Print

[moobypets]

i have a new nvidia bord since my old one just died and whit my old one i could only use the hddhackr on the sata 2 port only one it was working and the other 2 where not  

but it was still ok

now i have a new nvidia bord nforce 430 and when i check msinfo

i get this 2 different sata and i have 4 slot and i want to use the last slot iff possible

Name   NVIDIA nForce Serial ATA Controller
Manufacturer   NVIDIA Corporation
Status   OK
PNP Device ID   PCI\VEN_10DE&DEV_03F6&SUBSYS_26091019&REV_A2\3&2411E6FE&0&40
I/O Port   0x000009F0-0x000009F7
I/O Port   0x00000BF0-0x00000BF3
I/O Port   0x00000970-0x00000977
I/O Port   0x00000B70-0x00000B73
I/O Port   0x0000DC00-0x0000DC0F
Memory Address   0xFE02D000-0xFE02DFFF
IRQ Channel   IRQ 23
Driver   c:\windows\system32\drivers\nvgts.sys (10.3.0.42 built by: WinDDK, 142.53 KB (145,952 bytes), 8/18/2008 6:54 PM)

and the second one

Name   NVIDIA nForce Serial ATA Controller
Manufacturer   NVIDIA Corporation
Status   OK
PNP Device ID   PCI\VEN_10DE&DEV_03F6&SUBSYS_26091019&REV_A2\3&2411E6FE&0&41
I/O Port   0x000009E0-0x000009E7
I/O Port   0x00000BE0-0x00000BE3
I/O Port   0x00000960-0x00000967
I/O Port   0x00000B60-0x00000B63
I/O Port   0x0000C800-0x0000C80F
Memory Address   0xFE02C000-0xFE02CFFF
IRQ Channel   IRQ 23
Driver   c:\windows\system32\drivers\nvgts.sys (10.3.0.42 built by: WinDDK, 142.53 KB (145,952 bytes), 8/18/2008 6:54 PM)


plz could some one tell me what code should i put in the hex editor and where

or just email me a file that has the code already in plzzzzz i need help im not getting this as the code as to be 4 bytes and as to be 7 digit apart im getting lost here and this is out off my league to hex edit

im not that good  (IMG:style_emoticons/default/blink.gif)

This post has been edited by moobypets: Apr 2 2009, 11:11 AM