Print

[ghaladream]

QUOTE(neildo @ Jan 25 2009, 05:55 AM)

GUI doesn't appear and JungleFlasher.exe running at 99% cpu continously.

Had no issues with .26 beta on this setup:

Via 8237 sata on motherboard
Via 6421A pci card

EXACT Same problem. No onboard Sata, Via 6421A PCI Card.

[mUb]

QUOTE(kinvig @ Jan 25 2009, 02:04 PM)

Hi Guys

When using the new version of JF on loading older dummy.bin files created by the older JF, it pops up a window saying,

dummy.bin is missing some drive specific information and that it if possible should re-extract drive info again with the latest tools - proceed anyway ?.

Does anyone know what this specific info is and how detrimental it is to the operation of the console ?

regards

Kinvig

I`m having the same issue here too.  Can anyone shed any light?

[barzi]

Does this version has the new Firmtool 1.3.1? Or still 1.3?

[jelle250386]

QUOTE(mUb @ Jan 25 2009, 08:27 PM)

I`m having the same issue here too.  Can anyone shed any light?

either they failed to code proper dummy.bin recognition
or
if recognition of the firmware is ok, dummy.bin created by the old JF was faulty
or it
could mean they wrote new code to prepare the dummy.bin more properly now

either way its quirky program to me, just use dosflash for liteon , then firmtool that dummy.bin onto the liteonixtreme. i use dosflash for benq/samsung/liteon. i don't require JF

it's a good thing to write a windowsbased all-in flasher that does about everything you could do, but it too big of a project for now i don't use it. if in all glory it oneday works without any issues then i'm real impressed

[Millerboy3]

QUOTE(jelle250386 @ Jan 25 2009, 03:53 PM)

either they failed to code proper dummy.bin recognition
or
if recognition of the firmware is ok, dummy.bin created by the old JF was faulty
or it
could mean they wrote new code to prepare the dummy.bin more properly now

either way its quirky program to me, just use dosflash for liteon , then firmtool that dummy.bin onto the liteonixtreme. i use dosflash for benq/samsung/liteon. i don't require JF

it's a good thing to write a windowsbased all-in flasher that does about everything you could do, but it too big of a project for now i don't use it. if in all glory it oneday works without any issues then i'm real impressed

+1

[Zan3]

To these who have made it all way in jungleflasher, like Read(of course), erase & write successfull without make the PC freez...
What PC do you guys have? chipset? via card?... what makes it freez like that? im getting my CK3 probe soon and whant to know if im set up to go all the way in jungle flasher.

[antz1970]

great work to all involved in this software etc , what i would like to know is.........is there any major reason to use this version of jungleflasher if the previous version worked fine for you?

[MickRick]

QUOTE(moutainDEW883 @ Jan 25 2009, 05:29 AM)

Is there a guide or tutorial for using jungle flasher to flash a benq drive yet? I have not been able to find one.

Heres my guide if it's any use:

1. Connect your Benq to your pc's sata controller and boot into Windows WITHOUT turning the drive on. Once in Windows, turn the drive on.

2. Start Jungleflasher and click the MTK Flash 32 tab
    At the I/O Port section on the left hand side, select the port that shows your Benq drive in the Drive
    Properties section
    Click the Benq Unlock button - a message will appear saying the drive is unlocked
    Click the Read button and your existing Benq firmware will be read - save this file. It will be called
    BENQ-OFW.bin
   
3. Click the FirmwareTool 32 tab
    Click the Load Source Firmware button and select your BENQ-OFW.bin file
    Click the Open Target Firmware button and select the ix15Benq.bin
    Click Spoof Source To Target button
    Click the Save To File button - save as Benq_CFW.bin

4. Click the MTK Flash 32 tab again
    Click Write and your drive will first be erased and then the Benq_CFW.bin will be written to your drive.

Thats it really.

QUOTE(antz1970 @ Jan 25 2009, 11:03 PM)

great work to all involved in this software etc , what i would like to know is.........is there any major reason to use this version of jungleflasher if the previous version worked fine for you?

