Topic: 360 Modification Disc v1.52 (Read 1061 times)

1hotjob · « **Reply #90 on:** March 30, 2009, 11:41:00 PM »

QUOTE

I have an xecuter connectivity kit v2, can i use it with the 360 modification disc v1.52?

I am sure it will work just fine. That is what most people use. Just make sure you have one with the switch to turn the drive on and off. DON'T unplug the drive and plug it back in. I can speak from experience after frying two of them. I was really careful but it happens. Now I am the proud owner of a connectivity kit that has a power switch for the DVD drive.

19Ripper75 · « **Reply #91 on:** March 31, 2009, 01:38:00 PM »

I've been thinking about flashing my Lite-On, but my PC doesn't have a serial port. Can Lite-On drives be flashed by USB or only serial? I tried using the search button, but I keep getting an error message

.

buzz44 · « **Reply #92 on:** April 01, 2009, 01:38:00 AM »

QUOTE(19Ripper75 @ Apr 1 2009, 07:14 AM)

I've been thinking about flashing my Lite-On, but my PC doesn't have a serial port. Can Lite-On drives be flashed by USB or only serial? I tried using the search button, but I keep getting an error message

.

You can use a USB (like the Cell Phone Data cable thread) but it will only work in Windows AFAIK because you need the drivers going, and this disc only works on DOS? I don't know as I've never used it

.

Zeosstud · « **Reply #93 on:** April 02, 2009, 08:20:00 AM »

Just wanted to take a second and say Thanks. The 1.52 disc worked exactly as you would expect for me. I flashed 2 drives in about 5 minutes simply by following the instructions. I used the 360's power supply to power up the DVD drive, I unplugged the power from the DVD and plugged it back in as per the instructions, the thing worked as advertised. Both drives were BenQ drives that were previously flashed using iPrep and had iExtreme firmware 1.50 on them. Tested with Trivial Pursuit, Wanted Weapons of Fate and the new Riddick game and everything seems to be cool.

Zeosstud

kay11224 · « **Reply #94 on:** April 02, 2009, 06:59:00 PM »

will this work on the Hitachi 47 ?

Dracc · « **Reply #95 on:** April 02, 2009, 09:50:00 PM »

Um, total noob question here. I've never modded the 360 at all before.

I'm following the directions and once the drive finishes dumping I am prompted to reboot, followed by 'press any key to continue'. Pressing a key does nothing, and rebooting just starts the whole process over. I have the orig.bin file on my c drive now, but nothing else. Am I missing something or is this really all there is to it?

Background info:
Using VIA 6421
Connection Kit 2.0
Samsung TS-H943 drive
360MD1.51

I realize that such a simple app shouldn't need a tutorial, but right now I just can't tell what I need to do next.

FrostyTheSnowman · « **Reply #96 on:** April 03, 2009, 02:13:00 AM »

QUOTE(Dracc @ Apr 2 2009, 10:26 PM)

Um, total noob question here. I've never modded the 360 at all before.

I'm following the directions and once the drive finishes dumping I am prompted to reboot, followed by 'press any key to continue'. Pressing a key does nothing, and rebooting just starts the whole process over. I have the orig.bin file on my c drive now, but nothing else. Am I missing something or is this really all there is to it?

Background info:
Using VIA 6421
Connection Kit 2.0
Samsung TS-H943 drive
360MD1.51

I realize that such a simple app shouldn't need a tutorial, but right now I just can't tell what I need to do next.

The problem is that you are using v1.51, you should use v1.52 of my disc.

On v1.51 my disc can freeze after dumping like that, try using v1.52 and you should be set.

nicholasbgr · « **Reply #97 on:** April 03, 2009, 12:56:00 PM »

FrostyTheSnowman · « **Reply #98 on:** April 03, 2009, 01:54:00 PM »

QUOTE(nicholasbgr @ Apr 3 2009, 01:32 PM)

As said before, I don't recommend using your onboard SATA connections, the only supported SATA chipset is the VIA VT6421 SATA card.

However, you can check the port of your Intel 82801FB Ultra ATA controller (3rd one down) and try that if you are flashing a Samsung drive, but that would be at your own risk. (Lite-On and BenQ drives don't work well under DOS with Intel SATA controllers afaik)

Zeosstud · « **Reply #99 on:** April 04, 2009, 01:11:00 AM »

After 2 successful RRoD repairs this evening using parts found at Lowes and Radio Shack I used your disc yet again to flash both a Samsung and a BenQ, 1.52 working like a champ for me. Thanks, now that I have all my machines up and running again, time to systemlink some new Wav3 games!!

Zeosstud

Dracc · « **Reply #100 on:** April 04, 2009, 05:33:00 AM »

QUOTE(FrostyTheSnowman @ Apr 3 2009, 01:49 AM)

The problem is that you are using v1.51, you should use v1.52 of my disc.

On v1.51 my disc can freeze after dumping like that, try using v1.52 and you should be set.

Thanks for the reply. I was using 1.51 just because I already had it. I'll try .1.52 tomorrow. Keep up the excellent work

1hotjob · « **Reply #101 on:** April 05, 2009, 05:02:00 PM »

I still can't get the files to save on the HD. I have tried different SATA ports on the MB. I have a P5DG2X MB with 4 SATA ports. They are:

2 3
1 4

At first I had the HD connected to 1. I have tried 3 and now 2. I believe 2 is the primary master.

I have two DVD drives connected to the IDE ports.

I was wondering if it would work if I connected the HD to the other connection on the Via card. That wouldn't be a great solution as I would like to get the Xecuter CK3 XT Adapter to prevent me from having to open the PC each time to flash a drive.

I will delete the Samfiles on the HD and see if that helps.

I would appreciate any suggestions.

FrostyTheSnowman · « **Reply #102 on:** April 05, 2009, 08:42:00 PM »

QUOTE(1hotjob @ Apr 5 2009, 06:46 PM)

I still can't get the files to save on the HD. I have tried different SATA ports on the MB. I have a P5DG2X MB with 4 SATA ports. They are:

2 3
1 4

At first I had the HD connected to 1. I have tried 3 and now 2. I believe 2 is the primary master.

I have two DVD drives connected to the IDE ports.

I was wondering if it would work if I connected the HD to the other connection on the Via card. That wouldn't be a great solution as I would like to get the Xecuter CK3 XT Adapter to prevent me from having to open the PC each time to flash a drive.

I will delete the Samfiles on the HD and see if that helps.

I would appreciate any suggestions.

Yeah, try deleting that folder and also try doing a SCANDISK on your HDD, it may be causing the issue. (NTFSDOS tends to freak out if your HDD was not umounted right (shut down properly in Windows) or if it has unresolved bad sectors)

dkellen1 · « **Reply #103 on:** April 06, 2009, 02:01:00 PM »

Hey Frosty!!! Any word on modification disc V1.53? Dosflash would be great for us samsung users whose drives can't be detected with MTKflash. (IMG:style_emoticons/default/blink.gif)

Jah Taz · « **Reply #104 on:** April 10, 2009, 06:35:00 PM »

thank you Frosty for the new disc..... I used it successfully once but on the second sammy flash it fail at writing the 3rd bank this is the error i got :

updating 02% ww fail 70
0%6 status = fo should be 70

when i hooked it up back to the 360 i got error 65.....

good thing i had the key. I had to get a new board and use jungle flasher to flash my key to it thank God for spare parts...lol but its all good now just lost a drive.
I just need to know what went wrong?

Author Topic: 360 Modification Disc v1.52 (Read 1061 times)