Print

[mrCBeezy]

Hello everybody,

I have retrieved my key identify and inquiry files off of my liteon but my computer hung and now I cant eject my drive anymore.  I have read that this is common and all I need to do at this point is insert the key in Iprep and flash it (no need to eject drive)

My question is "where do I insert the file I have made" into Iprep?


Should be an easy answer I just dont want to get it wrong in the flash process.

Thanks!

[SouthMan]

QUOTE(barzi @ Jan 5 2009, 03:11 AM)

No.

Other question:
If you dump the LiteOn files, do you only get the dummy.bin file (Lit-OFW)? Or also the inquiry.bin/identify.bin/key.bin files?

Can someone confirm this?

hi

QUOTE(SouthMan @ Jan 9 2009, 09:35 PM)

hi

May you please assist me i need to buy, the Xtrator device or CK3 pro. ASAP
Can you Please assist me.(WANT TO BUY Xtrator or CK3 pro)
Iam from South Africa,
here is my email address, if is you can refer me or tell me where i can get it PLEASE!!!!!!!!!!!!!!!!!! Any one how can assist me.
[email protected]

[teako]

how i flashed my Lite-on you need the serial cable to work with iprep and ck3 with prob

I had problem with the lite on with it freezing but got the key b4 anything else if you did then your still good, what i did was create the hacked fw with the key i got from jungle flasher
 to get the key i used ck3 and jungleflasher search google on how to do it or go to
http://team-xecuter.com/ck3/liteon_windows.htm

then i build an iprep 008 beta usb and replace the files go to usb drive letter then open folder CFW replace the litCFW on with the one you created with jungle flasher but make sure to renamed lite_CFW to LitCFW
so delete litCFW and copy and paste your Lite_CFW from jungle flasher and rename to LitCFW it should already be a .bin so dont put .bin after the name

then go to backup folder on usb then create a folder renamed it to the first seven digit serial number of the xbox usually behind the faceplate

then create folder in that folder and name it the last five digits of your 360 serial number once that is done place the fw you created in there too and name it LitCFW, it should already be a .bin so dont put .bin after name

restart pc connect with conectivity kit and probe have your drive upside down and open
leave switch off on ck3 until you boot into usb then switch it on make sure blue led not red and type

x's are your serial number in this format

Flit xxxxxxx xxxxx

as you push enter make sure your prob is in the right spot it will ask wich port its on usually the only one that has some info on put in the number for ex mine drive  was number 6) port 1190 so i entered 6
it will earase your drive then ask what to do type

w

then enter

then it will ask the bin name type it while still holding the probe with one hand

LitCFW.bin

push enter and should do what it does and it will finish with a return code then you should b good to go

NOTE: there is an part i dont remember where but it will say to turn off and on the power fot the drive make sure you read everything twice the be sure but when it asks go head and do that with the probe still on point the green led should lessing its brightness thats wen its rdy to write

hope this helps

This post has been edited by teako: Jan 24 2009, 06:37 AM

[teako]

to be more clear as where i got the hacked Firmware

i used jungle flasher to get the key and make the key + inquery and the files it got from the drive and made a lite_cfw.bin in jungleflasher go to the website listed and follow instruction just skip the erase write area and go to the create the bin