Topic: 360 Modification Disc v1.51 (Read 1295 times)

logicwatch · « **Reply #120 on:** March 17, 2009, 03:50:00 AM »

thanks frosty another successful reflash for me this time a benq spoofed as a hitachi 59
worked like clockwork 1.41 to 1.51 in just a few minutes
thank you such a fantastic disc it was so easy

lukx · « **Reply #121 on:** March 17, 2009, 05:48:00 AM »

sorry for probably stupid question...I'm new here... but where is download link ?

logicwatch · « **Reply #122 on:** March 17, 2009, 06:29:00 AM »

I downloaded thru xbins

tvdang7 · « **Reply #123 on:** March 17, 2009, 11:50:00 AM »

i need some assistance. What port number do i put in the command? i have a benq i keep getting an error port problem what the promt for enter y enter comes up. nothing is in my benq backup folder. i use 0x09f0 since thats the port i see in jungle flasher.

FrostyTheSnowman · « **Reply #124 on:** March 17, 2009, 12:29:00 PM »

QUOTE(tvdang7 @ Mar 17 2009, 12:26 PM)

i need some assistance. What port number do i put in the command? i have a benq i keep getting an error port problem what the promt for enter y enter comes up. nothing is in my benq backup folder. i use 0x09f0 since thats the port i see in jungle flasher.

You would want to enter 09F0 as the port number.

However, 09F0 is commonly an onboard Intel SATA controller, which is not supported. You need to find the port for your VIA VT6421 SATA card (if you have one).

You can find a tutorial on my disc for finding your VT6421's port.

blackg1000 · « **Reply #125 on:** March 17, 2009, 01:22:00 PM »

Hi,

When trying to dump the drive for my lite-on I get an error 'DVD-KEY invalid' then it asks me if the dump was successful. I'm not sure if this is or not so I press 'no' and it takes me back to the Hardware options. Could someone let me know if this is OK and if I can actually press 'y' to say it was successful.

Thanks,

blackg1000 · « **Reply #126 on:** March 17, 2009, 02:06:00 PM »

QUOTE(blackg1000 @ Mar 17 2009, 07:58 PM)

Hi,

When trying to dump the drive for my lite-on I get an error 'DVD-KEY invalid' then it asks me if the dump was successful. I'm not sure if this is or not so I press 'no' and it takes me back to the Hardware options. Could someone let me know if this is OK and if I can actually press 'y' to say it was successful.

Thanks,

Forgot to say that when I say no and if I try it again it asks if I want to overwrite the inquiry and identify bin files. I'm pretty stuck here so any help would be huge!!!

GamerAsh · « **Reply #127 on:** March 17, 2009, 02:11:00 PM »

Hey, I've bought the CK3 package, and I'm waiting the unlock tools.

My 360 is an arcade model bought in December 2008 new. It's already flashed at 1.50, I assume it's a lite-on drive due it being new.

What do I need to do? Is there a tutorial somewhere how to do this whole process. I don't want to break my xbox. Thank you very much!

FrostyTheSnowman · « **Reply #128 on:** March 17, 2009, 02:39:00 PM »

QUOTE(blackg1000 @ Mar 17 2009, 02:42 PM)

Forgot to say that when I say no and if I try it again it asks if I want to overwrite the inquiry and identify bin files. I'm pretty stuck here so any help would be huge!!!

If it says your DVD-KEY is invalid, do not continue.

Simply type 'N' at the prompt, and then yes to overwriting inquiry.bin, key.bin, identify.bin, etc. to retry dumping your key.

Do not continue until you get a valid key.

QUOTE(tvdang7 @ Mar 17 2009, 01:30 PM)

i am actually using nforce 4 chipset. is that the problem? also what com port am i sopposed to use. ive tried many different ones now no success.

EDIT i just tried 09f0 and i got my orig.bin!! yay. now what....... the file size is only 60kb.

