Topic: TheSpecialist's HDDHackr v0.91 - Adds Support for WD BEVS-RST Drives (Read 6224 times)

uturn68 · « **Reply #585 on:** January 29, 2009, 01:48:00 PM »

did you have to do any hex editing? i'd gladly get you the undo if only i could get this to flash. im gonna try a friends computer since i cant seem to find how to disable my raid controller.

njmbb8 · « **Reply #586 on:** January 29, 2009, 09:52:00 PM »

nope no hex editing at all just be sure to use xplorer extreme build 2

gogaxis · « **Reply #587 on:** January 30, 2009, 02:19:00 PM »

Hi all!I'm a newbie there.I'm from Russia.
Some days ago i managed to buy a WD1200BEVS-00UST0
I personally had some problems with flashing because of my chipset.But today one my friend helped me to make it usable with Xbox.When i came home and tried to use it instead of instead of working it showed me the E69.By the way my original 20 Gb hdd works in right way.What shall i do?
Hoping to get your help.
From Russia with love!

daim · « **Reply #588 on:** January 30, 2009, 05:53:00 PM »

Hi Folks. Got a question. If you are able to get the hddss.bin file from an original M$ 120GB Fujitsu drive. How can you transfer that onto another unmodified Fujitsu MHW2120BH drive? I was able to successfully run the hddhackr and flash a WDBevs drive. Since I have a spare Fujitsu MHW2120BH from a broken laptop, I'd like to be able to use it on my xbox 360. Any ideas?

njmbb8 · « **Reply #589 on:** January 30, 2009, 07:17:00 PM »

the only way i can think of is to ask the specialist about the kind of work you would have to do to make this work on a non bevs/t drive and go through that after getting his permission

gogaxis · « **Reply #590 on:** January 30, 2009, 11:07:00 PM »

QUOTE(gogaxis @ Jan 30 2009, 10:55 PM)

Hi all!I'm a newbie there.I'm from Russia.
Some days ago i managed to buy a WD1200BEVS-00UST0
I personally had some problems with flashing because of my chipset.But today one my friend helped me to make it usable with Xbox.When i came home and tried to use it instead of instead of working it showed me the E69.By the way my original 20 Gb hdd works in right way.What shall i do?
Hoping to get your help.
From Russia with love!

It is a serious problem of mine!I really need some help.

daim · « **Reply #591 on:** January 31, 2009, 10:41:00 AM »

QUOTE(daim @ Jan 30 2009, 08:29 PM)

Hi Folks. Got a question. If you are able to get the hddss.bin file from an original M$ 120GB Fujitsu drive. How can you transfer that onto another unmodified Fujitsu MHW2120BH drive? I was able to successfully run the hddhackr and flash a WDBevs drive. Since I have a spare Fujitsu MHW2120BH from a broken laptop, I'd like to be able to use it on my xbox 360. Any ideas?

Sorry to ask, but how can I get in touch with the specialist? Thanks

deshwasi · « **Reply #592 on:** February 03, 2009, 10:34:00 AM »

Is there a yet simpler step-by-step if i do not have anything to copy from my 20GB? also will i have to do the NXE update and all if i do not copy anything over?

njmbb8 · « **Reply #593 on:** February 03, 2009, 04:04:00 PM »

QUOTE(deshwasi @ Feb 3 2009, 01:10 PM)

Is there a yet simpler step-by-step if i do not have anything to copy from my 20GB? also will i have to do the NXE update and all if i do not copy anything over?

if you have nothing to copy over simply run hddhackr and plug it in and go it will already be set with the nxe

deshwasi · « **Reply #594 on:** February 03, 2009, 04:19:00 PM »

thanks for the reply. i thought of doing what you said but then did the whole thing with partition 2 & 3 so backward compatibility isnt messed up. it just took another half-hour but went smooth.

Sp00nLude · « **Reply #595 on:** February 03, 2009, 08:28:00 PM »

QUOTE(ThePudster @ May 21 2007, 12:45 AM)

Hi TheSpecialist and thanks for all the hard work and time you have done, but i have a problem....

Ok. I have a MS drive, ran hddhackr and got the hddss.bin file needed

Then connected my new WD800BEVS (LAT) drive and ran hddhackr -f this did it's magic and said all was well...

So I shutdown the PC and restarted it and ran hddhackr -f again but it said he info didn't match, and no matter how many times i've ran it it still wont work. the only thing i've noticed is the hddhackr program puts a space infront of the drive's ID, for example say the original is "s1234567890" the wd reports as " s1234567890" (notice the space).

Please could you help me out, i don't know why this is happening.....

Thanks Pudster...

Can someone shed some light on this? I know Specialist PMed him the response. I am experiencing the same thing no matter how I reflash the BEVS, it keeps saying sector 16 info does not match firmware info even though it looks identical.

Thanks...

daim · « **Reply #596 on:** February 04, 2009, 11:20:00 AM »

Looks like you can't PM TheSpecialist...

frandlv · « **Reply #597 on:** February 04, 2009, 02:10:00 PM »

HI MAN, I WONDER IF U CAN HELP ME... I THINK UR MY LAST SALVATION!!

I WANNA FLASH MI XBOX 360 60GB HDD WITH UR HDDHACKR PROGRAM, BUT I CANT! IT SAYS ''TYPE (1 TO 4)'' IN LEGACY MODE, BUT ALL UNMBERS SAYS ''INVALID...''.

I DUN KNOW WHAT TO DO... I WANT BACK MY 60GB HDD

WICH NOW IS WITH A 20GB FIRMWARE AND I CANT FLASH IT WITH A 60GB HDDSS.BIN FILE, COZ THE PROGRAM SEEMS TO BE INCOMPATIBLE WITH MY DRIVE.

PLZ TELL ME HOW I CAN FLASH IT AGAIN WITH A 60GB HDSS.BIN FILE!!

TNX FOR THE SUPPORT...!

(SRY FOR MY ENGLISH!! IM ARGENTINIAN)

early105 · « **Reply #598 on:** February 08, 2009, 11:28:00 PM »

First of all, I wanna say thank you to all the people who contributed their efforts to help people upgrading their 360 HDD by creating tools and giving out advices and guides, as I'm also the one who followed the guides and used the tools, and then replacing the 306 HD to 120G successfully.

I'm using xplorer360 Beta 6 Xtreme build 2 under VISTA 32. I already run xplorer360 under Administrator and in XP SP2 compatibility mode.

I can backup the 20G data thru this program, like backup partition 2 and extract partition 3 data.

However, I get stuck on moving data (partition 3's data) BACK to the new 120G. ( The 120G is already formatted by the 360, and showing 107G available.)

I can see all three partitions. Partition 2 is restored back to the new 120G.

Partition 3 only shows "Cache" directory, and a file called "name.txt"

Xplorer360 Xtreme build 2 does not allow me to drag & drop the files/folders I selected from the PC. Then, I select the command "Insert Folder..." from the Menu Bar. After picking the folder (says "mindex"),

Then, a processing screen pop-up and showing "Injecting folder"; however, there has NOTHING been inserted or copied to the new 120G when the pop-up screen closed.

I hope TheSpecialist can give me some advice on this problem, please. Thank you.

btw, Is the 360 Memory Unit able to do the rest? Thanks.

This post has been edited by early105: Feb 9 2009, 07:32 AM

njmbb8 · « **Reply #599 on:** February 11, 2009, 08:52:00 PM »

can someone who had a 22rst0 drive send me their undo.bin

Author Topic: TheSpecialist's HDDHackr v0.91 - Adds Support for WD BEVS-RST Drives (Read 6224 times)