Print

[heyhi]

iM GOING TO FLASH MY XBOX 360 WHEN I GET MY PARTS.. WHAT I ORDERED
15 IN SATA CABLE
SATA CARD
I HAVE THE DRIVE
MEM PEN USB

nOW i KNOW I NEED JUNGLE FLASHER AND IEXTREME
I KNOW IEXTREME IS THE FIRMWARE AND JUNGLEFLASHER INSTALLS IT IN MY DRIVE

THERES MORE PROGRAMS IVE READ LIKE IPREP ECT... i DONT KNOW WHAT i NEED OR DONT NEED


WHAT ELSE DO i NEED....DOES THE CARD COME WITH A DISC TO INSTALL THE DRIVER
IMKIND OF LOST. THE BEST TUTORIAL I FOUND IS 95% IN ENGLISH BUT WHERE IT TELLS U WHAT TO DOWNLOAD FOR SOME REASON IS IN A DIF LANGUAGE SO I DONT KNOW WHAT TO DOWNLOAD

WHEN I TRYED MANYTIMES TO DOWNLOAD JUNGLE OR IEX  IT TELLS ME TOO CHOOSE A PROGRAN TO OPEN WITH AND I CHOOSE RECOMENDED EXPLORER OR ADOBE READER AND IT DOSENT WORK IM HAVING PROBLEMS DOWNLOADING

I HAVE SP2 AND WIN XP

CAN SOME ONE EXPLAIN WHAT FLASHING IS  FURTHER

 IVE READ ALOT ON IT AND PEOPLE ARE HAVING PROBLEMS LIKE

WNDOWS FREEZING
NOT DETECTING DRIVE
GETTING BANNED FROM XBOX LIVE


WILL THIS CAUSE PROBLEMS IN MY XBOX??
WHAT PROBLEMS MIGHT I RUN INTO?


i KNOW ITS ALOT BUT iF SOME ONE CAN JUST ANSWER SOME QUESTIONS ITL BE HELPFUL

HERES THE TUT IM LOOKING AT    

http://www.crospectator.org/forum/showthread.php?t=15093

I REASEARCHED ALOT AND IM REALLY TRYING TO GET IT RITE THE FIRST TIME WHEN I GET MY PARTS

This post has been edited by heyhi: Mar 25 2009, 01:01 AM

[vb_encryption_vb]

If you want to use jungleflasher i recomend using jungleflashers tutorial....

[heyhi]

QUOTE(vb_encryption_vb @ Mar 25 2009, 04:55 AM)

If you want to use jungleflasher i recomend using jungleflashers tutorial....

I been trying to download jungle flasher and it wont download anyone know why. Ive tryed alot of sites and i click open or save and it takes me to open program with... I click the recomended adobe reader or explorer and it takes me to the run or save option again

[xViSiON2099x]

save it to your desktop. this is probobly a .rar file you need winzip or winrar. right click file on your desktop and select open program with.... and select winrar or winzip the file will open click extract and note where the file is extracting too, open that folder and click the executable .exe.

[xViSiON2099x]

also what dvd drive do u have in ur xbox? cause it does matter and the benq and lite-on are identical the only difference is the model number on ur dvd drive once its out of ur xbox and the other way is to take the faceplate off the xbox and look in the small hole under the dvd drive and see what color wires u have if there yellow u have the new lite-on which requires the ck3 and probe, if there white u got benq. flash a light in the small hole and see what color they are unless you know its another drive you never said what drive it was.

[heyhi]

QUOTE(xViSiON2099x @ Mar 25 2009, 09:03 AM)

save it to your desktop. this is probobly a .rar file you need winzip or winrar. right click file on your desktop and select open program with.... and select winrar or winzip the file will open click extract and note where the file is extracting too, open that folder and click the executable .exe.

Ahhh yea lol i used win zip..took me a while to figure it out but I got jungleflasher downloaded and i think it came with porti032 i installed. problem im having now is that ixtreme links take me to limewire now when i download it from limewire wich was prob stupid and i try to extract it says windows wont allow me to open it to protect my comp

I have the ms25 samsung

This post has been edited by heyhi: Mar 25 2009, 08:00 AM

[xViSiON2099x]

ur lucky u dont have the new lite-on it sux. limewire seems to have a lot of viruses. if ur running vista and ur sure it is a safe file right click the file and say run as administrator. i ended up getting my firmware from xbins after not being able to find any other reliable sources. you can access xbins through mIRC and transfer files using flashfxp there both fast downloads and free.

what type of file did u download from limewire? right click it and click properties then details then look at type

