Print

[Evilsatan]

I know this wasn't the initial intention of the thread but seeing as it has turned into support I thought this post belongs here.

I have a BEVS-00VAT0, My Sata VT6421 has written the firmware to the drive that I dumped from my original Samsung 360 HD. When I reboot and test it now shows up as a Samsung but says sector 16 has not been written, should it modify it now. I press y and it flashes again. But each time I reboot it gives me the same message. It is also not working in my 360.

I have tried using my onboard SATA ports but they fail to even see the drive and I have tried with 2 laptops which both also fail to even see the drive.

Any ideas?

Thanks

[stewii griffin]

I had to hex edit hddhackr to work with my sy-via-150 but after that it worked fine.

[Hyde88]

Hi,

I've a VIA VT6421 card and i've just purchased a WD1200BEVS scorpio (120GB) . When i use hddhackr , the soft don't find my hdd , i have read the faq of hddhackr but i don't understand how to hexedit the file "hddhackr.com" , when i run msinfo32 and when i go to storage/scsi i've that :



Can you tell me how to hexedit hddhackr.com , i don't understand . Witch bytes have i to replace ?

Thanks.

Ps: Sorry for my bad english , i'm french  

[dmac271]

QUOTE(Hyde88 @ Nov 5 2008, 08:28 PM)

Hi,

I've a VIA VT6421 card and i've just purchased a WD1200BEVS scorpio (120GB) . When i use hddhackr , the soft don't find my hdd , i have read the faq of hddhackr but i don't understand how to hexedit the file "hddhackr.com" , when i run msinfo32 and when i go to storage/scsi i've that :



Can you tell me how to hexedit hddhackr.com , i don't understand . Witch bytes have i to replace ?

Thanks.

Ps: Sorry for my bad english , i'm french  

open hddhackr in hex editor and scroll all the way to the bottom.

youll see the numbers 4D 50 52 54 as being the last numbers

replace those numbers with CF A0 CF 80 and then save the program and restart your computer and re run it.

it should then detect your SATA and work

[Hyde88]

That's work !!!

Thanks a lot man u rox

[dmac271]

QUOTE(Hyde88 @ Nov 6 2008, 12:52 PM)

That's work !!!

Thanks a lot man u rox

glad i could help

[fnice]

I Have a WD1200BEVS-22RST0 SATA HDD

This will work I have had it for a year now and now with the NXE Dash Iwould Like to try and use this if Hddhacker 0.91 will work???

[dmac271]

QUOTE(fnice @ Nov 7 2008, 03:23 AM)

I Have a WD1200BEVS-22RST0 SATA HDD

This will work I have had it for a year now and now with the NXE Dash Iwould Like to try and use this if Hddhacker 0.91 will work???

it should work

[fnice]

Please let me know if this one would work anyone please...

WD Scorpio WD3200BEVT-R

320GB SATA HDD

Only $69.00

Wuld this one work also? if so I would like to buy it. the 120GB last year cost $80.00

[vlj9r]

QUOTE(fnice @ Nov 8 2008, 05:10 AM)

Please let me know if this one would work anyone please...

WD Scorpio WD3200BEVT-R

320GB SATA HDD

Only $69.00

Wuld this one work also? if so I would like to buy it. the 120GB last year cost $80.00

CompUSA (mail order) has the WD1200BEVS for $49.99

http://www.compusa.c...h...D&body=MAIN

[fffttt]

Hi，I just made a 120g hdd using a via vt6421 raid card, and it works well. I did't even need to edit the hddhackr.com file. It was autodected. My suggestion is that if one port dosn't work, plug it into another one and try again.

QUOTE(The_Doctor @ Aug 3 2008, 12:41 AM)

can anyone tell me if a VIA VT6421 Raid card is working for them? i keep getting an error

[vlj9r]

QUOTE(fffttt @ Nov 12 2008, 11:39 PM)

Hi，I just made a 120g hdd using a via vt6421 raid card, and it works well. I did't even need to edit the hddhackr.com file. It was autodected. My suggestion is that if one port dosn't work, plug it into another one and try again.

Weird how the same set up works for some folks but not for others. I'm trying to to make a 120gb hd with a wd1600bevs-22usto and a via 6421a and I'm having no luck loading the hddss.bin on the drive. I can create the undo.bin just fine. The error message is the EC sector count was not found in the FW.

[vlj9r]

I even tried a compaq notebook computer DV6000 that some one reported as working with hddhacker and I could not make it work. It creates the undo file but the I still get the EC sector count was not found in the FW.

WTH!

[fffttt]

QUOTE(vlj9r @ Nov 13 2008, 07:48 PM)

Weird how the same set up works for some folks but not for others. I'm trying to to make a 120gb hd with a wd1600bevs-22usto and a via 6421a and I'm having no luck loading the hddss.bin on the drive. I can create the undo.bin just fine. The error message is the EC sector count was not found in the FW.

my hd is wd1200bevs-22usto.

[bburpee]

I've tried a HP tx2000 laptop and a Sony Vaio laptop with a BEVS-VAT, no luck.

Both computers I get the "No drive found" (or similar) error, and neither laptop has many options to play with in the BIOS Setup, such as Legacy mode.

I've tried every SATA port on these machines, and hex edited the values found in these threads... ending in 60, 60, C0, and another value I can't recall.

The Vaio is a PCG-8Z2L, with an Intel 82801HEM/HBM SATA AHCI Controller (According to Device Manager).

Please, any suggestions are welcomed.