Print

[TheGlow]

Yea I told em I think the deviceid is either generated from that hddss.bin or from the console its formatted on and to play it safe to bring his console over as well and Ill just give em his profiles and saves and he can get his dlc all over again.

But yea, my 360's got the aids!
i put my old 20gb into my bro in laws 360 and no profiles showed up.
and in my own 360 my sf4 dlc said corrupted. i even copied it back over, it wont load when not on live with the 20gb.
itll load fine on the 120gb when offline.

No idea on how to check a file or something for the HIV eh?
cuz im wondering how long ago I might had this. i was thinking it was maybe the 120gb hdd, b ut maybe it was something from long ago. I did gamesave a couple times for laughs.. guess whos laughing now, hah.

very weird. any idea why the dlc will load off the 120gb offline but not the 20gb? same console and profile...

and any idea why I have a diff id on the 6th offset on 120gb saves?

edit: Concept seems to like to change that 6th offset for whatever reason to something else. Add least that mystery is solved..

This post has been edited by TheGlow: May 20 2009, 11:07 PM

[Porno]

http://www.google.co...g=tp#ps-sellers

Google shows you the cheapest drives after shipping.

[vlj9r]

QUOTE(mk360 @ Apr 20 2009, 03:10 PM)

Hi
i have a problem  
when i type hddhackr -f then i meet this error "information on sector 16 does not match the firmware info"



my original xbox hdd is seagate and new hdd is western digital 1200bevs
and my motherboard chipset is intel
please help me

Search for HDD Capacity Restore 1.2 (crsetup.exe) and run it to restore content on your drive. Other folks have reported success with it.

[jmspike]

Hello Guys ...
First, thanks for all the work.
Well, my problem is weird ...
I did all and it worked ... My XBOX reconize the HD, my saves and profiles ... I didn´t have any problems even with the Arcade games (SSF2THD) ...
BUT ... I can't install any games on the HD ... It always give me a error. But I can install in the 20G HD flawless ... Did I do soething wrong??? My Resident Evil 5 not even begin the installation and give the Dirty disc error in the 120G HD, but in my 20G, install without problems ...
Anyone can help me with this???
Thanks!

[worm4life]

This is driving me batty, I have the drive, HDDHACKR won't detect it. Using the ports is hopeless too. As far as I can tell my AMD controller is incompatible. So that's just great. I wish you guys were as explicit with the controller requirements as the drive requirements.

This post has been edited by worm4life: Jun 18 2009, 04:02 AM

[40_ounce]

QUOTE(worm4life @ Jun 17 2009, 08:01 PM)

This is driving me batty, I have the drive, HDDHACKR won't detect it. Using the ports is hopeless too. As far as I can tell my AMD controller is incompatible. So that's just great. I wish you guys were as explicit with the controller requirements as the drive requirements.

Can you see the hhd without using hddhackr?

[worm4life]

Actually it just started working suddenly. I have no idea why.

[40_ounce]

Maybe it was just windows. sometimes a reboot fixes issues.

[avengingangel]

Here is my experience with the WB1600BEVT Drive.

In Summary... It all boiled down to SATA Chipset... USE THE VT6421 Chipset and you should have no problems at all

I have an Asus motherboard with an Nforce and Silicon SATA chipset.
I tried both these chipsets with both HDDHACKR 0.91 and 1.00 and both gave me problems like "LBA size does not match" and "Drive not compatible" (or something like that).

Once I got my VT6421a PCI board I plugged er in, disconnected all other sata drives, disabled the other two sata chipsets and loaded up HDDHACKR 0.91.  It recognized the drive (the drive actually was recognized with all chipsets and all versions of hddhackr) and flashed in about 2 seconds.  I then rebooted the PC and ran it again and it stated by drive was already flashed and should work in my 360... Sure enough... it done

[hakzo]

will this work with a usb-sata adaptor?

[erikcave]

Maybe someone here can help me.  I have a WD1200BEVS-22RSTO.  I tried all my computers at home and always got the "Error! Drive Not Supported, make sure it a SATA WD Scorpio BEVS!" error.  Today I brought my work computer home and it finally seemed to work.  At least it didn't give me the error.  Instead it told me that it flashed the drive and to turn off the computer and re-run the program. However, every time I re-run hddhackr -f it prepares to flash the drive again.  It never gives me the "ready for xbox 360" message.  It does show the current firmware of the drive as a Fujitsu drive.  I can run the undo command to make it display the WD serial number again.  This is all with version 0.91b or 0.91.  I also tried version 1.00 and I get an "LBA Size Does Not Match" error.

Any help in figuring this out would be appreciated.

[erikcave]

QUOTE(erikcave @ Jun 29 2009, 10:38 PM)

Maybe someone here can help me.  I have a WD1200BEVS-22RSTO.  I tried all my computers at home and always got the "Error! Drive Not Supported, make sure it a SATA WD Scorpio BEVS!" error.  Today I brought my work computer home and it finally seemed to work.  At least it didn't give me the error.  Instead it told me that it flashed the drive and to turn off the computer and re-run the program. However, every time I re-run hddhackr -f it prepares to flash the drive again.  It never gives me the "ready for xbox 360" message.  It does show the current firmware of the drive as a Fujitsu drive.  I can run the undo command to make it display the WD serial number again.  This is all with version 0.91b or 0.91.  I also tried version 1.00 and I get an "LBA Size Does Not Match" error.

Any help in figuring this out would be appreciated.

So, never mind.  On a whim I tried the drive in my xbox again even though I had tried it several times before without it working.  This time it did.  So, I formatted it and everything is good.  My best guess is that it made a difference using v0.91b even though it would never tell me the drive was ready for my 360.

I couldn't get the xtreme 360 program to see my 20 gig drive in my xp system so I just transferred everything using a memory unit.

[hakzo]

Is there a way to copy actual games installed on the old hard drive onto the new one? Would that pose a security risk?

[shoutin420]

I think I am screwed, but maybe someone can help me.  I followed the guide very carefully and successfully formatted my WD drive in my 360 and everything was great.  Then I went to copy over Partition 2 for backward compatibility.  Not sure what I did, but now my original 20 GB drive and 120 GB drive don't show up in the 360 memory section.  Just says "No devices found...".  Anyone able to help me fix this?

 Also, I have another 20 GB 360 drive that I formatted as NTFS.  Is there any way to get it to work in the 360 again?

[XFactordx]

I can't seem to get this to work all the way through.

I'm using a WD1200BEVS - 00UTS0

I've tried using 3 different computers with 3 different SATA chipsets (including VIA and nForce) and I get the same result. When I bring up hddhackr -f, it always stops at "Some SATA device responded ..." and never goes beyond that. I've hex edited hddhackr and also just let it go default, same thing.

On my 3rd different chipset, I set my SATA to Legacy mode and got the "No drive found in Enhanced mode, now scanning in Legacy mode" option and my drive shows up as "(1) WD1200BEVS-00UTS0". When it tells me to type in the Nr of the drive, I hit 1, but then it freezes up and never goes beyond that.

I successfully changed the firmware using hddhackr 1.11, but my XBox has a RRoD, error E68.

Any help is appreciated.

This post has been edited by XFactordx: Aug 27 2009, 09:53 AM