[heyhi]

QUOTE(xViSiON2099x @ Mar 25 2009, 10:12 AM)

ur lucky u dont have the new lite-on it sux. limewire seems to have a lot of viruses. if ur running vista and ur sure it is a safe file right click the file and say run as administrator. i ended up getting my firmware from xbins after not being able to find any other reliable sources. you can access xbins through mIRC and transfer files using flashfxp there both fast downloads and free.

what type of file did u download from limewire? right click it and click properties then details then look at type

I got ixtreme to work.. I was looking at the jungle flasher and 2 things. http://www.360mods.n...ngleFlasher.pdf
1 on page 20 it says i don't need to unlock it because i have ms25.. so where to i skip until

2it says I'm gonna burn something and put it in my xbox drive on page 22
I don't have a dual layer yet i just wanted to flash it

this site shows something else  is it cause this site uses iprep?? if so im gonna use i prep  and ixtreme instead of jungleflasher
http://www.crospecta...ead.php?t=15093



when I ordered all the stuff i was planing on using this tutorial i dont have a dual layer burner  but i got the mem pen drive dvd drive sata cable and sata chip set and I'm guessing the driver that came with jungleflasher (port032) is ok??



so far ive downloaded firmtool iprep 101 ixtreme jungle flasher and port032


i know im almost clue less can some 1 clue me in

is porto32 the via sata 6421a driver?

[xViSiON2099x]

Please note, unmodified Samsung MS25’s have no FirmGuard therefore do not need an unlock method to be applied, simply click Intro / DeviceID and check flash chip properties for status 0x70.

The drive should be in Vendor Mode (0x70) now and return good flash chip properties; you can check under Flash Chip Properties, Drive Properties should show “Drive in Vendor Mode!”.

if ur sammy is showing it is in vendor mode by checking flash chip properties
, then u start at the part of the tutorial where it says "Reading the Firmware From the Drive". as for which tutorial u want to use its completely up to u and which one u feel more comfortable with. if u dont have a dvd+r dl burner u cannot burn xbox 360 games, ull either have to purchase one or find someone who does and get them to burn em for u. also it was telling u to burn a disk just as a way to unlock ur sammy through jungle flasher and there was two other ways also not using any media (dvd+r dl) but u said u didnt have to unlock ur drive anyways so that would be useless. check ur flash chip properties with sammy connected through SATA in jungle flasher. portio is not the drivers for your VIA card. google search
via sata 6421a drivers and download drivers from manufacturer web-site.

This post has been edited by xViSiON2099x: Mar 26 2009, 10:42 PM

[heyhi]

QUOTE(xViSiON2099x @ Mar 27 2009, 12:24 AM)

Please note, unmodified Samsung MS25’s have no FirmGuard therefore do not need an unlock method to be applied, simply click Intro / DeviceID and check flash chip properties for status 0x70.

The drive should be in Vendor Mode (0x70) now and return good flash chip properties; you can check under Flash Chip Properties, Drive Properties should show “Drive in Vendor Mode!”.

if ur sammy is showing it is in vendor mode by checking flash chip properties
, then u start at the part of the tutorial where it says "Reading the Firmware From the Drive". as for which tutorial u want to use its completely up to u and which one u feel more comfortable with. if u dont have a dvd+r dl burner u cannot burn xbox 360 games, ull either have to purchase one or find someone who does and get them to burn em for u. also it was telling u to burn a disk just as a way to unlock ur sammy through jungle flasher and there was two other ways also not using any media (dvd+r dl) but u said u didnt have to unlock ur drive anyways so that would be useless. check ur flash chip properties with sammy connected through SATA in jungle flasher. portio is not the drivers for your VIA card. google search
via sata 6421a drivers and download drivers from manufacturer web-site.

got another damn problem..
I got thereplacement laser for my drive. I unsoldered the bridge and it says open tray or unreadable disc.

Its the same pcb

the first time i unsoldered it ican har the drive working but never read

i tryed unsoldering i again to make sure and it says open tray or unreadable isc

the orig laser wrked for a hile 10 15min and i get a dirt disc error

[heyhi]

why are all the ixtreme1.5 downloads opening up limewire

[heyhi]

sorry guys im not a software guy.. Im flashing a new pcb.

im using this.   http://www.crospecta...ead.php?t=15093

step one install latest drivers I can find that anywhere..

I know imma moron but some one help. Im a hands on guy not software

[heyhi]

Mods please delete this whole thread becuase I got a turorial that explains everything and I have the stupidest questions in the world on here.. when im done il post the tut or any real questions i have as this thread is useless