Print

[x.wolverine.x]

QUOTE(x.wolverine.x @ Dec 5 2007, 11:51 PM)

I can't get it to work, I make a boot disk with Samsung and Benq files. I also patched the MTKFalash. For Samsung its working fine, but for the benq I always only get Statu: 0x00

My drive is off when I start "dBen 7-digit serial 5-digit serial"
After this come the message
"Ensure that your Benq DVD is turned OFF"
"press any key to contiune..."
Then I press Enter
Then comes the message where I Press "Y" for Yes again and turned my drive ON after "Y"+Enter.
But then I only get Statu: 0x00

And what I have type in for "7-digit" and what for "5-digit"?

Sorry for thoe newbi questions. But for the Samsung is all working fine.

THX for help a NEWBI  (IMG:style_emoticons/default/biggrin.gif)

OK I got it to Status 0xD1 turn the box off for 2 second then the status changed back to 0x00 and after the 2 seconds I turned the box back on. But the status just changed back to 0xD1.

Can someone help there?
I allrady got the Samsung and the Hitachi to work, but not the benq....  (IMG:style_emoticons/default/sad.gif)

[x.wolverine.x]

QUOTE(x.wolverine.x @ Dec 5 2007, 11:51 PM)

And what I have type in for "7-digit" and what for "5-digit"?

Ok for this STUPID QUESTION SORRY!  

Just the S/N from my box....  

But my Problem is still there... so mutch views but no replay.  

[x.wolverine.x]

QUOTE(x.wolverine.x @ Dec 7 2007, 01:06 PM)

Ok for this STUPID QUESTION SORRY!  

Just the S/N from my box....  

But my Problem is still there... so mutch views but no replay.  

I got it... BUT the Discription is very bad... And when they say your DRIVE have to be turned OFF, in the First Step, THEN it have to BE ON! And just befor resending "y" for the turn it off and after 2 seconds just tun it back on at it works... nothing for whait for Status 0xD1  

[trpsv]

with iPrep 101 v006


do i need to tick Patch MTK Flash

using viasata ts 28

[Intruder7s]

QUOTE(trpsv @ Dec 16 2007, 08:29 AM)

with iPrep 101 v006
do i need to tick Patch MTK Flash

using viasata ts 28

I can't know but I suppose it's better if you do so. Try flashing without patching MTKFlash and if you fail...patch and try again



I am Desperate....

The drive of the xbox says VAD6038...I suppose this is Benq as it doesn't say anithing about labels except the phrase "Philips and Benq Digital Storage Corporation"

My PC has ICH7.
So far so good...or not?

I used iprep loaded iXtreme 1.4 x8,patched MTKFlash and formatted and made a diskete bootable...

I connected the 360's DVD drive to an empty SATA socket if my pc and booted my pc to the diskete I created. ( the xbox 360 is off )

dBen XXXXXXX XXXXX

make sure its off
 press any key...     my 360 is off and I press a key


everything is ok till now...
At the next step I have to press y and then boot up the 360.
I press y the status changed from 51 to D1 and back... I start the 360 the status goes to 80,then D1...nice eh?...I close the 360 for 2 seconds ( I tried it many times with 1-5 seconds ) the status is still D1. I start the 360 again...whathever I do...it remains there

Status 0xD1


I don't know what to do...I changed Sata ports but the only things I got was a constant 7f status and the other thing I got was

360 on=status going from 51 to D1 and back
360 off=D1

I kept swiching it on and off but nothing else happened...
Thanks a lot to someone that can help me...

[Intruder7s]

come on...in the whole forum,isn't there ONE single person able to help ?

[Spinback]

QUOTE(Intruder7s @ Dec 24 2007, 05:30 PM)

come on...in the whole forum,isn't there ONE single person able to help ?

I'm having the same problem, i've flashed a samsung and hitachi before but getting no joy with the benq drive. When i use iprep im told my id is 7000, im using a abit ic7 max3 Motherboard, as i said i've flashed other drives before. I cant get my drive to connect, the only port that works is c000 for some reason, but it responds untill it get to the final stage ie 0x73 but it alwaay flashes over to 0x80 so the flash/read/write command wont work. I so dont need to buy another sata card as i know its possable to get it to work, can someone please help, im going my nut, and have had my xbox for around 2 months now, have plenty of games ready. Please can someone help, cheers

[deilzfcjk]

@Spinback you need to give more details. Your benq is not playing nice. I've tried two so far and only one i was able to do. I also have done multiple sammys and hits.

[hurricane23]

Hi I am new to modding and I am trying to do the firmware hack on my dvd drive I have a toshiba samsung drive on the elite system not sure if that makes a difference or not but anyway i am following textbooks tutorial and I have a via sata card and i made a usb boot disk using i prep with the right firmware 8x i believe and i followed the tutorial but when it boots through usb in the dos section all that comes up is the letter j then a underline flashing next to it and i can't do anything. I forgot to copy the idex or whatever that file name is before making the boot usb so would that be the problem or am i plugging in my xbox at the wrong time i do it when my computer starts loading up just before it goes to the dos section of the tutorial any help would be greatly appreciated thanks.