I'm thinking the FirmTool 32 Liteon bug has been resolved with this release.

QUOTE(Zan3 @ Jan 25 2009, 10:40 PM)

To these who have made it all way in jungleflasher, like Read(of course), erase & write successfull without make the PC freez...
What PC do you guys have? chipset? via card?... what makes it freez like that? im getting my CK3 probe soon and whant to know if im set up to go all the way in jungle flasher.

Don't use Jungleflasher for Liteon erase/write. Use Dosflash16 (DOS version) and L-O-Eras.

[somenutter]

QUOTE(Zan3 @ Jan 25 2009, 11:40 PM)

To these who have made it all way in jungleflasher, like Read(of course), erase & write successfull without make the PC freez...
What PC do you guys have? chipset? via card?... what makes it freez like that? im getting my CK3 probe soon and whant to know if im set up to go all the way in jungle flasher.

i didnt make it all the way in jf

To cut a long story short it took me 2 days of pissing around to find out what to do so here gos

get a VIA VT6421A (i already had one) install a fresh copy of windows vista 32bit install all your board drivers etc then install Port IO and the CK3 PRO usb drivers shut down connect CK3 and drive start pc eject liteon push half way back in turn off turn on boot to windows run jf connect probe dump key etc.. but after that it freezes if you try to flash the drive so i dont bother grab xflasher

http://forums.xbox-s...howtopic=674210

and run the program with your usb stick put all of your dumped files in a folder called 12345 thats inside a folder like this on the pen drive usb drive:\BACKUPS\1234567\12345 then rename the hacked firmware you made with jf to hack-lit.bin instead of the name jf gives it otherwise xflasher wont recognise it reboot go into bios change your pc to boot from usb run xflasher when it asks what serial your xbox is put in 1234567 12345 then it will say you must of dumped your keys before so just go ahead and erase the drive and flash it works like a dream  

hope that helps my motherboard is a asus p5k deluxe ive got 4gb of ram and 2 samsung f1s in raid 0 and an nvidia 8800gts

[goaliedude]

Ok i have a quick question with opening 0.0.43 JF as mine won't open for me. I installed the portIO32 from 0.0.28 JF which has worked good for me (5 successful lite-on flashes). I go to open the 0.0.43 JF and it won't open. I uninstall the portIO32 and the 0.0.43 will open. I go to manually install the portIO32 that came with the dl and now my 0.0.43 JF won't open. I may stick with the 0.0.28 since i can actually get into it, but if any1 can help me thanks.

[X-hacker]

I'm also getting trouble.

Installed PortIO, run jungleflasher and my pc freezes for about 10 secs then I get a BSOD...

Something like "INVALID PAGE CALLER" or something along them lines...

Stick with 0.26 I think...

[bill16504]

Flashed a LO today with .43. Worked fine. Although the writing and verifying took a long time. ~3-4 minutes. I also get that error box when a dummy file from .26 is loaded in .43.

MSI mobo with NForce 2 chipset

[tapanet]

"NO VIA SATA PORTS FOUND" in intel 865, the first release .26 beta works fine in my intel. I extracted in winxp (INTEL), and erase and flash in DOS (VIA)

[bishop05]

I used it for my first lite-on, i launched JF with the ck3.
the CPU spiked to 99%, i continued to dump the files, spoofed the FW.
I went to erase and the app froze.

I needed to use iprep to erase the drive with L-O-Eras, I used JF again to flash....



Strange!

XP SP3 (Clean intall)
VIA 6421A PCI card.
intel Motherboaed.

This post has been edited by bishop05: Jan 29 2009, 04:16 AM

[mr2000jp]

doesnt open at all , and black screen after few seconds , i need to restart to go back to windows,
driver is installed ,using via pci card 6421a and winxpsp2 framework 2 installed too, and jf.26 works almost every thing but hangs when flashing ,