Topic: Xplorer360 Beta 6 - Adds Support for 120GB HDD and 512MB MC (Read 1323 times)

hitmanRE · « **Reply #135 on:** April 28, 2009, 06:22:00 PM »

Ahh can someone help me?

Im trying to transfer my data from my 20GB original Harddrive to a 120GB harddrive that is the BEVS series.
I did the HDDHACKr thing and it works but now i need to trasnfer data from the old 20Gb to my new 120GB

dangal · « **Reply #136 on:** April 29, 2009, 01:42:00 PM »

I wanna make a hddss,bin from a 120 gb hard disk from a elite console
Can i use this soft to take one?
Thanks a lot

MonkeyIsle · « **Reply #137 on:** May 16, 2009, 11:05:00 PM »

if anyone has a invite for 360gamesaves.com can you please send me one [email protected] thanks

enrique66_35 · « **Reply #138 on:** May 19, 2009, 03:16:00 AM »

Hey all,

I have a 60GB Hitachi drive and after some unsuccessful back and forth with Codejunkies support they released Xport version 2.06 (download from official website codejunkies.com) which detected my drive.

I should warn that it's a bit buggy but at least it works!

washkow · « **Reply #139 on:** June 15, 2009, 11:46:00 AM »

Does anyone know what the system requirements are for this sucker? Unfortunately, the only computer that has the hardware for hooking up hard drives only has windows 95. Will that work?
thanks!
andy

washkow · « **Reply #140 on:** June 16, 2009, 07:15:00 AM »

Or alternately, can I do the hotswap with xbox starting up a game to unlock the hard drive, then unplugging the IDE from the xbox hard drive and plugging it into a USB-IDE converter cable?
thanks!
andy

crackerboy · « **Reply #141 on:** July 23, 2009, 07:53:00 PM »

I was able to upgrade to a 120gb drive in about an hour...

But now when I try to play rockband I get an error that it stopped loading because of an unknown
error. I believe the answer is to get a memory unit, hook up my old 20gb and move the data from the
20gb to the MU to the 120gb drive.

If there is another way to do it let me know...I tried searching but I must be searching for the wrong terms.

I know it has been mnetioned that other people are having issues with it but I haven't seen a definate answer
that there is no way to fix it....or a definate way to fix it.

etnmich · « **Reply #142 on:** September 13, 2009, 06:11:00 AM »

Note to everyone using Vista and above: You must run it as administrator for it to see your hard drives. It gives the FATX error if you are running it as standard user.

I have one question about this application: Should there be a Partition 1? I can see partitions 0, 2 and 3 in Xplorer360 but they don't contain saved games, themes or other stuff. Both partition 0 and 3 are empty and 2 has Xbox360 system files. Partition 2's index-file does point to Partition 1 though. (Files in \Device\Harddisk0\Partition1\...)

Edit: Never mind the last part. Extreme2 edition shows the files on partition 3.

This post has been edited by etnmich: Sep 13 2009, 01:15 PM

burley · « **Reply #143 on:** October 11, 2009, 03:13:00 AM »

Hello All,

Been looking for some support on accessing my 20gb hdd. So far I haevn't been able to do it.

I have both a XENO and a CK3 hdd connectivity kit, a sata card and internal sata. Both work fine with xbox360 dvd drives.

I own a 20gig hdd, which I'm unable to acces and a 120 gig drive which I am able to acces.

When I hook up the 120 gig drive and boot my pc all is well, the pc boots to XP and detects the drive (using the xeno adapter). Just using sata and molex, no usb. I can acces it using xplorer360, no problem at all.

However when I hook up the 20gig drive and boot my pc, it freezes at the bios. If I hook it up after the bios, the pc freezes again and won't go into xp. If I hook it up after booting, everything looks fine. BUT Xplorer360 gives the error code "Could not find a fatx drive to open"

I have no clue what to do here, tried it every way I know and back, but somehow I'm just unable to connect and acces my 20gig drive. It doesn't matter if I use sata & molex or usb & sata & molex, XENO or CK3.

Does anybody have a clue what I'm missing here? Or what to do?

THX in advance!!

Swahili · « **Reply #144 on:** November 03, 2009, 01:48:00 AM »

Like some people are saying I also get the rockband error. Is there another solution then going the memorycard way?

CamGT · « **Reply #145 on:** February 03, 2020, 12:19:00 PM »

This whole forcing users to register just to see anything, and furthermore, ONLY by invitation thing, is really gay.

maaadkat · « **Reply #146 on:** January 23, 2010, 07:22:00 AM »

Great.

My 360 Elite just came of age (12M) so I thought I'd backup the entire hard disk to my PC just in case the worst comes to the worst and I have to replace it.

So I carefully disassembled the disk box, took the disk out, hooked it up to the PC with a SATA/USB adaptor, and fired up Xplore360.

Got 3 partitions - 0, 2, 3. 3 was full of garbage. Closed the app. Reopened it, opened the disk again. Partition 3 was missing. Read the comments, couldn't figure out why the hell someone would release an app that was compatible with 3rd party Western Digital disks and not Fujitsu disks that come with the XBox, and put the disk back on the console.

Now it says the disk is unformatted. Goodbye to all my data.

Nice. Real fecking nice.

Can someone point me to some specs for the partition schema so I can fix it by hand??

DarkCowMoo · « **Reply #147 on:** January 25, 2010, 01:03:00 PM »

Can I use Microsoft official transfer cable and Xplorer360 to access the files on the HDD?

This cable Link to ebay

Spegs12 · « **Reply #148 on:** January 26, 2010, 06:43:00 PM »

@maaadcat Try this.

CLK Rebellion · « **Reply #149 on:** December 31, 2010, 09:47:00 PM »

QUOTE(gambino90 @ Dec 31 2010, 06:23 PM)

When will it work for my USB drives and also the new xbox 360 250GB hard drive? I really want to modify my game save data.

Where's the older versions?

I don't think Xplorer is in development any more.

Author Topic: Xplorer360 Beta 6 - Adds Support for 120GB HDD and 512MB MC (Read 1323 times)