Print

[LoXodonte]

by worked do you mean it was detected by windows, you could view its contents, could transfer data to it, or all of the above? What application did you use?

[fitsman]

Hi.
Does anyone fix all the bugs that has this program?
And another think is why in the partition 2\Compatibility\tdbx i can't dumb it out(It contentiously repeat the dumbing bar trying it to extract the folder) from my original 20gb hard disk?

A lot of thanks

[johnnyrico]

QUOTE(LoXodonte @ Nov 20 2008, 08:13 PM)

by worked do you mean it was detected by windows, you could view its contents, could transfer data to it, or all of the above? What application did you use?

it worked in windows, could view it contents and transfer data in windows when hooking it up to a native sata controller(intel) instead of eSata on my desktop, worked with the datel Xport software.
xplorer360 didn't work though.
my advice is: use xport.

[hellbelly]

I can't get any version of xplorer360 to work properly with my 60gb drive.  My PC detects it as an Hitachi drive, partition 3 shows up as empty even though it's not, if I put something on it then my 360 doesn't recognise it.

Just wondered what make hdd you other people having trouble with 60gb drives have?

ta
Pete

[hellbelly]

QUOTE(hellbelly @ Dec 1 2008, 01:58 AM)

I can't get any version of xplorer360 to work properly with my 60gb drive.  My PC detects it as an Hitachi drive, partition 3 shows up as empty even though it's not, if I put something on it then my 360 doesn't recognise it.

Just wondered what make hdd you other people having trouble with 60gb drives have?

ta
Pete

should have said - the latest xport (v1.12) detects the drive, but freezes when I select it

[fitsman]

Anyone to answer to my preview question....

[johnnyrico]

^yes, first, use a spelling checker and learn the meaning of the words you type.
second: this is a free homebrew program, you should be happy it even exists.
the writer of it still has a living to make or studies to complete, he can't continuously write code just because you want him to.

This post has been edited by johnnyrico: Dec 4 2008, 10:27 PM

[v_lestat]

i dont think i have ever had this much trouble with a 120gb drive.

flashed the drive... ok
formatted in my 360... ok
tested with a game.. game saves good and visible in the dashboard as a good game save.
107gb space.... ok....


hook the hard drive up to my VIA controller.... boot into windows... DOH!!! fatX error!!

windows sees the drive,,, ok
via controller ok (works in dos to flash the drive)... ok


guys i have seen countless people not able to make the 120gb drives work,, WHY???
i have done this with 2 other drives with NO issues.. ok it was quite a while ago so i bet i am forgetting something but i dont think so...

whats the deal,,,

also when i first tell xplorer360 to open the drive i can here the WD BEVS make a very faint clicking noise as if its locking itself...

so i put the drive back into the 360 and everything is ok...

but xplorer360 will NOT see the drive... whats going on fellas..

p.s.
i made a backup of my 20gb drive 100% perfect, no problems. all 3 partitions saved.

This post has been edited by v_lestat: Dec 5 2008, 07:15 AM

[fitsman]

QUOTE(fitsman @ Nov 30 2008, 09:39 AM)

Hi.
Does anyone fix all the bugs that has this program?
And another think is why in the partition 2\Compatibility\tdbx i can't dumb it out(It contentiously repeat the dumbing bar trying it to extract the folder) from my original 20gb hard disk?

A lot of thanks
 

johnnyrico I just made a question i don't want to offend anyone. Why you attack me...

And the second part of my preview post doesn't anyone knows what exactly is the use of the "tdbx.db" thar is in the folder "partition 2\compatibility\tbdx\"
If i delete it from the original 20gb hard disk or if i don't put it to my new modificated western digital bevs scorpio 120gb hard disk is there a change to have any problem?

A lot of thanks for your time and for your answers.

[v_lestat]

ok i finally got it to go after many hddhackr -f and formatting using the 360.

BUT

using xbplor360 beta6 when i put the individual files on the hard drive from my original drive. (i extracted each partition) everything goes ok, nothing hangs, but when putting the hard drive back in the 30, 1 time it said only 14gigs free, and saw no game saves, or profiles, or anything. another time it saw 30gigs free, no game saves, profiles, etc etc....

whats going on guys, do i need to hex edit this drive like i saw a few pages ago ?
I am VERY confused as to why this is happening.

i tried another 120gb BEVS drive that i use in my unmodded 360 and everything works great....
but this new one,,, weirrrdddd

[paingel5jpg]

Any word on when 60GB support might be coming? I'm sitting on a 60GB drive and a 20GB image.

[xlcasslx]

QUOTE(paingel5jpg @ Dec 12 2008, 05:24 PM)

Any word on when 60GB support might be coming? I'm sitting on a 60GB drive and a 20GB image.

This^

[hellbelly]

I just got my 60GB recognised by using an official Migration Kit, just plugged the USB HDD adaptor into my laptop started up the software and the software recognised it straight away (datels xport 360 v1.12 did anyway, xplorer360 still didn't like partition 3)

Pete

[fitsman]

Does the xplorer 360 beta 6 extreme 2 support the new 60gb hard disk that has in xbox360 arcade?
If it doesn't where i find a version that support it.

A lot of thanks for your time.

[R.J.G.C.B]

I am using Xplorer360.beta6 to transfer media to my Sandisk cruzer micro 4gb (this pen have ready boost) to open later in XBMC but takes ages to transferring something compared to the normal every day use of a pen.
I know this an workaround to my problem that i wouldn´t mind using at all but the slowness makes a big disadvantage compared the way i use to do: transferring thru DVD/CD.

I say that is a workaround because i know that the pen should work with fat32 without any problem and because i know that XBMC reads Fat32 and besides the pen being part the compatible lists (only difference is the last number of the model number.) there also this post http://blog.xbmc.org/forum/showthread.php?t=30771 where they say most work and the only difference is also the last number of the model number.

This post has been edited by R.J.G.C.B: Dec 23 2008, 03:15 PM