Print

[alz123]

hi all

and hi frosty great disc 1.52

did 2 sammy ms28 great
but when i check my c drive for the saved folders they where not there

could you please check this out as the text doc says they are saved to c drive

there where no folders wrote to the c drive at all with any backup files


regards
alz123

[SuicideUZI]

Could someone tell me if this sATA card will work for all drives?
http://www.newegg.co...x...&Tpk=VT6421

or recommend me a specific one that will

its the only one i can find when searching on newegg but a lot of the comments say it only works on MS25 or MS28 drives.

I have a Ben-Q drive that has already been flashed but I didnt do it so I'm not sure what version it has but I want to upgrade it to 1.5 so im trying to figure out everything that I need to try to do it on my own

[lwxlab]

thank you so much

[wulfie]

QUOTE(fatrix @ Mar 27 2009, 02:56 AM)

For me the folder for the sammy was there but both files had a 0kb file size. It modded properly though, just wont have anything to fall back on i guess.

make sure the folder name you're using to dump your fw to is dos compatible..i.e. no longer than 8 characters.  I used 'ofw' for the folder name and my dump showed up as pretty as you please

[FrostyTheSnowman]

QUOTE(SuicideUZI @ Mar 26 2009, 10:16 PM)

Could someone tell me if this sATA card will work for all drives?
http://www.newegg.co...x...&Tpk=VT6421

or recommend me a specific one that will

its the only one i can find when searching on newegg but a lot of the comments say it only works on MS25 or MS28 drives.

I have a Ben-Q drive that has already been flashed but I didnt do it so I'm not sure what version it has but I want to upgrade it to 1.5 so im trying to figure out everything that I need to try to do it on my own

Yes, that card will work just fine for all 3 drives.

[feknoze]

I think i posted this in the 1.51 forum, sorry, that explains why no one had posted anything for a week, feel free to delete previous post.

uhh.gif

Frosty please please help,

hope your' still reading these, I have followed your instructions, I have a 360 xtractor, i get to step3 erasing lite-on drive, says
erasing ok!
erasing finished!

press any key to continue

and thats where it sits.... what do i do now? do i have a brick, I can't see anything else I can possibly do, but i'm scared i've bricked it, if you reply to this quickly you might just save my drive... any ideas? where can I go from here.
PS up to that point it worked like a charm!!!!
I downloaded iso from xbins today i think it was 5.2 now i'm worried it was 5.1...

If I used 9 letters in my folder name is that why i'm where i am now? damn you liteon why couldn't you be liteo

[tonytone55]

need some help and fast. big newbie here and i screwed up a flash for my friends benq. did mine just fine but i just bricked his. the disc backed up the 1.4 fw that was on the drive so i have the key and 1.4 fw. but now the disc wont recognize the drive when i try to flash again. the drive was writing and i had a power surge. so the last bank did not write. what can i do? the green light just blinks really fast and it will open and close. the xbox seems a bit more quiet too. thats all i know please help. trying to fix before he gets home

[dpbmt]

^^ try an alternative method i.e dosflash

[tonytone55]

i am trying that as we speak. been on forums all day to try and fix this. i think dosflash will work. i will give an update in a few.

[wildseal2003]

i tried using this disc on my benq drive and it failed. it said it would save the original in C but instead it saved in D. so now i have a benq drive with nothing in it. it doesnt read any games original or backup. i tried the disc again and it said

"MTK vendor Intro Failed"

i tried it again then i got

"No valid key found"
"check the range key of T:\BENTEMP\\ORIG.bin"

how do i flash my drive???

[feknoze]

QUOTE(wildseal2003 @ Mar 29 2009, 03:25 AM)

i tried using this disc on my benq drive and it failed. it said it would save the original in C but instead it saved in D. so now i have a benq drive with nothing in it. it doesnt read any games original or backup. i tried the disc again and it said

"MTK vendor Intro Failed"

i tried it again then i got

"No valid key found"
"check the range key of T:\BENTEMP\\ORIG.bin"

how do i flash my drive???

give jungleflash a go, at least you have your backup, I had to trawl thru all my PC's before I found my original backup! works on nforce as well as via. as far as i can work out, you tell it to intro, wait turn drive off and on if and when it tells you to (might take a couple of tries), it then gives you the rom info on the right panel, click on write, and bobs your uncle, after completed, click on outro. as far as i can tell intro sets it to writeable, and outro sets it back to read only.

[Orangec]

I have a Silicon image SATA RAID controller, will this work?

[Orangec]

Okay please help i cannot identify my port number for my SATA card, its the 3512 moel type of the silicon image SATA adapter PCI, i tried these ports but none of them work, it always asks me when i read my firmware that the vendor intro gailed or soemthing like that and to disconnect and reconnect the power from the benq drive.

[techmob]

This seems ideal...

is there any guide to this? i know to most people this is a walk in the park, not even needing a guide but to some others including myself, i would like to see this in action before taking the walk

i have the VT6241 RAID card.. i take it i would use the internal port on this to connect my drive to?

thanks

[Orangec]

Agreed.

Also im gonna return the silicon and get the VT6241, i spent all day and this morning trying to get past that vendor intro failed error and tryng to find the right sata port.