrw

  • Archived User
  • Jr. Member
  • *
  • Posts: 73
Jungle Flasher v1.59beta
« Reply #5 on: May 03, 2009, 07:41:00 PM »

hmm, not sure.  

Got a question of my own -"Added optional delay on dvdkey32... allow time for probe.... delay32 in reg, default is 0, max 20 sec"

I'm thinking we have to set the delay ourselves - not sure how to adjust it off of default 0?
Logged

electricace

  • Archived User
  • Newbie
  • *
  • Posts: 1
Jungle Flasher v1.59beta
« Reply #6 on: May 03, 2009, 08:15:00 PM »

jungleusb.inf is not there in the manual install folder
Logged

brwcrw

  • Archived User
  • Jr. Member
  • *
  • Posts: 73
Jungle Flasher v1.59beta
« Reply #7 on: May 03, 2009, 08:50:00 PM »

nvm

This post has been edited by brwcrw: May 4 2009, 03:51 AM
Logged

prankster360

  • Archived User
  • Jr. Member
  • *
  • Posts: 54
Jungle Flasher v1.59beta
« Reply #8 on: May 04, 2009, 12:29:00 AM »

QUOTE(electricace @ May 4 2009, 02:07 AM) View Post

jungleusb.inf is not there in the manual install folder


The usb drivers are not included in the package as they are 'hacked' ms content, you can find them at the usual places.


QUOTE(somenutter @ May 4 2009, 12:35 AM) View Post

hang on so does this allow me to put a hitachi 79fl into mode b with a CK3 connection kit without playing the wma cd ? or whatever it was


You still need to use 79unlock for the hitachi, this has not changed.


QUOTE(somenutter @ May 4 2009, 01:22 AM) View Post

no i mean this

(Introducing USmodeB with JungleUSB drivers, for Hitachi
1. JungleUSB drivers allow Hitachi on USB to be seen in Mode-A, mode-B command can be issued
2. at power up, you may need to open/close the drive to allow windows to PnP fully
3. Send USmodeB - JF will enumerate all windows drive letters and find any Hitachi, JF will send mode-cool.gif

hitachi on usb,im guessing they mean the usb on ck3 ?


No, the drivers are for usb 2 sata adapters, not the usb on the ck3, thats a usb 2 serial adapter for fetching key etc from the liteon drives


QUOTE(brwcrw @ May 4 2009, 01:33 AM) View Post

hmm, not sure.  

Got a question of my own -"Added optional delay on dvdkey32... allow time for probe.... delay32 in reg, default is 0, max 20 sec"

I'm thinking we have to set the delay ourselves - not sure how to adjust it off of default 0?

Yes it's a registry setting, open regedit and adjust the value yourself.
Logged

Martinchris23

  • Archived User
  • Hero Member
  • *
  • Posts: 2004
Jungle Flasher v1.59beta
« Reply #9 on: May 04, 2009, 03:52:00 AM »

QUOTE(brwcrw @ May 4 2009, 01:02 AM) View Post

I believe this is referring to the good ol' days when you had to put a retail game/movie in the Hitachi drive as part of getting it into mode-b.  Not necessary with JF


The disc was needed for raw dumps/writes with FWTB - as correctly stated tho, JF doesn't need this.

Well done Team Jungle - I'm now a fully converted JF user. I do all drives via this app now smile.gif
Logged

blackg1000

  • Archived User
  • Jr. Member
  • *
  • Posts: 55
Jungle Flasher v1.59beta
« Reply #10 on: May 04, 2009, 07:18:00 AM »

I'm assuming this will work with the new 1.6 firmware (when it arrives) but if not, is there any point downloading it till the next version comes out? I get on fine with the current version.
Logged

Paperstack.1

  • Archived User
  • Sr. Member
  • *
  • Posts: 277
Jungle Flasher v1.59beta
« Reply #11 on: May 04, 2009, 09:27:00 AM »

If the changelog doesn't convince you to update, don't download. Simple as that.
Logged

Geremia

  • Archived User
  • Newbie
  • *
  • Posts: 47
Jungle Flasher v1.59beta
« Reply #12 on: May 04, 2009, 01:58:00 PM »

QUOTE(prankster360 @ May 4 2009, 07:21 AM) *

The usb drivers are not included in the package as they are 'hacked' ms content, you can find them at the usual places.



Give them time to startup the 50 thousand dollars machine to rename usbstor360.sys to jungleusb.sys



Logged

danked

  • Archived User
  • Full Member
  • *
  • Posts: 161
Jungle Flasher v1.59beta
« Reply #13 on: May 04, 2009, 11:13:00 PM »

does Jungle Flasher work at all  in with a 64 bit OS ?
Logged

kuiponok

  • Archived User
  • Newbie
  • *
  • Posts: 14
Jungle Flasher v1.59beta
« Reply #14 on: May 05, 2009, 07:03:00 AM »

I can't select(it's gray) 'USE Port IO' for using my VIA VT6421 to flash/read a Hitachi drive.
More people with this problem?
On previous releases(v151 & v155) this worked fine for me, but with the new release this doesn't work anymore.
The only option that is available and already selected is 'USE Win API', so i can't flash with this new JF release.
Luckfully the v155 works fine!  smile.gif

Grtz,

KuiPo
Logged
Pages: [1] 2