No chipset other than the VIA VT6421 is supported. (meaning that you could use your NForce4 chipset, but I cannot guarantee that it will work)

The 60kb orig.bin file you created is invalid, it won't work. The 60kb issue is related to a flaw with the NTFS4DOS driver on my disc, which will be fixed with my next release called '360 Modification Disc v1.52' which will be released within about 5-6 hours from now. (i'm at work at the moment, I will be releasing the new version of my disc once I get home)

Wait until my new release is out then try again.

My new disc will have the following changes:

- Improved dumping of the Lite-On drive's DVD-Key
- Corrected serial number information in Lite-On drives
- Fixing the '60kb' issue with Samsung & BenQ ORIG.BIN files
- Fixing the NTFS HDD lockup/freezing issue some users have been experiencing

FrostyTheSnowman · « **Reply #129 on:** March 18, 2009, 03:26:00 AM »

Just a quick update on '360 Modification Disc v1.52'...

The disc is near completed, I am just doing some final testing, expect a release within 24 hours.

blackg1000 · « **Reply #130 on:** March 18, 2009, 04:22:00 AM »

Alright Frosty,

Thanks for the advice with the DVD-KEY is Invalid error but I couldn't for some reason get past this, no matter how many ways I had the tray open, changed COM port etc. so I had to use Jungleflasher instead. Worked like a charm but I still prefer to use your disc so looking forward to your new release. Still got a few Lite-ons to do so keep up the good work.

FrostyTheSnowman · « **Reply #131 on:** March 18, 2009, 10:30:00 AM »

QUOTE(AManOfLOP33 @ Mar 18 2009, 04:29 AM)

Nice. For some reason, 1.5 will read my DVD drive and get into the X: prompt but 1.51 wont (tried on 2 seperate computers and downloaded a couple of times)

The X: prompt was changed to A: in the v1.51 release, as the v1.51 release does not require CD-ROM drivers anymore.

All the files needed are now on the A: drive, so just type 'samsung' 'liteon' or 'benq' at the A: prompt to start modding your 360 drive.

QUOTE(wulfie @ Mar 18 2009, 07:39 AM)

Definately waiting on the update! I'm one of the many that gets stuck at 'reboot your pc', I press a key and it just freezes. I'm trying to flash my sammy and for some reason jungleflasher doesn't even see it, yet this amazing disc does. Here's hoping that this update will allow me to flash my ix1.4 to ix1.51

You can count on my new version (v1.52) being able to mod your drive successfully. The freezing/lockup issues are definitely resolved in this version.

FrostyTheSnowman · « **Reply #132 on:** March 18, 2009, 11:07:00 AM »

QUOTE(wulfie @ Mar 18 2009, 11:37 AM)

Is there any kind of ETA for this latest update (v1.52)?

24 hours or less.

FrostyTheSnowman · « **Reply #133 on:** March 18, 2009, 11:39:00 AM »

QUOTE(wulfie @ Mar 18 2009, 11:47 AM)

was hoping to get my drive flashed today, tis my only day off this week...might have to miss a bit of sleep to get it flashed..

Well, I get off work in about 2 hours, then I have to triple-check my scripting (due to many changes in the drive structure of the disc, example: A: is now C:) test 3 stock drives (one of each type), then I will release the disc.

Could be less than 5 hours, depends on how quickly I get 3 stock drives.

wulfie · « **Reply #134 on:** March 18, 2009, 12:25:00 PM »

QUOTE(pyro6314 @ Mar 18 2009, 02:44 PM)

I was about to try to flash my BenQ drive for the first time with your disc until I stumbled across the thread. I guess I will wait but I suggest naming the new version "v1.51 Rev 2" to avoid confusion with the FW release version.

I question about the BenQ drive, people say you need the VIA or NForce SATA chipset and others claim to have done it without. I am going to try on my new ICH10R Intel Southbridge but I dont know if I still need to use the trick shorting the two pins in the drive to get it in recovery mode. I saw that "BenQ Unlock"; does your compilation include parsing the "Magic Codes" to unlock a BenQ drive?

Thanks

Taken from the readme for the 360 modification disc v1.51
Complete Modding Solution for Samsung/BenQ/Lite-On

Author Topic: 360 Modification Disc v1.51 (Read 1295 times)